Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Flow Meter is rated IP 65/NEMA 4.
Smart Flow Meter is available in two capacities, Model SFM 275A for flows from 180-2,100 ftÃ-³/hr, and Model SFM 350 for flows from 350-7,000 ftÃ-³/hr. Meter can be used as feeder, meter, or batcher with accuracy better than +0.5% or +1%, depending on application. With use of built-in bypass feature, it can be tared at any time during measuring process. Product is suited for high rate...
Read More »
Micro Feeder offers rates as low as 20 g/hr.
Model MT12, offered in loss-in-weight and volumetric feeder versions, is available for continuous or batch operation. Scale in loss-in-weight models can be installed with optional draft shield. Configured for standard industrial or sanitary applications, feeder design allows feeder bowl to discharge almost completely when emptying. Unit will accurately feed rates from 20-2,000 g/hr, depending on...
Read More »
Industrial Boom features complete welding system.
Powered by a hydraulically-driven 208 Vac 3-phase generator and closed-loop hydraulic drive pump, ArcPro(TM) 275 produces 12,500 W continuous and 13,500 W peak ac power. It comes standard with InvertecÃ-® V275-S welding unit, which is capable of both stick and TIG welding, and provides 275 A at 35% duty cycle. Available on Genie S-80/85, S-60/65, and S-40/45 telescopic booms, welder package...
Read More »
Miniature Tubes/Rods target medical applications.
Available in stainless steel, titanium, Inconel and other exotic metals, Custom Rod and Tube components are offered in diameters from .032-1.250 in. and lengths from .032 in. to 12 ft. Solid tubular part end features include bending and contouring, threads, forms, grooves, and cross holes. Parts can be laser etched for part traceability. They are suited for minimally invasive surgical devices...
Read More »Label Printers offer choice of 203 or 305 dpi resolution.
Offering max print width of 104 mm and print length of 400 mm, Series CT provides direct thermal/thermal transfer or direct thermal printing at up to 150 mm/sec. Range of interfaces ensures printers can be connected to any PC or terminal. Systems process data and print continuously even when data and graphics vary on each label. Direct or thermal transfer printers, Series CL, operate at up to 200...
Read More »
TOC Analyzer features detection limit of 4 ppb.
Measuring up to 25,000 ppm, Online TOC-Vc Analyzer enables multipoint calibration curve to be created from single high standard. Unit offers choice of data output via analog mode or RS232. Six contact outputs monitor status, errors, and alarms while contact inputs permit remote start, stop, calibration, and alarm reset. Analyzer is compatible with Total Nitrogen Module for simultaneous carbon and...
Read More »Reversible DC Gear Motor offers output speed of 160 rpm.
Accepting any 12 Vdc power source including batteries, Model MMP.PDSF80-12V.018.1 measures 2.8 in. diameter x 5.6 in. long with 80 mm square gearbox. Output shaft is 10 mm diameter, and is provided with square shaft key and keyway. Equipped with 18:1 gear ratio, motor is rated for 26 lb-in. of continuous torque at 3.9 A of current, and is capable of 70 lb-in. of peak torque. Mounting is...
Read More »
Helical Geared Motors drive all types of machines/equipment.
Rated from 0.075-50 hp, 3-phase Series BG provides output speeds of 0.3-540 rpm and torque range of 177-163,700 lbf-in. Units include stator winding of insulated enameled copper wire, aluminum die-cast cage rotor, and gear wheels made of high tensile and case-hard steel. Gearbox housing is completely enclosed for operation in harsh conditions, protecting motors from dust and water spray, as well...
Read More »
Cleanroom Gowning Benches offer under-the-seat storage.
Designed to meet needs of Class 1 to Class 100,000 cleanroom operations, benches feature wire undershelf for storage of booties and other clothing articles. Users can choose from stainless steel or chrome plated wire benches featuring 3-sided channel frame and 62% laminar flow. Available in 5 standard lengths from 36-84 in., models are also offered with stainless steel perforated tops. Solid-seat...
Read More »
Mining Jumbo employs twin boom design.
Axera 7 mining jumbo suits applications where heading size ranges from 4 x 4 to 6 x 6 m. Equipped with HLX5-series hydraulic rock drill with 20-22 kW percussion power rating, product drills cross-cuts and bolt holes as well as blast holes from 1 11/16 to 2-½ in. It works with drifter rods up to 16 ft long and comes with two 55 kW electro-hydraulic power packs and articulated carrier with...
Read More »