Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Apr 12, 2013 Helping to extend life of robotic MIG guns and consumables to increase productivity, TOUGH GUN™ Reamer TT3 Series features sprayer reservoir located as to safeguard against overfilling and leakage onto internal electronics. Plug and play internal replacement parts feature smart-keyed connections to facilitate assembly and accelerate in-cell troubleshooting, while centralized terminal strip simplifies internal wiring. TOUGH GUN Anti-Spatter Sprayer also comes standard.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Mar 04, 2013 Radius™ Welding Brushes clean base material before welding and between each pass. Featuring steel-wire bristles, brushes for stainless steel include toothbrush-style 3 x 7 row brush, 2 x 9 row brush with slightly curved handle, and 3 x 19 row brush. For aluminum, toothbrush-style 3 x 7 row brush and 2 x 9 row brush with slightly curved handle have brass-wire bristles. With tempered-steel bristles, brushes for carbon steel include 3 x 19 row brush and 4 x 16 row brush with curved handle.

MAXAL International, Inc    Traverse City, MI 49686
Dec 18, 2012 Registered by Aluminum Association and classified by AWS for wrought commercial applications, MAXAL 4943 offers corrosion resistance and low hot cracking sensitivity. Product does not depend upon dilution from base metal during welding to increase strength of weld deposit. Available in diameters ranging from .030–1/16 in., MAXAL 4943 MIG wire offers precisely controlled wire diameter, cast, and helix. TIG cut-lengths are available in 1/16, 3/32, 1/8, 5/32, and 3/16 in. dia.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Dec 12, 2012 Featuring modular construction, Gold Series® has reinforced door with double-thick hinges, and single flat inside panel to create smooth, air-tight gasketed seal. Fans are equipped with damper actuator handle that allows user to see from ground level whether damper is open or closed. Inside collector, gaskets have been moved to edges of pan so that no dust builds up on vertically mounted filters. Additional features include touchscreen controls, spark diverter inlet, and diaphragm silencer.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Dec 05, 2012 Designed for guns equipped with QUICK LOAD™ Liners, QUICK LOAD™ Liner AutoLength™ System minimizes wire-feeding problems and burnbacks, as well as premature contact tip failure and wear associated with misalignment between liner and contact tip. Spring-loaded module housed inside power pin applies constant pressure on liner, keeping it seated properly in retaining head or diffuser at all times. Allowing for up to 1 in. forgiveness, system accommodates liner movement during welding.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Nov 26, 2012 Supplied in portable package, VRTEX® Mobile delivers hands-on, entry-level training solution that is consistent with industry methodology and evaluation criteria. With universal gun handle design, system offers pre-installed basic GMAW (MIG) package and optional SMAW stick add-on package, providing training for flat plate, 2F/3F joints, and 1G, 2G, and 3G grooves. VRTEX® Mobile measures and records students’ training results in real-time to help identify welding deficiencies and strengths.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 30, 2012 Available in sized packages ranging from medium to 2XL, Premium Welding Gear Ready-Pak® contains top-grade personal protection equipment for welding and other fabrication tasks. Each kit includes VIKING™ 3350 Series variable shade 6–13 black helmet, Shadow™ split leather sleeved jacket, leather MIG/Stick welding gloves, and leather SteelWorker® gloves as well as Finish Line™ clear safety glasses, split leather flame-resistant welding sleeves, flame resistant doo-rag, and industrial duffle bag.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Oct 25, 2012 Jessi Combs welding apparel, designed with input from celebrity welder of same name, features products tailored to and sized specifically for women. Specific products include Jessi Combs VIKING™ 1840 Series Amp Angel™ Auto-Darkening Welding Helmet with 90 x 110 mm cartridge and external continuous 9–13 shade control, Jessi Combs Women’s Shadow™ Welding Jacket, MIG/STICK Welding Gloves with Kevlar® stitching, and Jessi Combs Women’s Steelworker® Gloves with goat skin back.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Sep 21, 2012 Designed for use with aluminum wire and other soft alloys where wire feeding consistency is critical, XR™-Pistol-Pro Gun employs motor and drive that promote feedability and arc consistency over extended distances. This push-pull gun, rated at 100% duty cycle at 200 A with air-cooled torch and 400 A with water-cooled torch, features aluminum-specific tension settings for 4000 and 5000 series aluminum wires. Over 20 head tube options are available.

Henkel Corporation    Rocky Hill, CT 06067
Aug 28, 2012 Designed for use on manual and automatic MIG/MAG welding, laser/plasma cutting, and spot welding equipment, Loctite® SF7900(TM) Ceramic Shield prevents spatter adhesion for up to 8 hr with one application. Silicone-free coating dries in seconds, allowing continuous, uninterrupted welding throughout shift. By protecting shroud from spatter and allowing uninterrupted gas flow, coating helps optimize quality of weld seam. No chemical cleaners are required as weld spatter can be swept up with brush.

Matheson    Montgomeryville, PA 18936
Aug 16, 2012 In addition to built-in magnifying lens holder, MATHESON Select® Limited Edition No. 2 Custom Welding Helmet comes with protective inside and outside cover lenses. Light-duty version has auto-darkening variable shade, auto-darkening fixed shade, and passive shade options. Controlled by 2 independent arc sensors, auto-darkening shades feature digital technology. All-duty model has heavy-duty helmet structure and additional shade features.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jul 09, 2012 Arc Armor® Digital Elite(TM), Digital Performance(TM), and Digital Pro-Hobby(TM) Series auto-darkening welding helmets are available with digital controls that facilitate shade, delay, and sensitivity adjustment for welder, even when wearing gloves. Promoting comfort and accommodating personal preferences, headgear conforms to wearer's head and offers 6 points of adjustment. Integrated comfort cushion on back of headgear further promotes secure fit.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
May 25, 2012 Intended for heavy-use and high-amperage (300+ A) applications, Arc Armor® Titanium Series(TM) helmets feature InfoTrack(TM) technology that lets operator track arc-on time and provides digital clock with ability to set alarms and timers. Headgear is comfortable and adjustable and has been tested to withstand extreme use. Digital controls with large display and intuitive design allow welder to adjust modes, shade levels, delay and sensitivity.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Dec 15, 2011 Available in 5 models, FILTAIR Industrial Centralized Weld Fume Extraction Series is customizable to variety of welding cells and applications. Units combine TruLock(TM) Filter technology with MERV 15 nanofiber filter pack to capture up to 95% of particles ranging from 0.2 to 1 micron. TruLock technology uses surface webbing of small fibers to capture weld fumes on surface. To extend filter pack life, systems include online and offline Linear Jet Automatic Cleaning System.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Oct 04, 2011 With adjustable, locking handle and marked detents every 45° for accuracy, Pivoting Welding Angle lets welders set up and hold steel in angles from 22° to 270°. Magswitch® On/Off technology eliminates effects of magnetic field during setup while also promoting placement precision and non-marring hold on workpiece. Tool offers work holding capability on 3 sides of each magnet, with 200 lb holding value, and accommodates flat or round steel.

Hypertherm, Inc.    Hanover, NH 03755 0010
Aug 10, 2011 Intended for those who use Kjellberg Fine Focus 800 Plus system or HiFocus 280i/360i/440i systems and cut mild steel using either PB-S80 or PerCut 370.2 torch, Centricut consumables are engineered for optimal longevity, cut quality, and process reliability. Properties allow users to maintain cutting speeds required for their applications, and mild steel consumables are precision manufactured to tight tolerances so that cutting systems produce consistent, reliable performance.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Jul 26, 2011 Fostering inventory reduction, TOUGH LOCK(TM) Conversion Series lets companies use TOUGH LOCK Consumable System on Binzel, Lincoln Electric, Bernard, and Tweco-style MIG guns by stocking as few as 2 Tregaskiss parts. TOUGH LOCK Consumable System is composed of TOUGH LOCK Contact Tips and Retaining Heads featuring Tregaskiss Dual Taper Technology. Consumable system's locking feature, dual-lead thread design, and Dual Taper Technology fosters extended, optimized operations.

Kimberly-Clark Professional    Roswell, GA 30076
Apr 19, 2011 Able to adapt to changing welding environments, Jackson Safety W60 TrueSight features optimized visibility and separate buttons that can be operated even with gloved hand to control grind, torch, and weld modes. Other features include built-in magnifying lens holder; adjustable settings for shade, sensitivity, and delay; as well as automatic on/off functionality. While 4 sensors reduce blockage possibility during welds, solar panel extends life of 2 AAA batteries that power unit.

Astro Arc Polysoude    Valencia, CA 91355
Jan 26, 2011 Automatic TS 8/75 tube/tubesheet welding heads have ergonomic double grip with control buttons for clamping and welding. They have pneumatically operated clamping/centring system that lets user work with several welding heads simultaneously as well as adjustable support legs. Integrated rotating wire feed ensures feed velocity and impact position for filler wire are constant, while closed cooling water circuit maximizes service life.

Arc-Zone.com, Inc.    Carlsbad, CA 92009-1551
Oct 05, 2010 Plasma Arc Welding Accessory Kits include components such as replacement shield cups, back caps, pre-ground electrodes, shield cup gaskets, and long tips. Available in standard or deluxe versions, products are labeled with custom-made lid card that identifies each component for easy access. Kits are assembled in ruggeded box and they also includes a guide for optimizing plasma arc welding torches.