Measom Freer
Leicester LE18 2FL GBR
Share:
Nd:YAG Laser trims, repairs and cuts.
Compact diode-pumped Jasper(TM) is suitable for microelectronics trimming and repair, shorting-bar cutting, and LCD panel repair. It has repetition rates from 100 Hz to 10 KHz with output power greater than 2.5W at 10 KHz. Laser can be triggered directly from control panel or from remote source through rear-panel BNC. Most laser functions can also be controlled from PC via RS-232 port. Q-switched...
Read More »
Porometer tests filter materials.
On-Line Multi-Chamber Porometer performs tests on filter media without need to cut out sample. It can determine bubble point, mean flow pore size, pore distribution and gas permeability, including Gurley and Frazier permeability. Filtration medium simply slides through sample chamber. Tests can be performed in less than 10 min on production floor, and tested material is not damaged in any way....
Read More »
Solenoid Valves operate from vacuum to 3,000 psig.
Atkomatic full-ported solenoid valves are available in 2-way, 2-position, normally closed and normally open; direct lift; semi-direct lift; and pilot piston operated. They are offered in 1/8 to 3 in. with connections for gases and liquids up to viscosity of 200 SUS. Ac and dc voltages are available, and most units come with Class H coils. Applications include chemical control, steam control, CO2...
Read More »
Turning Center has 60 degree slant bed.
Storm II 90 turning center is thermally and dynamically insulated, and includes Fanuc CNC control, digital spindle and axis drives. 12-position turret with VDI 30 tooling is standard, plus spindle can be ordered with 4000 or 6000 rpm. Machine includes fittings for chuck sizes up to 8 in. Optional barfeed system is operated and controlled directly from Fanuc control.
Read More »
Carousel/Picking Lifts are available with cantilever platforms.
Six models of carousel or order picking lifts are available which raise and lower operators to facilitate order picking from rack or carousel systems. They offer lowered heights of 8 and 10 in., travels of 60 and 72 in. and capacity of 2000 lbs. Lift speed is 15 sec with remote 5 HP electric hydraulic power unit. Basic platform sizes range from 4 x 9 ft up to 8 x 14 ft.
Read More »
Multiplexer Modules offer RF switching to 2GHz and 3.5GHz.
Model 7711 and 7712 RF Switch Modules are designed for Model 2700 and 2750 Multimeter/Switch Systems. Both offer 50 Ohm, dual 1x4 multiplexer configuration with rear panel SMA connectors. Modules allow flexible signal routing, with either local control through 27xx mainframe's front panel or remote PC control over GPIB or RS-232 interface. Maximum signal level is 30Vrms or 60VDC (30VDC for 7712),...
Read More »
Mass Flow Controller provides high accuracy.
GFC self-contained thermal mass flow controller measures and controls flow rates of gases with +/-1.5% full-scale accuracy. Stainless-steel model has wetted parts of stainless steel, and aluminum model has wetted parts of aluminum, brass, and stainless steel. Built-in, tiltable 3 1/2-digit LCD readout provides readings in direct engineering units. Controller has max flow of 1000 sL/min, max...
Read More »IR Thermometer measures true target temp with accuracy of -
PyrofiberÃ-® II multi-functional, non-contact IR thermometer comes with electronic box, fiber optic cable and sealed sensor head. Microprocessor measures temperature at 1 ms data acquisition rate, allowing digital signals to be output at 70 readings per second. Collected target temperature is output via analog and digital signal to PC or network main frame for analysis. Several models are...
Read More »
Hand Wheel Cover prevents ice build-up.
Easy Grip silicone hand wheel cover fits over first stage reducer hand wheel on SCBA. It insulates aluminum hand wheel preventing cylinder and hand wheel threads from bonding together. Cover prevents water and ice from entering cylinder/reducer connection while allowing thin layers of ice to be removed by squeezing. Easy Grip fits high and low pressure SCBAs and prevents over tightening of hand...
Read More »
Excitation System suits synchronous generators.
ECS2100 provides digital static excitation, voltage regulation, control, protection, and monitoring functions. Multiple microprocessor-based control system uses digital signal processor and integrated communications controller. ECS2100 can be scaled to multiple-sized generation units with minimal changes. Software tool changes settings for limiting and protection functions, downloads new system...
Read More »