AC/DC Welder offers 250 A output.

AC/DC Welder offers 250 A output.

Ranger(TM) GXT provides AC/DC welder mated with AC auxiliary power generator that offers 11,000 W peak and 10,000 W continuous power. Unit includes remote control receptacle, full-KVA 120/240 V outlet, and four 120 V outlets. Fully enclosed case protects KohlerÂ-® 20 HP OHV gasoline engine, and operators can simultaneously weld and use AC generator power. It handles Stick, TIG, MIG, and...

Read More »
Power Sources provide pulsed MIG welding.

Power Sources provide pulsed MIG welding.

MillermaticÂ-® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units...

Read More »
Spot Welder uses middle-frequency inverter technology.

Spot Welder uses middle-frequency inverter technology.

Middle Frequency Inverter Spot Welder is available in Projection or Spot Weld models from 32-240 KVA, rated at 50% duty cycle with max welding currents to 88,000 A secondary. Middle Frequency (1,000 Hz) Inverter technology employs weld times measured in milliseconds to deliver continuous, constant weld current, resulting in homogeneous development of weld nugget and cosmetic appearance of weld....

Read More »
Laser Packages cut and weld machine tools.

Laser Packages cut and weld machine tools.

Models C5000-E and C6000-E are carbon dioxide laser sources offering 5 kW and 6 kW power. Laser source, CNC, and servomotors are integrated and interfaced as complete system. Laser communicates with CNC via optical bus, and all laser control and diagnostics are integrated into CNC. Historical data for maintenance purposes is logged and can be accessed via CNC screen. Both laser packages can...

Read More »

Welding System uses digital communication protocol.

Multi-process Power Wave-® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink-® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...

Read More »

Welder delivers 10,000 peak watts.

Eagle(TM) 10,000 provides stick welding, basic DC TIG welding, and auxiliary power. Operators can simultaneously weld and use AC generator power for lights, tools, and emergency standby power. Rated 210 A/25 Vdc, unit is equipped with 2-cylinder, 4-cycle, 20 hp, OHV air-cooled Kohler gasoline engine. Welder includes 20 ft No. 2 electrode cable, electrode holder, 15 ft No. 2 work cable, and work...

Read More »
Multi-MIG Welding Inverters monitor arc conditions.

Multi-MIG Welding Inverters monitor arc conditions.

Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...

Read More »
AC/DC TIG Welder delivers 200 A of welding power.

AC/DC TIG Welder delivers 200 A of welding power.

Pulling 25 A of power, Invertig 201 AC/DC TIG Welder allows users to vary AC frequency from 20-200 Hz while maintaining square wave throughout complete range for control over arc. Pulsing, with frequency from 0.4-300 Hz, is standard, and balance is adjustable from 10-90%. Unit weighs 65 lb and fits in cabinet measuring 20 x 9Â-½ x 19Â-¾ in. It comes with 25 ft SR-17 air-cooled TIG torch,...

Read More »
Welding System incorporates multifunction control panel.

Welding System incorporates multifunction control panel.

Semi-automatic Power Feed(TM) 10M Dual includes dual welding wire electrode drives, allowing for 2 separate welding processes, electrode alloys, or wire diameters. Model MSP4 interface controls all weld parameters in single display. With 4 drive rolls and optional push-pull capability for aluminum welding, Power Feed 10M Dual is suited for exotic alloys and hard-to-weld materials. Infrared port...

Read More »

All Topics