Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Marking Tool features diamond tip.
Multi-Scribe(TM) sheet metal marking tool handles various materials and can be used for conventional sheet scribing or dot-matrix marking. Depth of mark can be altered as needed to vary from fine to heavy lines. Tool does not deform material or mark underside of sheets. It is available in thick turret, thin turret, StrippitÃ-®, TrumpfÃ-®, and 114 WiedemannÃ-® styles to accommodate...
Read More »
White LED Driver features integrated Schottky diode.
Housed in SC70 package, Model LT3491 drives up to 6 white LEDs from single Li-Ion cell at efficiencies over 75%. It switches at 2.3 MHz, allowing use of tiny inductor and capacitors, while keeping switching noise out of critical RF frequency bands. Chip acts as constant current source, delivering same current to each white LED, regardless of fluctuations in forward voltage drop, ensuring uniform...
Read More »Tap Holding System features one-touch axial adjustment.
With STM Tap Holding System, tap projection length can be adjusted by hand rotating guide ring on outside of toolholder. Axial adjustment range varies depending on size of toolholder, but is as high as 0.591 in. Taps are securely held in place by 1-piece steel spring collets, and are further prevented from rotating by interchangeable preset drivers. System accommodates 1,000 psi of coolant...
Read More »Knife Edge Carrier eliminates buildup on spray dry nozzles.
Twist and Dry(TM) Knife-edge Carrier tapers down from orifice to form sharp ridge at tip, eliminating flat face tip and minimizing buildup and associated hazards. Geometry makes it suited for use in co-current dryers and high fat content product applications. Carrier is compatible with standard Twist and Dry components, facilitating switch with no disruption in drying process.
Read More »Position Sensor measures short-range displacement.
With 3 mm standoff and minimal sensitivity to EMI, electro-optic NanoGage(TM) Model 100 offers linear measurement range of 100 microns and signal capture range of Ã-
Read More »Nylon Pulleys dissipate static electric build up.
Specifically designed and manufactured for static-sensitive applications, Pulleys and Accessories are made of nylon with PAN carbon fiber additives, which stop electrical charge build-up, dissipate charges from high-speed motion, provide grounding path, and prevent discharge to and from human contact. Built up of static electricity can cause end product loss and downtime in manufacturing and...
Read More »
High Flow Underfill cures rapidly at low temperature.
Formulated for use with CSP and BGA packages, LoctiteÃ-® 3549 underfill protects solder joints against shock, drop, and vibration. Material has been tested to JEDEC drop test standards on 0.4 and 0.5 mm lead-free devices. Compatible with lead-free solder materials, underfill is completely reworkable and features a pot life of 14 days at room temperature and 7 days at 40Ã-
Read More »Digital Multimeters include non-contact voltage indicator.
Series 350 testers offer built-in voltage indicator that issues audible and visual signals in presence of live 80-600 Vac circuit. Testers have UL safety rating to CAT III-600V. Model 61-354 with True RMS tests ac/dc current from 2.000-0.000 A, measures 750 Vac/1000 Vdc voltage, 20 Mohm resistance, and offers continuity certification. Model 61-352 performs same tests without True RMS feature,...
Read More »Bore Gauges are titanium nitride coated.
Holtest Bore Gages provide durability and abrasion resistance while making 3-point bore diameter measurements in range above 8 mm bore diameter. Pins made of hardened steel exhibit 1,700-2,000 Hv hardness and shear strength of 4,000 N/mmÃ-². Equipped with digital display and ABS scale with absolute origin, gauge also features constant-force ratchet that minimizes measurement variations...
Read More »Toggle Switches are designed for logic-level applications.
Incorporating sliding twin crossbar contact mechanism, B series process sealed, subminiature PC mount toggle switches feature carbon-impregnated bushing. When configured with support bracket, bushing prevents static discharge. Available in single and double-pole models with 11 circuits in both momentary and maintained, switches are 0.4 VA max @ 28 V ac/dc max. Options include standard bats,...
Read More »