VeriFone Holdings, Inc.
Paris 75010 FRA
Share:
![Hybrid Welding System combines laser with GMAW.](https://cfnewsads.thomasnet.com/images/medium/493/493119.jpg)
Hybrid Welding System combines laser with GMAW.
Hybrid Laser Arc Welding combines deep weld penetration and low heat input of laser welding with power efficiency and gap tolerance of GMAW (gas metal arc welding). Adding GMAW in tandem with laser and filler metal creates wider weld bead and enhances metallurgical stability. Mechanized system utilizes laser only, laser with cold wire fill, or hybrid laser arc welding in 2D gantry, 3D robotic, or...
Read More »![Amplifiers incorporate background-lit LCDs.](https://cfnewsads.thomasnet.com/images/medium/493/493133.jpg)
Amplifiers incorporate background-lit LCDs.
Along with auto-detect mode, Millimar C1208 and 1216 feature displays with analog and 2-line digital readout. Status lamps indicate warning and tolerance limits, and 2 features can be displayed simultaneously. Millimar C1216 also has analog output with programmable output voltage and resolution from 1 Ã-µin. with measuring range of Ã-
Read More »![Optical Measurement System uses image analysis algorithms.](https://cfnewsads.thomasnet.com/images/medium/493/493143.jpg)
Optical Measurement System uses image analysis algorithms.
Based on sound metrology principles, Innova provides point-to-point and field-of-view non-contact measurements of semiconductor, optoelectronic, and MEMS devices. It delivers FOV measurement down to 0.5 Ã-µm with measurement accuracy of 0.010 Ã-µm. Providing 200 x 200 mm XY stage travel, system has granite structural components and vibration isolation support stand for stability....
Read More »Software monitors overall equipment effectiveness.
Web-based Proficy(TM) Machine Tool Efficiency v4.0 digitizes information being generated throughout factories into virtual plant that can be accessed where, when, and how it is needed. It provides actionable analysis by collecting root cause data from machine tools and other assets, and includes remote diagnostic tools to maximize MTBF and minimize MTTR. Real-time information portal integrates...
Read More »![Stationary Tool Storage Rack stores up to 500 HMC tools.](https://cfnewsads.thomasnet.com/images/medium/493/493221.jpg)
Stationary Tool Storage Rack stores up to 500 HMC tools.
Matrix Tool Magazine allows Toyoda HMCs to be tooled for more part numbers, keeps back up tools on hand, and eliminates trips to tool room. Along with PC-based software, product comes with tool identification and monitoring capabilities as well as OP Supporter software. Its 4-position revolving disk keeps next tool ready and waiting for machine's tool-changer arm. Magazine handles tools up to...
Read More »![Heavy-Duty VMC machines ferrous materials.](https://cfnewsads.thomasnet.com/images/medium/493/493223.jpg)
Heavy-Duty VMC machines ferrous materials.
Equipped with 6,000-8,000 rpm geared headstock, BM Series VMC (Vertical Machining Center) is designed for use in heavy-duty applications involving ferrous materials such as cast iron and steel. Model BM-1200 features iron base paired with 4 Y-axis box guideways to eliminate saddle overhang. Several high-torque and direct-drive spindle configurations are available in CAT 40 or CAT 50 tapers.
Read More »![Vertical Machining Center suits high-speed applications.](https://cfnewsads.thomasnet.com/images/medium/493/493224.jpg)
Vertical Machining Center suits high-speed applications.
AF Series linear guideway machines feature rigid cast iron base and column that promote long-term accuracy and durability. Direct-drive, 12,000 rpm, temperature-controlled spindle is paired with Fanuc 18i-MB control to meet demands of complex die/mold applications.
Read More »![Cylindrical Grinder turns/grinds shafts in single clamping.](https://cfnewsads.thomasnet.com/images/medium/493/493228.jpg)
Cylindrical Grinder turns/grinds shafts in single clamping.
Featuring Studer GranitanÃ-® S103 mineral inclined-bed machine base and integrated chip conveyor, Kairos S is designed for hard turning and grinding of rotational hard/fine applications for shaft and chucked workpieces. Modular design facilitates setup and changeover, while Fanuc 310i-A digital control offers step-by-step programming. Depending upon application, parts up to 1,000 mm can be...
Read More »![CNC Profile Grinder utilizes 2,600 rpm spindle.](https://cfnewsads.thomasnet.com/images/medium/493/493229.jpg)
CNC Profile Grinder utilizes 2,600 rpm spindle.
Equipped with dynamic linear drives for linear and rotary axes, Prokos provides workpiece dimensions of 300 x 300 x 300 mm with XYZ-axis feed rates of 120,000, 10,000, and 50,000 mm/min, respectively. Speed stroke grinding keeps heat out of part, allowing grinding of titanium. Machine features 12,000 rpm variable speed motor and GE Fanuc 18i control with color flat screen, menu bars, softkeys,...
Read More »![Capacitive Level Switch measures powder, bulk, or liquid.](https://cfnewsads.thomasnet.com/images/medium/493/493105.jpg)
Capacitive Level Switch measures powder, bulk, or liquid.
Insensitive to material buildup, CLS2 employs solid-state sensing technology, which uses impulse RF admittance measurement combined with active guard. Product is designed to auto-calibrate in application and features universal power supply that works from 12-240 Vac/dc. Also offered in weatherproof model, features include failsafe setting, status indicators, and programmable output time delay....
Read More »