Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Screws suit thin sheet metal applications.
Grip-Lite(TM) screws provide tight assembly with strip-out torque that adds to joint strength. Radius point eliminates sharp point that can cause injury and cut wire insulation. It also prevents screw from drilling its own hole if assembly is misaligned. Screws are available in standard head styles in diameters from No. 6 through 5/16.
Read More »
Touchscreen Computer withstands harsh environments.
I-Station(TM), for space-limited applications, operates on WindowsÃ-® platforms and consists of 800 MHz processor, 40 GB drive, and 4 serial ports. Network options include 802.11b wireless. The 15 in. flat-panel screen displays large amounts of data at one time and allows viewing in various lighting conditions. Workers wearing gloves can easily operate touchscreen. Applications include...
Read More »
Card-Reader Extender connects to any installation.
Spanning up to 10,000 ft using 2-conductor, Ethernet, or fiber-optic media, SUPREXÃ-® extends distance between access-control readers and controllers. It provides immediate feedback from diagnostic board and alarm output from central unit indicates power or communication loss with reader at remote unit. Protocol eliminates interference to ensure that reader data arrives intact through noise,...
Read More »
Electrical Connector links solar modules to DC/AC converters.
SOLARLOK interconnection system allows for assembly using hand tools or high speed, semi-automatic applicators. Flexible, UL and TUV approved system accommodates serial and parallel solar module connections. Silver-plated, copper alloy contacts, rated at 25 A, offer contact resistance of 1 milliohm or less. Connector housings are offered with positive and negative polarity keying. Weatherproof...
Read More »
LED Lamps serve as direct incandescent replacements.
With 25 mm Edison-screw bases and light maximizing designs, G25-Style DÃ-©corLED products combine Indium Gallium Aluminum Phosphide and Silicon Carbide/Gallium Nitride LED technologies. Offered with power draws of 1.0-1.7 W and in 6 sunlight-visible colors, 18 solid-state LEDs are configured to disperse light in 270Ã-
Read More »
Surface Mount Inductor Series has open-frame design.
With low-seated profile of 0.079 in. above circuit board, Miniature DR353 Inductor Series offers inductance range of 0.10-560 Ã-µH with DCR from 0.25-28 ohms max over current ratings from 0.700-0.040 A. Product comes in packages as small as 0.100 x 0.126 x 0.079 in. and is compatible with extreme temperature environments from -40 to +130Ã-
Read More »
Safety Switch utilizes multi-magnet technology.
ISIS Safety Switch achieves 6 mm switching in tamper-resistant, resin-filled ABS or stainless steel body with IP67 protection rating. Available in range of voltages, ISIS control units monitor open and short circuit faults while providing 2 NO safety contacts and one NC auxiliary contact. Control units can monitor up to 2 or 4 safety switches, depending on model, and can monitor E-Stop buttons,...
Read More »
Centrifugal Blower provides quiet operation.
Combining non-overloading TEK backward-curved airfoil wheel with NEMA frame motors, precision-balanced TCD Blower meets AMCA B spark-resistant requirements. Noise levels range from 58-82 dBA. Enclosed in epoxy-coated, steel scroll housing, unit incorporates BCA impeller, manufactured of glass-reinforced polyamide. Additional features include flanged and drilled outlet, ABS inlet cone, CW rotation...
Read More »Microcontroller provides high-speed 8051 processing.
Offered with on-chip debug circuitry, C8051F120 microcontroller family features 100 MIPS (peak) 8051 CPU; 2-cycle, 16 x 16 Multiply-Accumulate unit; and 12-bit ADC and DACs. Suited for mixed-signal embedded control applications that require signal processing, series includes 128 Kbyte Flash memory, 8448 bytes RAM, and is packaged in 100- and 64-pin TQFP. On-chip peripherals include 2% internal...
Read More »Software allows users to track and manage documents.
AutodeskÃ-® Vault provides workgroup management capabilities for Autodesk InventorÃ-® Series and Autodesk Inventor Professional software users. Management tool also allows teams of 1-10 users to immediately and securely track documents and changes, locate documents, manage libraries, and support concurrent engineering.
Read More »