Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
ADC Mezzanine Card offers 6 GB/sec data throughput.
Available in both air-cooled and conduction-cooled rugged versions, ADC512 FPGA Mezzanine Card is 3 GS/sec, 8-bit ADC card that routes high-speed ADC I/O directly to host board FPGA via FMC connector. Dual-channel card's ADC devices support sampling rate of 3,000 MS/sec per channel. By routing ADC interfaces directly to FMC connector, ADC512 enables FPGA on host board to directly control and...
Read More »
Telecentric Lenses handle large-format image sensors.
Designed to eliminate perspective error, TECHSPECÃ-® Large Format Telecentric Lenses can accommodate sensors measuring up to 28.7 mm diagonal. Even with 5 Ã-µm sensors, contrast is greater than 20% across entire field, with telecentricity and distortion of less than 0.1%. Available in C-mount, T-mount, and F-mount models, lenses feature adjustable aperture from F/6-F/22 and locking iris,...
Read More »
UHF Band VCO features ultra low phase noise.
Operating from 390-430 MHz, Model CRO0410A-LF features tuning voltage range of 0.5-4.5 Vdc, typical phase noise of -117 dBc/Hz at 10 KHz offset, and typical tuning sensitivity of 17 MHz/V. Device delivers typical output power of -4 dBm at 5 Vdc supply while drawing 36 mA over temperature range of -30 to 70Ã-
Read More »
Three-Axis CNC Mill is offered with load meter accessory.
Model PCNC 1100 mill is available with PN 31101 Load Meter, which will display real-time spindle load to enable operator to visually monitor cutting performance. Specifically, meter can be used to monitor tool wear as well as troubleshoot both programming and drive performance. Ability to monitor spindle load lets operators and programmers tune speed, feed, cut depth, and other factors,...
Read More »
Disposable Wipe cleans and holds dust.
Available in 9 x 9 in. sheets, single-use Dustinator(TM)3000 is safe to use on all dry surfaces and is suited for cleaning dust from computer screens, desk and counter tops, picture frames, and auto interiors. Soft nature of product does not scratch or mar surfaces or require any sprays to make it effective. Target markets include home cleaning and maid services, hotel chains, furniture stores,...
Read More »
Software exports MapleSim models into Simulink.
With MapleSim Connectivity Toolbox, MapleSim models are automatically converted to S-Function blocks for seamless inclusion in Simulink diagrams. Models created this way are efficient due to MapleSim's symbolic preprocessing and optimized code generation. With help of MapleSim's analysis tools and design documentation abilities, toolbox enables engineers to better understand and reuse their...
Read More »
Flow Transmitters handle corrosive fluids.
Made with CPVC or PVC wetted parts, P420 Series is suited for use in corrosive fluids, water, brine, and low-viscosity fluids. Vortex shedding flow rate transmitters have no moving parts that can stick, bind, or coat. Models with CPVC body can transmit hot water or other fluid with max operating temperature of 180Ã-
Read More »VOC Sensor integrates into IAQ monitoring systems.
Designed for integration by OEMs into Indoor Air Quality monitoring systems, AS-MLV VOC Sensor Component detects presence of VOCs such as alcohols, aldehydes, ketones, organic acids, amines, and aliphatic and aromatic hydrocarbons. Device consumes 40 mW and operates in environments with ambient temperature of -40 to 120Ã-
Read More »Oscilloscopes feature 12.1 in. XGA LCD.
InfiniiVision 7000 Series oscilloscopes, available in 4 models with bandwidths from 100 MHz to 1 GHz, deliver deep-memory waveform update rate of up to 100,000 waveforms/sec. Units are 7 in. deep and weigh 14 lb, with display size enabling up to 20 channels to be shown simultaneously with serial protocol. Configured via number of software options, oscilloscopes deliver optimized signal visibility...
Read More »
CNC Punching and Shearing Machine processes copper buss bar.
Designed for production of copper and aluminum bars for electrical equipment industry, CU-Profi features 45 tons of punching force, thick turret style tooling with punch sizes to 1Ã-¼ in. dia, shear station, and parts unloading station. Material clamping system, also included, eliminates end-of-bar waste. Suited for small to midsize producers, machine supports punching of copper bars up to 10...
Read More »