Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Switching Power Supplies provide 25 to 320 watts output.
A Series enclosed AD/DC power supplies accept universal input from 85 to 265 Vac. Models provide single/dual/triple/quad outputs from 5 to 48 Vdc. All have soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of -10 to 60 deg C, and include overvoltage and short circuit protection.
Read More »Rackmount Enclosures provides 2 slots in 1U chassis.
PRME Series horizontal rackmount enclosures are designed to cool cards dissipating 55 W per slot. CoolSlot(TM) card guides eliminate cooling dead spots on boards and provide uniform airflow throughout system. Thermal CFD simulation demonstrates 400 LFM per front slot and 100 LFM per rear transition module slot. Two-slot CompactPCI(R) or VME backplanes are available. Power is provided by embedded...
Read More »
Wire Feeders come in single and dual benchtop models.
70 Series provides reliable arc control in heavy and high-volume manufacturing, metal fabrication, and construction applications. Units are compatible with any CV welding power source with 14-pin receptacle and 24 Vac supply. Models 74S (standard), 74D (digital meters), and 74DX (deluxe, full-featured) include automatic run-in and trigger hold. All models include tool-less rotatable drive...
Read More »Swivel Casters move heavy equipment.
StageMaster material handling series consists of 3 dual-wheel swiveling casters affixed to triangular steel plate with 4-sided double ball bearing raceway for stable swiveling under heavy loads. Metal seal keeps dirt and moisture from entering primary swiveling area. StageMaster is available in standard load capacities to 1500 lbs, depending on size and type of wheels applied.
Read More »
Stepping Motors have high torque density.
PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...
Read More »
Power Equipment corrects power factor.
Cutler-Hammer Power Factor Correction line, including harmonic filter products, is available for voltage ranges 240 Vac to 115 kVac and kVAR ratings from 1 to 15,000. Equipment reduces power factor penalties, increases load capacity, and regulates voltage. Line can be used with company's low- and medium-voltage electrical distribution equipment, or retrofitted into any existing power equipment....
Read More »
Oil Skimmer removes grease and oily residue from water.
Model 6-V continuously removes oil and animal and vegetable fats from water in tanks, ponds, and sumps. Fats and oils adhere to closed-loop tube which snakes over and around debris. System lifts tube with oily residue and scum out of water, removes oils with scrapers, and returns clean tube to water surface. It works at below freezing temeperatures, outdoors or in-plant, with lifespan of more...
Read More »
Drum Handlers lift, transport, and dispense.
82A Series has 1000 lb capacity and lifts standard 55 gal drums. It can rotate drum for pouring, lock drum in horizontal position for dispensing, or lock drum in vertical position to prevent spills. Maximum dispensing height is 26 in. for horizontal drum. 82H Series has 1000 lb capacity and moves drums to and from pallets and floor. It can raise drums 34 7/8 in. tall up to 22 in. above floor.
Read More »
Ratcheting Crank Handles can be made of steel or plastic.
Ratcheting Crank Handles consist of steel revolving handles and through squares. Steel stamping bodies are riveted with slim profile gears and reversing lever control in wrench head. Combination crank and ratchet arm allows for safe machinery adjustment, while through hole design allows bolts or shafts to pass entirely through socket to secure nuts on any threaded length. Handles are available...
Read More »Safety System directs people away from hazardous areas.
Guide Rail System(TM) consists of interchangeable components that assemble into standard or custom configurations and lengths. Horizontal guide rails, vertical posts, and corner adapters are made of heavy gauge 6061-T6 extruded aluminum, powder coated in UV weather-resistant safety yellow. Guide rails are available in 5, 10, and 20 ft lengths. Swing arm gate is available in various sizes.
Read More »