Imatek Ltd
Herts SG3 6QJ GBR
Share:
![Tape Measure has automatically locking blade.](https://cfnewsads.thomasnet.com/images/medium/281/28153.jpg)
Tape Measure has automatically locking blade.
AUTO-LOCK(TM) 25 ft tape measure has 1 in. wide blade with bold black numbers that automatically locks into place when pulled out. This prevents blade from springing back into case before length is properly measured and eliminates need for manual locking; user retracts blade via retrieval button. High-visibility yellow casing is safeguarded from knocks and falls by non-slip rubber boot, which...
Read More »![Grease is highly water resistant.](https://cfnewsads.thomasnet.com/images/medium/281/28129.jpg)
Grease is highly water resistant.
ALCO EP-73 Plus(TM) specialty grease, for all metal surfaces, adheres or injects effectively in fresh or salt-water applications. Aluminum complex base mixed with anti-wear additives provides -25 to +400Ã-
Read More »Stereolithography Material provides long-term stability.
RenShapeÃ-® SL 7580 offers ABS-like mechanical properties over extended periods of time. It exhibits rigid flexural modulus of 2,400 MPa and retains high elongation, even after aging for several months. Photopolymer produces opaque white parts that look as if they were injection molded from thermoplastic ABS. Formulated for use on solid-state SLA platforms, RenShape SL 7580 features...
Read More »Gearhead provides 1.5 arc-min accuracy.
Available in Shaft- and Flange-output configurations, Series CSF-GH Quick Connect Gearhead mounts to any motor and maintains all benefits of harmonic drive gearing, including zero-backlash. Adapter flange and clamp-style shaft coupling allow assembly with servomotor. Cross roller bearing, used as output bearing, supports radial, axial, and moment loads. Unit has rated torque of 69 in.-lb, peak...
Read More »Insertion Flowmeter handles high temperature and pressure.
Type 8045HT Insertion Magflowmeter features stainless steel insertion sensor, which shows flow rate and volume, and accommodates charged and uncharged fluids. Meter handles temperatures up to 230Ã-
Read More »![NPT Fittings are rated for 10,000 and 15,000 psi service.](https://cfnewsads.thomasnet.com/images/medium/281/28148.jpg)
NPT Fittings are rated for 10,000 and 15,000 psi service.
High-pressure couplings and adapters, with NPT threaded connections, feature 316 cold-worked stainless steel construction. Straight couplings are available in 6 different connection sizes from 1/8-1 in. Offerings include NPT reducer couplings, male to male NPT adapters with connection sizes from 1/8--½ in., and female-to-male NPT adapters.
Read More »![Nozzle suitable for oil burner installations.](https://cfnewsads.thomasnet.com/images/medium/281/28149.jpg)
Nozzle suitable for oil burner installations.
Able to be used in place of hollow or solid cone nozzles with .40-8.00 gph flow, W Universal Nozzle creates spray pattern that is neither fully hollow nor fully solid. It produces uniform droplet, regardless of flow range. Nozzle provides combustion efficiency to support clean oil heat technology.
Read More »![End Mill works with all types of machines and materials.](https://cfnewsads.thomasnet.com/images/medium/281/28122.jpg)
End Mill works with all types of machines and materials.
TuffCutÃ-® GP 3-flute, solid carbide end mill is available with .01, .02, and .030 corner radii as standard. Tool is suited for all types of machines and materials such as stainless steel, Inconel, and Stellite. TiCN coated, they are available in sizes from 1/8 to 1 in. Both Series 116C (standard length) and 169C (stub length) are suited for long cuts at moderate speeds and feeds.
Read More »![Pump/Motor Baseplates and Guards provide rugged protection.](https://cfnewsads.thomasnet.com/images/medium/281/28125.jpg)
Pump/Motor Baseplates and Guards provide rugged protection.
HDD Series Horizontal Direct Drive Pump/Motor Baseplates and Guards facilitate pump and motor installation while providing protection in harsh industrial applications. Available for NEMA motor frame sizes 56-326, they feature heavy-gauge construction of epoxy powder-coated steel or 304 grade stainless steel. Baseplate/guard includes fully threaded mounting holes. Customized versions are available.
Read More »Distance Sensor measures up to 30 m with -
Model ODSL 30 works without reflectors and is available with analog or digital outputs. It shows measured values on display incorporated into 160 x 79 x 65 mm housing. Switching thresholds and response times can be set to match application. Menu-driven operating system utilizes membrane pushbuttons and LCD display for fine-tuned adjustments of specific applications, such as diameter determination...
Read More »