Comptel Corporation
Helsinki FI-00100 FIN
Share:
![Linear Axis Module handles weights up to 45 lb.](https://cfnewsads.thomasnet.com/images/medium/455/455573.jpg)
Linear Axis Module handles weights up to 45 lb.
Actuated by linear motor, Series LIRAX-M-LD is constructed of drawn aluminum profile with integrated roller guides and has standard stroke length of up to 2,000 mm. Module is available in signal-drive slide version, with feed forces of 11-68 lbf, and twin-drive slide, which doubles feed force to 22 and 136 lbf, correspondingly. Module provides acceleration of 230 ft/secÃ-² and speeds up to 16...
Read More »![Gripper-Swivel Units suit automated assembly applications.](https://cfnewsads.thomasnet.com/images/medium/455/455572.jpg)
Gripper-Swivel Units suit automated assembly applications.
Series GSM is comprised of 3 base swivel unit sizes that can be equipped with 2-finger parallel gripper, 3-finger concentric gripper, 2-finger angular gripper, or 180Ã-
Read More »![Chip Conveyor/Filtration System offers modular design.](https://cfnewsads.thomasnet.com/images/medium/455/455571.jpg)
Chip Conveyor/Filtration System offers modular design.
High Level Drum Filtration System combines conveyor for chip removal and coolant filtration system that can be added at any time. It is capable of removing large chips and stringers, and cleans coolant down to 50 microns. Machine shutdown for sump cleaning is virtually eliminated. System suits CNC metal cutting machine tool applications.
Read More »![Filtration System suits CNC grinding applications.](https://cfnewsads.thomasnet.com/images/medium/455/455570.jpg)
Filtration System suits CNC grinding applications.
Gravity Roll Media Filter, Model GRMC-300 offers coolant flow rate capacity of 30 gpm. Utilizing deep filter cake to provide filtration of grinding swarf, system has positive seal to eliminate fines migration around edges of media. System features 17 in. coolant inlet height and takes 38 in. wide media. It includes integral tank, standard control module, and removable top cover for maintenance.
Read More »![Filtration System suits cast iron and steel applications.](https://cfnewsads.thomasnet.com/images/medium/455/455569.jpg)
Filtration System suits cast iron and steel applications.
Convey-R-Vac permanent media drum filtration system removes chips and filters coolant in CNC metal cutting machine tool applications. Chips and particulate down to 25 micron collect on filter media surface and form filter cake. As cake builds on drum during filtration process, drum indexes 120Ã-
Read More »![Grinding Machines handle thin, pressure-sensitive parts.](https://cfnewsads.thomasnet.com/images/medium/455/455567.jpg)
Grinding Machines handle thin, pressure-sensitive parts.
Employing thin CBN or diamond abrasive wheel, Quickpoint Series 1000, 3000, and 5000 offer range of wheelhead configurations and varying numbers of flip over/tilting spindles. Tilting axis of wheel to horizontal workpiece axis creates relief angle that reduces contact line to point. Series can machine entire right and left shoulders, tapers, chamfers, radii, plunges, and relief grooves on both...
Read More »![Drain protects compressed air systems from contamination.](https://cfnewsads.thomasnet.com/images/medium/455/455568.jpg)
Drain protects compressed air systems from contamination.
Controlled by capacitance sensors, Eco-Drain prevents water, oil, and dirt trapped by air tanks, moisture separators, dryers, and filters from building up and contaminating compressed air systems. Aluminum housing and pilot air-controlled valve technology ensure reliable service, even when subjected to harsh condensate. Features include dry contacts for central alarm signaling, LEDs, and test...
Read More »![Servo-Electric Grippers include position feedback.](https://cfnewsads.thomasnet.com/images/medium/455/455566.jpg)
Servo-Electric Grippers include position feedback.
Two-finger parallel gripper, Model EGN 100 and 3-finger centric gripper, Model EZN 64 feature integrated servomotor and encoder for position feedback and can be actuated in force or positioning mode. EGN 100 offers stroke range up to 20 mm and grip force of 600 N, while EZN 64 offers 12 mm stroke and grip force of 500 N. Supplied with 24 Vdc, external controller includes digital input and...
Read More »![Parallel Gripper is sealed to IP 67.](https://cfnewsads.thomasnet.com/images/medium/455/455565.jpg)
Parallel Gripper is sealed to IP 67.
Pneumatic, 2-finger DPGplus is available in 7 sizes, ranging in moment capacity from 22-118 lb-ft. Each size offers option of 2 strokes and spring, for additional grip force, or safety device for OD and ID gripping. Oval piston transfers actuation to jaws through wedge-hook system. Gripper includes mounting options for magnetic switches for monitoring open, closed, or part-present position....
Read More »![Viscometer measures low-viscosity products.](https://cfnewsads.thomasnet.com/images/medium/455/455564.jpg)
Viscometer measures low-viscosity products.
With FS torque range of 181,000-7,970 dyneocm, 1/23 CAP 1000+ offers choice of 750 and 900 rpm speeds or single custom speed suited for QC tests. Range lets users to perform shear rate tests on thinner coatings, polymers, resins, and other water-based products manufactured with no VOCs. Unit tests sample volumes of less than 1 mL and features temperature control from 5-75Ã-
Read More »