Libelium Comunicaciones Distribuidas S.L.
Zaragoza ESP
Share:
Bar Feeder offers changeovers in under 1 min.
Featuring 2,100 x 1,100 mm footprint, CNC-controlled VIP 80E is suited for running low-to-medium sized production volumes of round, square, and hex bar stock. New bar loads into lathe spindle while last piece is being machined. Rear-mounted 10-30Ã-º inclined plane loading rack accommodates sixty 10 mm diameter precut bars, and depending on workpiece, VIP 80E can be operated continuously. Max...
Read More »Modular Platform Standard suits automated test systems.
LXI Standard combines built-in measurement science and PC-standard I/O connectivity from rack-and-stack instruments with modularity of cardcage-based systems. LAN connectivity enables modules to reside and be accessed anywhere worldwide. Available in full or half width, self-contained modules include processor, LAN connections, power supply, and trigger inputs. Controlled by computer, modules use...
Read More »Automatic Bar Feeders handle 5-65 mm bars at 450 mm/sec.
Model TS 560 Rack comes with 3-4 superimposed moveable rack magazine with capacity of seventy 25 mm diameter bars, while Model TS 560 Bundle magazine offers 2.5 ton capacity. Change time is 25-30 sec for 12 ft bars. Feeders can be connected to automatic and CNC lathes, either fixed or sliding headstock, and with any type of bar-working machine. Guide channels made of wear-resistant spring steel...
Read More »
NAS Server suits small and medium sized businesses.
Featuring 1 TB of onboard storage, Tiko Classic 340 Networked Attached Storage (NAS) Server is powered by Linux-based TikoNasÃ-® OS v1.1, which is optimized to boot from 64 Mb of Flash memory. Server helps enterprises address critical storage issues relating to disaster recovery, regulated statutory information requirements, and security by utilizing features such as Snapshots, SNMP...
Read More »Bar Feeder complements high-speed CNC lathes.
Equipped with 300 mm, sloping plane, multi-bar magazine, TAL 65 feeds bars from 5-65 mm at 250-500 mm/sec. Dual bar support principle uses hydraulic immersion and dynamic support in elastic guide channel to provide high-speed feeding, even when bars are slightly bent. Closed-loop re-circulating oil system feeds oil into elastic guide channels, eliminating bar vibration. Mechanical...
Read More »RTOS Software supports Blackfin processors.
Designed for Analog Devices' BlackfinÃ-® ADSP-BF531, ADSP-BF532, and ADSP-BF533 processors, POSIX-compliant INTEGRITY RTOS is built on velOSity microkernel and provides embedded applications with absolute security. Software provides each task with resources it needs to run correctly and fully protects operating system and user tasks from errant and malicious code, including denial of service...
Read More »Automatic Bar Feeders replace lathe stock reel.
Models SIR 32 and 25 replace traditional guiding and bar feeding systems. Bar capacities range from 5-32 mm with SIR 32, and 4-25 mm on SIR 25. Bundle bar magazine configuration handles 3500 lb stock. Rack version has 19-step chain bar handling system featuring inclined plane for chain feeding another 200 mm of bar diameter. Magazine capacity is twenty five 32 mm bars or sixty 5 mm bars. Patented...
Read More »
Serial Communication Modules have 8 asynchronous ports.
Models PMC520 (octal 232) and PMC521 (octal 422/485) provide 8 asynchronous serial communication ports from a single PMC carrier slot. Each port is equipped with 64 byte transmit and receive FIFO buffers that minimize CPU interactions, and Baud rate is programmable with data rates of up to 250 Kbps. RTS and CTS handshake support are provided for interface with modems. Other functions include...
Read More »
DC/DC Controller suppresses EMI at its source.
Model LTC3736-1 dual-output, 2-phase, step-down synchronous DC/DC controller has integrated spread spectrum frequency modulation for very low EMI and noise emission. Unit randomly varies switching frequency from 450 to 580 kHz, thereby reducing peak radiated and conducted noise on input and output. It converts input voltages from 2.75 to 9.8 V to output voltages from 0.6 up to VIN. Controller is...
Read More »
Sputter Coater has 4 in. diameter stage.
Hummer 6.6 facilitates coating of samples prior to scanning electron microscopy. With 4 in. diameter stage, unit accommodates up to 12 SEM pin stubs and up to 100 mm dia substrates.
Read More »