Wisconsin Oven Corp.
East Troy, WI 53120
Oct 13, 2004 Adjustable from 1 min to 99 hr and 59 min, Watch Dog Oven Management System displays time-in and time-out, along with time remaining and present date and time. It keeps track of elapsed time from date of shipment and accumulates time when oven is in operation. LCD indicates service intervals at 500 hr increments, prompting maintenance personnel to perform recommended service. Unit will dial up to 3 stored telephone or pager numbers to notify of malfunction.

Wisconsin Oven Corp.
East Troy, WI 53120
Oct 13, 2004 Natural gas fired, heavy duty walk-in oven, Model SWH-8218-G, features clear work chamber of 8 x 21 x 8 ft with max continuous temperature rating of 500°F. Bi-parting doors at both ends allow for flow-through operation and structural supports are included inside work chamber for installation of overhead trolley rail system. Oven is suitable for curing powder paints, wet paints, varnish and epoxy; aging; bonding; composite curing; and drying.

Grieve Corporation, The
Round Lake, IL 60073-2898
Oct 07, 2004 Measuring 10 x 13 x 12 ft with 4 in. insulated walls, No. 933 gas-heated 250° vertical conveyor oven has 42 trays, each 72 in. wide x 23 in. long and rated for 100 lb. Trays lower vertically and pass back into heating zone, then exit at top and pass downward through cooling. Two 6,000 cfm, 5 hp recirculating blowers provide 12,000 cfm upward airflow, and four 24 in. dia tubeaxial fans, each driven by 5 hp motor, push/pull air through cooling zone.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Sep 29, 2004 ResinAid self-contained UV/visible light cure oven produces hearing aid shells using Loctite ResinAid molding compounds. System has 18 x 43 x 27 in. chamber, fully shielded and interlocked to ensure safe operation. Air cooling prevents devices from overheating, and reflector design provides uniform light distribution. Top-loading 8 x 8 in. curing chamber irradiates multiple assemblies simultaneously while blanketing parts with inert gas to ensure surface gloss quality.

Grieve Corporation, The
Round Lake, IL 60073-2898
Sep 02, 2004 With workspace dimensions of 18 x 96 x 15 in., electrically-heated No. 851 has 60 kW installed in Nichrome wire heating elements and two 1,000 cfm, 2 hp recirculating blowers that furnish downward vertical airflow. Oven features 5 in. insulated walls, aluminized steel exterior, and Type 304 stainless steel interior. It also incorporates digital indicating temperature controller and variable speed operation from 1.3–25.3 ipm.

Grieve Corporation, The
Round Lake, IL 60073-2898
Sep 01, 2004 Offering workspace dimensions of 36 in. x 15 ft. x 15 in., electrically-heated, 1,000°F No. 823 features 16 ga, Type 316L stainless steel interior, aluminized steel exterior, and 8 in. thick insulated walls. Rated at 7,800 cfm, 5 hp recirculating blower provides vertical downward air flow. Workload passes through unit on 30 x 1 x 1 in. 316L stainless steel flat wire conveyor belt with ¼ hp motor drive and digital controller, variable from 0.5–10 fpm.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Aug 30, 2004 Available in 14 low-viscosity and 8 high-viscosity verisons, Loctite® ResinAid molding compounds are offered in various colors to closely match natural skin tones. Compounds comply with ISO-10993 standards for skin surface medical devices. Line also includes 9 adhesive formulations for bonding shell components. Batch curing chamber, Loctite® ResinAid Shell Curing System, light cures multiple assemblies while blanketing parts with inert gas to ensure surface gloss.

Grieve Corporation, The
Round Lake, IL 60073-2898
Jul 27, 2004 Electrically heated No. 931 features 10 in. thick insulated walls, which are comprised of 2 in. of 1,900°F block and 8 in. of 10 lb/cf density rockwool insulation. In addition to aluminized steel exterior, unit has Type 304 stainless steel interior, motor-operated vertical lift door, and workspace dimensions of 25 x 36 x 24 in. Product has 18 kW installed in Incoloy-sheathed tubular heating elements and incorporates 1,000 cfm, 1 hp recirculating blower.

Grieve Corporation, The
Round Lake, IL 60073-2898
Jul 19, 2004 With workspace dimensions of 38 x 38 x 38 in., No. 930 cabinet oven is used for liquid flow solder masking under nitrogen atmosphere. It features 30 kW installed in Incoloy-sheathed tubular heating elements, while 1,500 cfm, 1½ hp recirculating blower provides horizontal airflow to load. Other features include 4 in. insulated walls, aluminized steel exterior, Type 430 stainless steel interior, and digital programming and manual reset excess temperature controllers.

Research, Inc.
Brooklyn Park, MN 55428
Jun 08, 2004 DryIR® Model 6040 concentrates IR heat directly to desired area, resulting in immediate evaporation. Designed for drying applications that require clean, responsive, non-contact heat source on target areas up to 4 in. wide, IR energy emitted from each heater can be adjusted to match specific heating requirements. Featuring modular construction, air-cooled unit incorporates digital power controller, aluminum construction, integral fan, and quartz lamps.

Grieve Corporation, The
Round Lake, IL 60073-2898
May 26, 2004 Electrically heated No. 929 is a 500°F cabinet oven with workspace dimensions of 26 x 38 x 50 in. Producing 700 cfm, ½ hp recirculating blower provides vertical upward airflow to as many as 16 shelves inside oven workspace. Oven features aluminized steel exterior, Type 304 stainless steel interior, and heavy-duty door and door frame with explosion-venting latches and 4 in. insulated walls.

Grieve Corporation, The
Round Lake, IL 60073-2898
Apr 23, 2004 Suited for curing Teflon, No. 927 is a 750°F oven with Incoloy sheathed tubular heating elements that provide 64 kW. Two hp recirculating blower delivers 3,300 cfm horizontal airflow to load. With workspace dimensions of 50 x 50 x 50 in., oven includes 2 stainless steel, high-temperature, HEPA recirculating air filters and one HEPA fresh air filter with 2 in. prefilter. Exterior is aluminized steel and interior is Type 304, 2B stainless steel.

Rubber Industries, Inc.
Shakopee, MN 55379
Mar 15, 2004 Bench Top Model 601 tests component swell and aging characteristics of molded rubber and rubber-like material formulations in fluids such as engine coolant, oil, and water at temperatures from 100–200°C. RI Model 601 has 6 testing stations for simultaneous testing of parts under pre-programmed time/temperature conditions. Digital PIC temperature controller maintains preset constant temperature without drifting above or below set point.

Grieve Corporation, The
Round Lake, IL 60073-2898
Feb 26, 2004 Electrically-heated, No. 926 is a 250°F oven with 12 kW installed in Nichrome wire elements and 1,000 cfm, 1 hp recirculating blower that provides horizontal flow. With workspace dimensions of 68 x 30 x 66 in., oven features 4 in. insulated walls, aluminized steel interior and exterior, plus 20 x 56 in. double-pane Lexan window in each of 2 doors. No. 926 includes disposable fresh air filter, digital indicating temperature controller, and remote control panel.

Grieve Corporation, The
Round Lake, IL 60073-2898
Dec 30, 2003 Used for preheating molds, No. 924 two-zone, 350°F belt conveyor oven has workspace dimensions of 24 in. x 5 ft in Zone One and 24 in. x 20 ft in Zone Two, with 15 in. of height throughout. It has 80 kW installed in Incoloy-sheathed tubular elements, 4 in. thick insulated walls, and aluminized steel interior and exterior. Its 18 in. wide, heavy-duty, flat wire conveyor belt has ½ hp motor drive variable from 1.4–27.8 in.

Glenro, Inc.
Paterson, NJ 07501 1799
Nov 25, 2003 Infrared tower uses 2 Radroundâ„¢ short wave IR heaters and drive system to cure silicone tubing at adjustable rates. Heaters have clamshell design and consist of rapid-response T3 lamps. Focused, 91.2 kW IR heat ensures tubing reaches green strength. Ready for product processing almost immediately on power-up, it cools fast enough so that product is not damaged when line stops. Parabolic reflectors direct IR energy to product for added efficiency.

Glenro, Inc.
Paterson, NJ 07501 1799
Nov 13, 2003 Infrared Conveyor Oven features bank of 6 Radplane™ electric infrared heaters rated at 9.8 kW each, controlled in single zone, for total power of 58.8 kW. Air input plenum provides air across full width of heated area. Temperature is regulated by SCR control system, housed in NEMA 12 enclosure, that uses thermocouple feedback control loop to regulate voltage and maintain constant element temperature. Speed controller regulates conveyor belt to 1–10 fpm.

Glenro, Inc.
Paterson, NJ 07501 1799
Oct 28, 2003 Infrared Oven preheats fine-gauge and braided wire prior to fluoropolymer extrusion. Cylindrical Radroundâ„¢ Series 40 electric infrared heaters incorporate quartz tubes that keep heat in process area. Oven packs 3 kW of power and measures 1.5 ft wide x 4 ft high. CS2000 controls use SCRs to regulate power input to infrared heating elements via thermocouple feedback control loops. Temperatures are adjustable and maintained automatically.

Grieve Corporation, The
Round Lake, IL 60073-2898
Oct 27, 2003 With workspace dimensions of 20 x 20 x 26 in., 500°F, electric No. 912 oven has stainless steel exterior and type 430 stainless steel interior with 4 in. thick insulated walls. It provides 10 KW with Incoloy-sheathed, tubular heating elements, and 600 cfm, ½ hp recirculating blower that generates horizontal airflow across workload. Features include 325 cfm powered forced exhauster, motorized damper, and digital indicating temperature controller.

Glenro, Inc.
Paterson, NJ 07501 1799
Oct 13, 2003 Stainless steel electric infrared oven, rated at 58.32 kW, measures 9.75 x 5.5 x 5.5 ft and is mounted on casters. Its 36 in. wide wire conveyor belt moves product through oven at rates from 4–40 fpm, while 36 medium wave quartz tube IR heaters with gold reflective backing provide cleanroom-quality heat transfer. There is 22 in. of conveyor at entrance and exit ends, and double-wall construction provides air cooling for oven enclosure.