Gemalto
92447 FRA
Share:
Punch automates filter-cutting process.
Frit punch/place machine presses 8 sharpened SST tubes into precut sheet of filter paper to cut frits and pick them up inside tubes. It positions first row of microtiter tray under tubes and places frits into bottom of each well using ejection pins. Machine keeps track of where each set of holes is punched from filter sheet and indexes over one pitch to always get clean set of frits. After 12...
Read More »
Workstations provide dust and particle-free work areas.
Available in lengths of 49.5 to 97.5 in., AirClean(TM) workstations have worksurface depths of 24, 30, or 36 in. They are made of cold rolled steel and finished in electrostatically-applied powder coat paint. Offered in vertical- and horizontal-flow versions, workstations offer 90 fpm air velocity, HEPA filters, and pre-filters. Magnehelic gauges monitor static air pressure. Fans are centrifugal,...
Read More »
Hydraulic Pump provides portable power.
Pow'r-Buddy(TM) 10 Series 10,000 psi power pump features 115 Vac Universal motor capable of operating on as low as 60 V, yet powerful enough to start under full load. Two-speed operation makes pump suitable for use with small to medium size hydraulic cylinders and tools. Integrated pendant with 10 ft cord is standard. Variety of configurations are available including dump, 2 and 4 way manual...
Read More »
Coil Winder has machine vision.
Double Vision device winds fine filaments around spinning mandrel to produce micro coils, stents and catheters. It has menu-selectable variables, digital readout of parameter set points and values, and closed-loop tension and slack control. It provides wind speeds up to 6,000 mandrel rpm. Maintaining steady tension of 0.2 g and wind angle of 0.1 deg make it possible to produce coil with 0.0004...
Read More »
Extrusion Puller resizes and cuts.
Machine resizes plastic coated, braided tubing with heated die, checks for exposed wires, and cuts sections to any length. Hot die is located between two independent pinch drives. Each pinch drive is electronically geared to programmed speed or input from upstream size feedback. It has alphanumeric color touch screen for menu-selectable die heat, cut length and relative speeds for each pinch...
Read More »
Trash Cans fight germs.
Classics(TM) outdoor receptacles are made of heavy gauge, hot dipped galvanized steel with round perforated pattern. Standard models are available in 51 and 25 gal capacities and are powder-coated in Uni-Koat(R) textured black. Custom colors are available and center band can be laser cut to display team or corporate logo. All models have funnel top, Germ-Fighter(TM) rigid plastic liner, and leg...
Read More »
Radio Modem fits on DIN Rail.
No license is required to use SS-900 frequency hopping 900 MHz radio with 1 W RF output. For use on ISM band, it is capable of being programmed as Host, Remote, or Repeater/Remote. Modem can pass data transparently, as well as in MODBUS and Allen-Bradley protocols. Suitable for industrial and SCADA operations, it works from input voltage of 9 to 28 Vdc, has RS232 port, and connects to PLCs and...
Read More »
Fluorescent Lights provide indirect clear white light.
Partition-mounted LCD201 Luminaires use T8 and T5 fluorescent lamps and 1 3/4 to 4 in. adjustable mounting brackets. They are suitable for open office spaces with panel systems, stacking systems, or free-standing modular furniture. Units come in with 2 lamps and in 2 or 4 ft lengths to match segmented or monolithic walls. Hard wired power connections for area switch control, or power cord and...
Read More »Crimping Tool handles big terminals.
Lightweight Sta-Kon ERG-2008 Comfort Crimps tool is UL-listed for handling tubular, non-insulated Sta-Kon terminals ranging from 8 through 1/0 AWG. It does same job as company's heavier, bulkier tools but with shorter, ergonomic frame; less required force; and comfortable, rubberized thermoplastic handles. Rotating crimp die nest marked for each specific wire size and Shure-Stake(TM) mechanism in...
Read More »Restraint keeps trailer at dock.
TRUK STOP STAR 4 effectively prevents premature trailer departure, trailer creep, and trailer landing gear collapse. Hydraulic powered device has restraining force of 30,000 lb and can hook and hold any style ICC bar. Its sensor bar communicates to control panel actual hook contact with ICC bar. Restraint is compatible with new federal regulations and with any design dock leveler equipment.
Read More »