Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
DC/DC Converters provide 75 watt triple output.
HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...
Read More »Mold Release Coating suits difficult molding applications.
Water-based Frekote(R) Aqualine R-550, when properly applied to preheated surface, chemically bonds to mold surface to form thin, inert, thermally stable coating capable of releasing all natural and synthetic polymers except silicone elastomers. Non-hazardous R-550 offers low mold buildup and is environmentally friendly, formulated with very low levels of VOCs. It cures instantly when applied at...
Read More »Lens-End Lamps eliminate adjustments.
Focused Lens-End Lamps feature 3 deg optical and mechanical axis alignment, which lets users reference lamp body to direct light. They are available from 5 to 13 mm dia and project concentrated beam up to 17,000 Lux. Constructed with glass envelopes, tungsten filaments, and brass sleeves, lamps are offered as vacuum types or filled with gas. Requiring 2.5 to 12 V and 0.20 to 1.0 A, color...
Read More »Amplifier/Conditioner offers side load rejection.
System combines SW0 (universal/tension or compression) and TM0-2 (stand alone bench top amplifier/conditioner), and is suitable for industrial and OEM force measurement and weighing applications. TM0-2 provides excitation, balance, and span adjustment via precision 10 turn pots and shunt calibration. SW0 load cell is offered in ranges from 1,000 to 50,000 lbs.
Read More »Sanitary Mat picks up foot-borne contaminants.
Available in 7 sizes, 6000M10 Tacky Mat(R) utilizes poly foam cushions fixed to base of each sheet, which provide total conformity to shoes under normal pressure. Ten disposable poly foam layers comprise each Tacky Mat. Pressure-sensitive surface picks up dirt and dust from shoes, wheels, and casters. Plastic frame is double contoured for trip-free movement and wheeled equipment.
Read More »Software works with normal or reverse phase HPLC.
Turbo Method Development (TMD) software develops high performance liquid chromatography (HPLC) methods, and performs and documents method robustness studies. Built around company's Series 200 Diode Array Detector, TMD runs in concert with TotalChrom(TM) software. It requires no previous knowledge of sample components, has no restriction on analysis time, and can optimize any mobile phase...
Read More »Imaging Station detects wide variety of labels.
Kodak Image Station 1000 offers thermoelectrically cooled CCD technology. CCD pixel density of 1024 x 1024 and 10x optical zoom produces high resolution (20 micron/pixel at full zoom) as well as 16- and 32-bit image acquisition, which provide linearity of response over wide dynamic range for accurate intensity measurements. ID Image Analysis Software controls Image Station 1000, and provides...
Read More »Preamplifier uses avalanche photodiodes.
C30659-Series includes low noise Gasfet front end, avalanche photodiodes, and hybrid preamplifier in single modified 12-lead TO-8 package. Avalanche photodiodes can be either silicon or indium gallium arsenide and emitter follower is used as output buffer stage. It has strong response between 400 and 1700 nanometers. To obtain wideband characteristics, output of preamp should be ac coupled to...
Read More »Flash Lamp illuminates analytical applications.
Guided Arc Pulsed FX-4400 Xenon Flashlamp provides high-intensity, long-life light source for analytical applications requiring large area illumination or simultaneous sample screening, such as absorption spectroscopy, fluorimetry, HPLC, colorimetry and stroboscopy. Lamp has integral parabolic reflector, concentrated output beam, arc stability, microsecond pulse durations, and high-intensity...
Read More »Image Sensor provides cool pictures.
RA1133J full-frame cooled CCD image sensor is suitable for spectroscopic, biomedical, and related scientific imaging applications. It can be integrated into cameras for continuous high-resolution imaging in low light situations. Two stage thermoelectric cooler enables device to be run 40 deg C below ambient temperature, or -15 deg C compared to room temperature. Low noise and dark current make...
Read More »