Libelium Comunicaciones Distribuidas S.L.
Zaragoza ESP
Share:
Software logs, tracks, and closes IT project defects.
RADAR web-based software tool helps businesses track, communicate, resolve, and analyze defects and issues in software lifecycle. System can be used at all stages and for all activities of software projects to predict and prevent defects. Able to integrate with other enterprise systems, review-based tool follows SEI-CMM principles and offers 3 levels of security, e-mail notification, built-in...
Read More »![Tension-Measurement System combines load cell and indicator.](https://cfnewsads.thomasnet.com/images/medium/210/21023.jpg)
Tension-Measurement System combines load cell and indicator.
TLL Tension Load Cell and PHM-100 Portable Hand-Held Transducer Indicator system is for industrial and OEM force measurement and weighing applications. PHM-100 has Peak Hold feature that captures at less than 1 msec and operates on 9 V battery for 60 hr. Inline TLL is constructed from stainless and offered in ranges from 5,000 to 50,000 lb.
Read More »![Electronic Torque Wrench prevents over-torquing.](https://cfnewsads.thomasnet.com/images/medium/209/20980.jpg)
Electronic Torque Wrench prevents over-torquing.
Accurate up to 2% clockwise and 4% counterclockwise, TECHWRENCH(TM) allows users to adjust settings by pressing one button. Unit has four separate operating buttons with one function each, which include on, up or down torque selection, and unit of measure. Unit has torque range of 5-100 lb-ft. and can be read in three different units of measure: in.-lb, ft-lb, and Nm. Ergonomic, non-slip handle...
Read More »![Conveyors are available with vacuum option.](https://cfnewsads.thomasnet.com/images/medium/210/21012.jpg)
Conveyors are available with vacuum option.
Made-to-order 3200 Series vacuum conveyors have enclosed frame bottom, port for vacuum source, and perforated belt. Offered with widths to 48 in., lengths are available from 4-30 ft in any 1/8 in. increment. Options include choice of flat belt, cleated belt, and center drive models; end and center drive options; and V-Guide belt. Units have belt speeds to 421 fpm and are suited for maintaining...
Read More »![Ventilation Screen Panel allows air flow in dock area.](https://cfnewsads.thomasnet.com/images/medium/210/21013.jpg)
Ventilation Screen Panel allows air flow in dock area.
Universal(TM) GX-4000 prevents bugs or pests from entering facility. It fits doors up to 14 ft, 2 in. in width. Ventilation panel is made from extruded vinyl slats that surround steel interlocking screen unit. Screen is stainless steel wire and can be ordered with .083 x .083 in. or .030 x .030 in. screen hole size. For keeping inclement weather out of plant, 12 in. high screen comes with fully...
Read More »![Jib and Gantry Cranes offer manual and motorized hoists.](https://cfnewsads.thomasnet.com/images/medium/210/21014.jpg)
Jib and Gantry Cranes offer manual and motorized hoists.
Krane-KingÃ-® gantry cranes are offered in steel and aluminum, with fixed or adjustable heights and capacities of 1-8 tons. Posi-Gantri(TM) load rotation system attaches to new/existing gantry cranes, while rotating leg feature allows either leg to be turned to fit through bottlenecks as narrow as 12 in. Jib cranes are available in base, column, or sleeve mount and mast type in capacities to...
Read More »![CMOS Camera is built around 1504 x 1128 sensor.](https://cfnewsads.thomasnet.com/images/medium/210/21015.jpg)
CMOS Camera is built around 1504 x 1128 sensor.
MotionXtra HG-100K camera features 1.7 megapixel CMOS sensor capable of recording 1,000 frames per sec (fps) at full resolution, and up to 100,000 fps at reduced resolutions. Fast 5 Ã-µsec electronic shutter eliminates motion blur during recording of extremely high-speed events. Gigabit Ethernet enables camera control and rapid image transfer, allowing images to be quickly downloaded to PC...
Read More »![Thermal Die Cutting System suits screenprint and sign shops.](https://cfnewsads.thomasnet.com/images/medium/210/21016.jpg)
Thermal Die Cutting System suits screenprint and sign shops.
OmniPress can emboss, deboss, and foil stamp variety of materials including vinyl, plastics, and foils. It can process 16 x 20 in. sheets and has cutting capacity of 15 x 19 in. OmniPress fits on small tables, uses thermal dies, and can plug into any 110 V outlet. Flip-top platen permits easy die changes and heat blanket system allows precise temperature control.
Read More »![Machining Center offers max spindle speed of 12,000 rpm.](https://cfnewsads.thomasnet.com/images/medium/210/21017.jpg)
Machining Center offers max spindle speed of 12,000 rpm.
Vertical Center (VC) Nexus 510C features high-speed rapid traverse rate of 1417 ipm at 0.5 G acceleration and 2.9 sec chip-to-chip time. Spindle is driven by 25 hp motor. Machining area provides X-axis travel of 41.3 in., Y-axis range of 20 in., and Z-axis travel of 20 in. Table size is 51.18 x 21.65 in. with load capacity of 2640 lb. Tool magazine stores up to 30 tools of 40 taper. Tool-to-tool...
Read More »Device Library provides building blocks for EDA software.
Device Library contains electrical models of NEC Compound Semiconductor Device Ltd's discrete low-noise bipolar transistor products, for use in general-purpose high-frequency designs. Library is configured for use within Ansoft Designer(TM) EDA (electronic design automation) software. It improves design accuracy by supplying vendor-authorized device models directly as ready-to-use components....
Read More »