Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Film Laminating System puts thermoplastics onto steel.
Laboratory Co-extrusion Cast Film system laminates thermoplastics onto non-standard substrates such as steel, composites, and advanced engineering materials. It uses large diameter rolls for minimal bending of substrates to reduce stress. Typical system has one 1 in. extruder, two 3/4 in. extruders, panel with computer communications, 16 in. cast film flat die with integral gantry boom, and cast...
Read More »Measurement System is ideal for water treatment facilities.
Accu4 online turbidity measurement system employs USEPA approved Method 2, 4-beam ratiometeric measurement technique to provide accurate low level turbidity measurement. Technique automatically calculates out interferences such as process color and sample chamber fouling. Set of diagnostics is loaded into T53 analyzer allowing assessment of system operational conditions.
Read More »
Sealed AC-LVDTs offer 0.01% (full scale) repeatability.
HSAR 750 Series AC-in/AC-out Hermetically Sealed AC-LVDTs are constructed of stainless steel for environmental robustness. These 3/4 in. position sensors feature radially-mounted electrical connectors, which permit through-bore operation. LVDTs are accessible from both ends to permit mechanical support and core guidance, and are open at both ends for cleaning. They are offered in full scale...
Read More »Mobile Workstation provides 3D animation and CAD/CAM.
Mobility Fire GL 7800 mobile workstation graphics chip for notebook workstations has 64Mbytes of 128-bit double data rate memory, supports 3D resolutions up to 2048 x 1536 pixels in 32-bit color, and has integrated TMDS support for external digital flat panels. It comes with Hydravision multi-monitor management software for up to nine monitors. Work can be spread across entire workspace or...
Read More »
Valve Controller does on-line diagnostics for safety systems.
Fieldview DVC6000 is suitable for use in emergency shutdown solutions for Safety Instrumented Systems (SIS). Its on-line diagnostics and partial stroking eliminate valve as source of failure, reduce test time per valve, increase reliability of shutdown valves, and enable frequent testing. Controller conducts and records diagnostic tests automatically and/or remotely, as needed, and provides time...
Read More »
LED Modules reduce need for additional lamps.
Ultra-Flux Grid LED modules measure 67.62 mm square, and plug into any 0.200 in. pin space with zero clearance between each device. Available in high intensity Super Red and Green, Ultra Yellow, Ultra Orange, and Blue, they feature peak wavelengths of 470-660nm. Applications include signs, truck side lights, moving messages, and other displays.
Read More »
Dock Seals and Shelters keep out inclement weather.
Available for door openings from 8 x 8 ft to 10 x 10 ft, model D-150-XX dock seals and model D-750-XX dock shelters mount around door opening in dock areas. Seal is available with projections from 10 to 20 in. with 36 oz reinforced black nylon facing. Shelter is available in projections of 18, 24, 30 and 36 in. with 54 oz reinforced black nylon facing. Shelter includes 36 in. drop curtain for...
Read More »Conductive Ink prints onto components and cables.
Electrically conductive Type 102-05F screen printable ink, coating and adhesive can be printed onto ribbon cables, flex circuits and other components to provide EMI/RFI shielding. It bonds to Indium Tin Oxide (ITO) sputtered surfaces and can be applied as bus bars onto ITO sputtered surfaces. It adheres to glass, mylar, kapton, ultem and other surfaces. Applications include EMI/RFI shielding,...
Read More »
Strap Device protects Li-ion and Li-polymer battery packs.
PolySwitch polymeric positive temperature coefficient resettable strap device provides overcurrent and overtemperature protection for battery cells. It latches into high resistance state when short circuit or overcharge fault occurs. When fault and power to circuit are removed, device automatically resets for normal operation. Its resettable thermal protection capability permits elimination of...
Read More »Software features 2D to 3D CAD transition tools.
SolidWorks 2001Plus Windows-based 3D CAD software is capable of simulating true motion between solid components. Mate diagnostics are used to define relative position and degrees of freedom between components in an assembly. Top down configurations allow users to sketch relations, equations, and feature end conditions, as well as view what-if design variations. View folding feature lets users...
Read More »