Aeon Lighting Technology Inc
Taipei TWN
Share:
Lift Tables put parts at proper height.
Lift tables enable workers to position components, work pieces and pallets at the precise height and angle, thus eliminating ergonomic concerns that lead to work-related injuries while improving employee morale. Each comes with UL-approved electrical controller, scissors legs, industrial-grade hydraulic cylinders and oven-baked hard enamel paint.
Read More »
T-1 Cable permits runs up to 550 ft.
Extended distance 1161A Miniature Series T-1 cable simplifies installations and saves space. The low-loss 26 AWG cable is available with up to 32 pairs and is suitable for use as communications cable in riser applications per NEC Article 800 and CEC Part 1 Section 60. Cable has ODs as small as 0.450 in., requires less space than 1249 type cable, is UL Type CMR and C(UL) CMG listed, and permits...
Read More »Event Input Data Logger has a 5-year battery life.
Model EV100 Pro Series Event Input Data Logger features delayed start capabilities and data storage of 65,024 sample points. EV100 can record measurements from 120 to 240 V, and is compatible with model NIP100 multipoint monitor for remote monitoring of multiple instruments from 1 PC. It documents on/off cycle patterns for electrical equipment including pumps, chillers, conveyors and processing...
Read More »
Single Board Computer has dual processors, dual Ethernet.
LBC family of PCI/ISA single board computer has dual 1.26G Hz Intel Pentium III processors, 133 MHz system bus, up to 2 GB SDRAM, dual 10 Base-T/100 Base TX Ethernet controllers, and dual channel UDMA/33 IDE support. It also has USB ports, serial/parallel ports, floppy interface and a PCI SVGA CRT controller with 2 MB of SDRAM memory. It is based on ServerWorks ServerSet III LE chipset and...
Read More »
Debur Cell automates deburring and chamfering.
S 450/750 DBC Gear Debur Cell eliminates need to manually debur and chamfer gears through use of FANUC 6-axis servo-driven robot and programmable controller. Cell can be programmed to perform both top and bottom tooth and root gear deburring and chamfering geometry. Model S 450/750 DBC is available in two sizes: 2 in. through-hole with 18 in. dia, and 4 in. through-hole with 30 in. dia.
Read More »Text Message Displays include 24 K unit memory.
HG1X Series text message displays includes 2 models: HG1X-252 with 16-character, 2-line backlit LCD and 6 function keys; and HG1X-452 with 20-character, 4-line backlit LCD with 8 function keys and numeric keypad. Compatible with PLCs, they draw power from communications ports and have serial ports for printing screens and alarms. Each function key is user-definable; multiple actions can be...
Read More »
Vision Software works with 2D cutting machines
Vision Plus integrated software supports straight or bevel cutting with oxyfuel, plasma, waterjet and laser, plus all current marking devices, in numerous combinations. Users can cut interior geometry with waterjet, laser or precision plasma, then switch to plasma for outside perimeter cut by selecting icons. It allows bevel parts to be programmed in seconds. Software automatically programs...
Read More »
NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...
Read More »
Tie-rod Cylinder features a no-pinch point design.
Micro-Adjust NFPA Tie-Rod Cylinder features calibrated stop collar that allows for precise adjustment of extended stroke. Once adjusted, collar can be locked in place and offers precision scale and 0.001 in. calibration. Standard bore sizes range from 1-1/2 in. to 8 in. with up to 6 in. stroke and adjustment, and various standard NFPA mounts.
Read More »
Cart combines cart and ladder in one unit.
Reach & RollÃ-® Cart features 2-step ladder with non-skid surface that conforms to OSHA and ANSI design guidelines. Spring-loaded steps have skid-resistant rubber feet to prevent cart from moving while user stands on ladder. Steps are 16-1/2 in. wide for stability. Welded frame consists of 1 in. square tubing coated with corrosion and abrasion resistant baked-on epoxy. Cart transports loads...
Read More »