Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Jul 15, 2009 Designed for MIG and pulsed MIG aluminum applications, AlumaFeed Synergic System consists of AlumaPower 350 MPa synergic power supply providing 5-425 A/10-38 V, XR AlumaFeed wire feeder/control module, and XR-Aluma-Pro or XR-Pistol Grip gun. Profile Pulse(TM) pulsed MIG output creates stacked dime weld bead appearance without torch manipulation, while Hot Start(TM) function minimizes incomplete fusion or cold lap at beginning of weld.

Northwest RF Corp.
Bensenville, IL 60106
Jun 25, 2009 Designed for welding thermoplastics such as PVC, EVA, PU, PETG, and polyolefins, Weldpro 4.0 Welder/Sealer offers infinitely adjustable power output from 0-4 kW that can be set in 4 independently adjusted stages for both power and duration. Modular system includes auto-tuning feature and arc suppression as standard. Typical applications include sealing clamshell/blister packages, tubing and perimeter tear-seals for medical bags, seam seals, and joining rolls of material.

Master Appliance Corp.
Racine, WI 53403
May 28, 2009 Model MT-30 Table-Top Microtorch is self-igniting, produces continuous hands-free adjustable flame up to 2,500°F, has built-in refillable, metal fuel tank and runs approximately one hr on full charge. Ignition system meets Consumer Products Safety Commission safety requirements, including slide lock safety feature that prevents accidental ignition. Its 3 in. dia circular base is stable and can be moved to any location or stored in small space.

Servo-Robot Corp.
Bruno, QC J3V6E1
May 19, 2009 Based on intelligent 3D image processing, AUTOTRAC/WT provides non-contact seam tracking and adaptive submerged arc welding of wind turbine tower tubes. Miniaturization of all electronics minimizes footprint while optimizing power and digital convergence. System has no moving parts, yet digital technology is not affected by reflective surface conditions that can fool other artificial vision techniques.

Magnatech Limited Partnership
East Granby, CT 06026
May 11, 2009 Used for multipass orbital pipe and boiler tube welding, Pipemaster has 220-480 Vac autoranging input and 200 A output. It will operate weld head models with controls for torch rotation, wire feed, torch oscillation, and arc voltage control functions. Autoprogramming lets users enter pipe OD, wall thickness, and material to spur automatic generation of weld program. If not perfect, weld program can be modified using Edit or Scaling modes. Power source stores up to 100 weld programs.

Herrmann Ultrasonics, Inc.
Bartlett, IL 60103
May 08, 2009 Available in models that generate 1,200-6,000 W, HiQ evolution features freely programmable effective stroke and High Motion Control pneumatic module, which precisely regulates pneumatic pressure. Automatic start activation optimizes quantity output, while Tool Change System with quick release fastener allows indexed tool change of preset Sonotrode-stacks without adjustment. As self-contained unit, HiQ evolution protects working area with safety light curtain.

Thermal Arc
Troy, OH 45373
Apr 14, 2009 Shipped ready for operation, Thermal Arc 95S weighs 10 lb and can produce up to 95 A of power. Stick Package includes Tweco® Weldskill® style electrode holder with 10 ft lead, Tweco Weldskill style ground clamp with 10 ft lead, and 20 A adapter plug and cable. Furthermore, Stick/TIG Package adds TIG torch 17 V style 10 ft with accessories as well as argon regulator/flow gauge. Both packages also come with 4 general-purpose stick electrodes and quick set-up DVD.

Tregaskiss, Ltd.
Oldcastle, ON N0R1L0  Canada
Apr 13, 2009 Featuring curved-handle, TOUGH GUN(TM) products are available with QUICK LOAD(TM) Gooseneck System to accelerate and facilitate changing of gooseneck combination for welding operators. This minimizes unnecessary downtime and provides exact angle for specific welding applications. System accommodates various gooseneck lengths and styles and also allows gooseneck to be rotated 360° to reach awkward joints or weld in confined areas.

Alltec Corporation
Canton, NC 28716
Apr 08, 2009 TerraWeld® Exothermic Welding System is suited for making copper-to-copper and copper-to-steel electrical connections. Clamp-on graphite mold safely positions and maintains any weld required, and exothermic reaction creates temperatures above 2,500°F, producing molten metal that flows into weld cavity and fills available space. Portable unit features hermetically sealed metalized TerraWeld® pouch, optimizing system lifespan. It is UL listed and recommended by IEEE and IEC.

Magnatech Limited Partnership
East Granby, CT 06026
Mar 30, 2009 Tubemaster 514B can operate analog heads, using tachometer motors, and digital encoder motors. This allows operation of weld heads from other manufacturers, with drop-down model selection and autoprogramming. Also, on-screen calibration of competitor Heads eliminates trim potentiometer adjustments. Software upgrades can be sent as email attachments or transferred using USB drive, and system also supports USB keyboard. Teach mode and total program deletion options are also standard.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Mar 19, 2009 Designed to meet jobsite reliability standards, multifunctional Trailblazer® 302 Air Pak(TM) is gasoline engine-driven welder, generator, and air compressor. This self-contained power source welds at up to 350 A and provides 13,000 W of Accu-Rated(TM) generator power as well as 26 cfm at 100% duty cycle. Rotary screw air compressor delivers 70-160 psi of air, with no storage tank required, while 30 hp Kohler gas engine weighs 771 lb and measures 59½ x 20 x 34¼ in.

Sonobond Ultrasonics
West Chester, PA 19380
Mar 11, 2009 Able to accommodate tinned or heavily oxidized wires, Dual Head SpliceRite(TM) welds wire bundles that have cross-sectional areas of up to 100 mm². It comes with 3,500 W power supply and utilizes Wedge-Reed system, which directs high frequency ultrasonic energy via welding tips to wires to be welded. Welding heads on each side of weld area enables accelerated splicing of large wire bundles. Up to 250 jobs can be stored/recalled, and welds may be controlled by height, energy, or time.

ESAB Welding & Cutting Products
Florence, SC 29501
Mar 06, 2009 Offering capabilities for MIG, TIG, or Stick welding, MTS 3500i inverter power source supports wide selection of ferrous and nonferrous alloys in MIG mode utilizing fixed slope and inductance controls. Digital preset of voltage/amperage on all process is accessible on front panel, while switch on back panel provides selection of primary voltage. Unit features adjustable arc force, Touch Lift TIG(TM) Start capability, and Auto Fan(TM) which automatically turns fan motor on/off as needed.

Tweco Products, Inc.
Wichita, KS 67209
Mar 04, 2009 Ergonomically designed for comfort during use, Spray Master(TM) features duty cycle of 80% with Argon mixed gases and rotatable conductor tube with articulating head that helps lock gun angle for certain positions. Extended trigger life, with its blade-style design, creates electrical contact by sliding over each other in self-cleaning action to avoid arcing and bonding of contact surfaces. Gun can also accommodate Knucklehead(TM) flexible conductor tube.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Mar 03, 2009 Millermatic 212 Auto-Set incorporates one feature that automatically sets proper speed and voltage after user inputs metal thickness and wire diameter. Along with infinite voltage control for manual fine-tuning of voltage and wire feed speed, welder offers Line Voltage Compensation for maintaining welding output in event of ±10% variations in primary power. Other features, aside from 160 A @ 60% duty cycle rating, include Fan-On-Demand cooling system and angled dual-gear drive system.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Mar 03, 2009 Designed as dc stick welder and ac power generator, Outback® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off truck beds. Unit's high-capacity ac generator provides 5,700 W of peak and 5,200 W of continuous power.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Mar 03, 2009 Offered in compact case, Vantage 500 Perkins® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9 hr of welding at 500 A/40 V/100% duty cycle output, or 33 hr at high idle.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Mar 03, 2009 With digital meters for monitoring as well as MIG-STT® capabilities, dual power LN(TM)-25 PRO can be powered by either control cable or across arc cable, which allows operator to adjust voltage and wire feed speed remotely. It features heavy-duty spindle design with adjustable brake, and MAXTRAC® Wire Drive system with tool-less wire guides that eliminate birdnesting and set-up variability with no need for adjustment. Replacement cases are available in aluminum and polycarbonate.

Tregaskiss, Ltd.
Oldcastle, ON N0R1L0  Canada
Mar 02, 2009 Built-to-order, semi-automatic TOUGH GUN(TM) MIG Guns come in air- and water-cooled models with respective capacities of 350-650 A and 400-600 A. While air-cooled versions include aircraft-grade aluminum armored gooseneck, water-cooled guns feature stainless steel gooseneck. Both types integrate cable strain relief on both ends, TOUGH LOCK(TM) Contact Tips for extended wear life, and QUICK LOAD(TM) Liner system for accelerated liner replacement.

techMatrix, LLC
Eden Prairie, MN 55346
Feb 24, 2009 Integrating pulsed temperature controller with PID feedback, HBR50 suits thermo-compression applications like hot bar reflow soldering flex circuits, ribbon cable and wires; heat seal bonding connectors; or attaching ACF connectors to printed circuit boards. It can also heat stake metal contacts to plastic, and can be configured with any combination of X, Y, Z, or theta stages to meet specific needs. Machine is controlled with WeldWorks(TM) Software Suite.