Evotec AG

Schnackenburgallee 114
Hamburg 22525 DEU

Plasma Cutting System has lightweight, portable design.

Weighing 44 lb, FP-20A incorporates inverter power supply that links unit to primary voltage from 115-230 V, single-phase, 50 or 60 Hz. Unit comes equipped with SL60(TM) 1TorchÃ-®, which features trigger release and ergonomic handle. Able to cut through rusted, painted, or coated surfaces without prior surface preparation, product delivers clean cuts on various metals and provides genuine cut...

Computer Hardware & Peripherals

Tool System provides secure storage for specialty tools.

Remstar Light SentinelÃ-® offers secure, monitored access to up to 360 individual tools and items used in warehousing operations. To access system, operators enter or scan employee ID number. Vertically rotating shelves move up and down along tracking guide, delivering stored items to operator. Adjustable divider enables carrier compartments to be configured from 6 x 16 x 4 in. to 86 x 16 x 9...

Fluid & Gas Flow Equipment

Turbo Pumps handle heavy particulate loads.

Turbo Pumps feature combination of pumping speeds from 1,200-2,100 l/s and throughput up to 2 slpm. Rotor/bearing design ensures MTBF better than 200,000 hours. Suited for harsh duty applications, pumps are designed to operate safely even after sudden stops. All utilize integrated controller with interchangeable peripherals and cables, and are available with IP54-rated integrated power supplies...

Mining, Oil Drilling, Refining Products & Equipment

ElectrolyticTilt Sensor provides linear output.

Single Axis Linear Output Electrolytic Tilt Sensor features Ã-

Electronic Components & Devices

Filtration System filters process fluid within tank.

In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and...

Electronic Components & Devices

Roll Splitters eliminate manual roll removal.

Model 30 and Model 72 automatically remove defective and/or out-of-spec plastic stretch film, paper, foil, and paper waste from cardboard cores in as little as 8 sec. Designed to replace manual methods for roll removal, machines feature safety gate and mandrel that must be closed and secured to permit operation as well as see-through safety cage. Model 30 and Model 72 handle max roll diameters of...

Machinery & Machining Tools

CNC Lathe combines turning and machining.

With 124.02 x 64.96 in. footprint and 20 in. swing, Model M 20 offers rapid traverse rates of 394 ipm on X-axis and 295 ipm on Z-axis. Belt-driven, cartridge-style, gearless headstock has 15 hp AC GE Fanuc P-type spindle motor with variable speed drive, permitting full horsepower at spindle speeds as low as 275 rpm. Featuring 10.4 in. color LCD, GE Fanuc 21i-T control offers machining cycles for...

Material Handling & Storage

Conveyor delivers speeds from 60-300 fpm.

Model RLC-25 belt-driven live roller conveyor suits accumulation and transportation applications where live roller curves, spurs, and short sections of conveyor can be slave-driven from company's NBA(TM)23 or CRUZ(TM)belt. Segmented V-belt provides maximum drive while minimizing noise, and zero-pressure curves provide product accumulation.

Thermal & Heating Equipment

Electric Cabinet Oven heats to 350-

With workspace dimensions of 35 x 31 x 42 in., portable No. 947 uses 750 cfm, -¾ hp recirculating blower to produce horizontal airflow across load, which is heated by 9.6 kW installed in Nichrome wire heating elements. Oven features 4 in. thick insulated walls, stainless steel exterior, Type 430 stainless steel interior, and top-mounted heat chamber. Dual, independently operating doors provide...

Chemicals & Gases

Circuit Breaker exceeds mil spec life-cycle requirements.

Suited for military and aerospace applications, single-pole, remote-controlled Model RCCB 4930 is temperature-compensated and available in various current ratings from 5-100 A, AC 115 V/400 Hz and 28 Vdc. Unit exceeds MIL-PRF-83383 life-cycle specification of 50,000 actuations for inductive and resistive loads. Signal and control circuit is actuated by bi-stable liner motor, controlled through...