Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Motion Controller offers fixed speed-scan movement control.
Suited for control-and-scan instrument applications, Preprogrammed Scanning Controller, Model SR1000, instantly reaches optimal smoothness when acceleration starts from zero level. Single-axis unit features selectable functions such as 2 predefined running speeds that allow system to run rates of SLOW to HIGH and HIGH to SLOW, option to achieve S-curve acceleration rates, panel of control input...
Read More »
Enclosures include generator sets from 230-1,000 kW.
Weather-protective and sound-attenuated enclosures are offered in 3 levels of protection: standard, Level I, and QuietSiteÃ-® Level II. Along with all-steel construction and stainless steel hardware, products feature lockable access doors, protected exhaust system, and side-mounted generator controls. Enclosures for 600-1,000 kW product range also feature exterior emergency stop. Depending on...
Read More »Batch Oven provides polyimide baking and curing.
Model PCO2-14(TM) optimizes polyimide cure process for semiconductor wafer devices. It enables consistent, reproducible cure process for all wafers by combining Class 10 clean process operation, inert atmosphere capabilities with less than 20 ppm of oxygen, temperatures up to 350Ã-
Read More »
Power Conversion IC is suited for portable handhelds.
Supporting 3.1-17 V input range, TPS62110 leverages LBC7 analog process manufacturing technology and features integrated FETs in lead-free, 4 x 4 mm QFN package. This 1.5 A synchronous, step-down, DC/DC converter achieves 95% power efficiency and enters PFM mode at light load currents. It supports output voltages from 1.2-16 V, has 1 MHz switching frequency, and can be synchronized to 0.8-1.4 MHz...
Read More »
Operator Interface Terminal has emergency stop switch.
Featuring 24- or 40-key membrane/steel snap dome keypad, handheld QTERM-G55 can be equipped with one EIA-232, -422, or -485 serial port; Ethernet 10Base-T; or Power-over-Ethernet interface. Its 2-pole (4-wire) NC E-stop switch is placed above terminal display to facilitate access without hindering normal terminal operation. HMI terminal has 3.8 in., 320 x 240 pixel color LCD display and uses...
Read More »
Ultrasonic Splicing Systems connect to computer/network.
Ultrasplice 2032 and 2050, with splicing capacities of 0.7-32 and 0.7-50 mmÃ-², respectively, offer anti-side splice feature and 4 levels of quality monitoring. Along with programmable adjustments of splice sequences and ranges, bench-top units incorporate fully retractable anvil that automatically sequences to produce required splice range. Electronic amplitude control is utilized for 1...
Read More »
Stress Test Chambers are available in sizes from 8-64 ft-³.
Equipped with CSZ EZT-550 touch screen controller, Z-Plus temperature/humidity test chambers offer data logging with data access, graphical trending, and remote PC viewer. Roll out shelves support product loads without tipping, and remote software enables desktop monitoring and control. Environmental chambers, available in single stage (-34Ã-
Read More »Document Imaging System outputs up to 26 color pages/min.
Suited for general office environment, KM-C2630D multifunctional product combines print, scan, copy, and fax capabilities. Multi-functional imaging system utilizes color conversion system with auto color calibration technology and provides scan-to-email, scan-to-PC, and LDAP compatibility. Featuring ergonomic design, unit offers various finishing options and uses long-life consumables to minimize...
Read More »Precision RTD Recorder features wireless functionality.
Battery-powered OM-CP-RFRTDTEMP101A incorporates wireless transmitter that, when enabled, transmits readings back to host computer for real-time data analysis. Readings are also logged to device memory for data security, and slide switch allows transmitter to be turned on or off without affecting device operation. Able to be started, stopped, and configured directly from computer, portable...
Read More »
Op-Amps offer low noise and power consumption rate.
Offered in 3 versions, op-amps utilize BiCMOS technology and current-feedback architecture. Model TSH310 requires 400 Ã-µA quiescent current and achieves 130 MHz bandwidth and 115 V/Ã-µsec slew rate. Input noise is 7.5 nv/√Hz typ. With noise as low as 1.3 nV/√Hz, TSH330 provides up to 1.1 GHz bandwidth, 1,800 V/Ã-µsec slew rate and 16 mA quiescent current. Model TSH350, with 410...
Read More »