Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Aug 10, 2006 Suited for thin-gauge aluminum, stainless steel, and steel applications, Millermatic® 350 and 350P inverter power sources integrate Centerfire(TM) consumables and Bernard® 15 ft Q300 MIG guns. Both models offer 208/230/460 or 460/575 V single- and 3-phase input power; 60% duty-cycle rating at 300 A/32 V; 25-400 A output; and LVC(TM) (Line Voltage Compensation). Pulsed MIG welding capabilities of 350P model help reduce weld spatter.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Aug 08, 2006 Shopmate(TM) Models 300 and 300 DX welding power sources feature range of 5-400 A (250 A at 60% duty cycle) and operate under single-phase power (208/230 Vac or 230/460/575 Vac). Model 300 DX operates in CV (MIG, FCAW) and CC mode (DC TIG and Stick), and includes process selector switch. While 300 model is CV-only, both models offer inductance arc control for MIG welding. Welders include 10- or 14-pin connectors, and internal fan turns on only when needed.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jul 28, 2006 Available with 23 hp Kohler and 22 hp Robin engine options, gas-powered Bobcat(TM) and Trailblazer® provide multi-process welding with simultaneous generator and welding capabilities. Units can produce 10,500 W of Accu-Rated peak power for minimum of 30 seconds. Trailblazer models include Auto-Crater feature, which eliminates craters when using dc TIG process. Bobcat and Trailblazer diesel models include Low Fuel Shutdown, which shuts down engine before fuel is gone.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Mar 10, 2006 Powered by 4-cylinder, water-cooled, 1,800 rpm Perkins® diesel engine, Vantage® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to select lower open circuit voltage for added safety in CC-Stick welding mode.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 26, 2005 Multi-process, inverter-based Invertec® V450-PRO is suited for shops welding with 1/16 in. or larger diameter welding wire electrodes that also require power for arc gouging repair with 3/8 in. carbon. Capable of stick, Touch-Startâ„¢ TIG, MIG, cored wire welding, and arc gouging, product features controls that include selectable Hot Startâ„¢ and variable Arc Force functions. Unit delivers 5–570 A welding output, 88% efficiency rating, and 95% power factor rating.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Jul 25, 2005 Power Arcâ„¢ 5500 provides 5,500 W of surge ac generator power and 125 A of ac welding amperage. Welding capacity is delivered by Robin/Subaru® overhead cam engine, or Honda® overhead valve engine, both rated at 9 hp. Single-range output control lets user dial in correct weld settings, while built-in circuit breakers protect tools and unit from power overload. Enclosed in tube-frame roll cage, Power Arc can be carried by 2 people anywhere power or welding is needed.

Branson Ultrasonics Corp.
Danbury, CT 06813 1961
Apr 27, 2005 Connected directly to 2000 Series hand-held welding devices, 2000LP Ultrasonic System is configurable to run in automation and features digital LED read out and process controls. Visual, audible, and logic alarms provide continuous monitoring, while closed loop amplitude control ensures constant power and consistency in welding cycle. Available in 20, 30, and 40 kHz frequencies, product offers 5 levels of power supply protection and LPt or LPe control level.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Feb 08, 2005 Weighing 40 lb, CSTâ„¢ 280 Stick/TIG Welding Power Source provides output of 280 A/31 V at 35% duty cycle or 250 A/30 V at 60% duty cycle. Users can select between high and low voltage inputs to accommodate domestic and international requirements. If the arc start requires additional output amperage, Adaptive Hot Startâ„¢ automatically provides it, preventing electrode from sticking and creating inclusion. Remote amperage control is provided through 14-pin receptacle.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Feb 01, 2005 Power MIG® 255C features Diamond Core Technologyâ„¢ for minimal spatter. Spool gun ready capabilities include built-in electronics to drive Prince® XL or Magnum® SG spool gun for aluminum welding and second gas solenoid to facilitate spool gun connection. Offering continuous control over amperage range of 30-300 A, rated output is 250 A @ 40% duty cycle. Unit has 115 V auxiliary receptacle as well as cast aluminum industrial wire drive system.

Orbimatic GmbH
Peterborough PE7 3FT  United Kingdom
Nov 17, 2004 Compact, water-cooled ORBIMAT 165C can be used to control welding heads that are capable of cutting 3–275 mm OD tubes, pipes, and fittings. Full package, consisting of controller, power supply, and cooling unit, weighs 24 kg with full coolant level. Inverter technology throughout machine enables it to work with any input voltage from 80–260 Vdc, while Compact Flash port on front panel allows welding data to be stored or transferred.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Nov 11, 2004 Able to connect to 115 and 230 V power receptacles, Millermatic® DVI (Dual Voltage Input) MIG welding power source has 30–175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual groove quick change wire, and Argon mix regulator/flow gauge with hose.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Oct 15, 2004 Trailblazer® 302 provides 30–300 A dc output and 35–225 A ac output, while Trailblazer® 275 offers 30–275 A dc output. Engine-driven units include 4 preset DIG settings, adaptive hot start, and lift-arc/scratch start TIG with auto-stop. They deliver 10,000 W of useable peak power for minimum of 30 seconds, suitable for plasma cutting and running MIG welder. A 12 gal fuel tank allows 20 hr of operation on job using 1/8 in. 7018 electrodes at 125 A with 20% duty cycle.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Sep 10, 2004 To prevent torch damage by monitoring coolant flow and temperature, Syncrowave® 250 DX and 350 LX incorporate Cool-On-Demandâ„¢ feature. Syncro-Startâ„¢ technology provides choice of 3 starting conditions to optimize starts to match tungsten diameter and material thickness. Power sources, with welding ranges of 3–310 A and 3–400 A, also incorporate built-in consumables storage drawer, cable hangers and tilted operator interface with dual digital meters.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 12, 2004 Classic® 300 D is available with Kubota V2203M, a 4-cylinder, water-cooled, diesel engine that produces 32.5 hp @ 1,800 rpm and has 15 gal fuel capacity. Generator incorporates all copper windings and Custom Arcâ„¢ high-idle RPM/OCV adjustment controls. Suited for pipe and general-purpose welding, unit offers 300 Adc at 60% duty cycle, has 5 current ranges, and generates 3,000 W of ac auxiliary power from 115 or 230 V duplex receptacles.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 03, 2004 Rangerâ„¢ GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects Kohler® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and flux-cored welding as well as arc gouging with up to 3/16 in. carbons.

Orbimatic GmbH
Peterborough PE7 3FT  United Kingdom
Jul 16, 2004 Rated at 160 A, ORBIMAT 160CR features anodized aluminum panels, which eliminate risk of shedding from painted panels, keeping contamination to minimum. It includes automatic welding parameter generation facility and is capable of holding 2,000 four-level welding procedures. Each procedure incorporates Application Specification section that allows for storage of details of gas types and flow rates, tungsten electrode geometry, and material specifications.

Orbimatic GmbH
Peterborough PE7 3FT  United Kingdom
Jun 18, 2004 Orbimat 300 AC welds with either ac or dc, allowing orbital technique to be used for welding aluminum parts. Since ac balance and frequency can be controlled, operator can manipulate weld bead profile to suit application. Power supply works with any weld head from Orbimatic range, providing capabilities from 1.66 mm to 10 in. OD.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jun 01, 2004 Software-driven, Axcess™ 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10–44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190–630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through internal digital-to-analog converter, gaining functions such as Auto-CAL™ and Auto-Thread™.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Jun 01, 2004 Multi-process Power Wave® 355M power source, with Power Feedâ„¢ 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5–425 A. Unit comes factory programmed with 60+ Waveform Control Technologyâ„¢ welding programs.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Apr 06, 2004 Weighing 80 lb, XMT® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Lineâ„¢ primary power management technology, 5–425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance control, Wind Tunnel Technologyâ„¢, and Fan-on-Demandâ„¢.