CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Mar 23, 2011 Equipped with limit controls and heavy-duty core, Ruffneck(TM) FE2 is designed for rugged, industrial applications in harsh environments. Standard features include fan only switch, built-in thermostat, pilot light for HEAT ON indication, and built-in disconnect switch. Available in models that range from 2.5-23.1 kW and 220-440 V, heater also incorporates VacuCore® liquid-to-air heat exchanger and features junction box sized to facilitate installation.

Bell & Gossett    Morton Grove, IL 60053
Mar 23, 2011 Designed with complete peripheral copper braze for strength and 4 dedicated leak ports for leak detection, BPX(TM) BPDW Series features design pressure of 435 psi and max design temperature of 450°F. Double-wall heat exchangers are suited for residential hydronic heating applications such as radiant, snow melt, domestic hot water, and pool heating. They can also be used as refrigerant condensers, evaporators, and oil coolers.

Grieve Corporation, The    Round Lake, IL 60073-2898
Mar 22, 2011 Offering 48 x 48 x 72 in. workspace dimensions, No. 813 features 350,000 BTU/hr modulating natural gas burner for temperatures to 500°F and 3,300 cfm, 2 hp recirculating blower for horizontal airflow. Unit has 4 in. insulated walls, aluminized stainless steel interior and exterior, and 2 in. insulated floor with truck wheel guide tracks. Safety equipment, such as 325 cfm 1/3 hp powered force exhauster, is included as required by IRI, FM, and NFPA Standard 86.

Heat Trace Products, LLC    Leominster, MA 01453
Mar 18, 2011 Available in 5, 10, 20, 50, 100, and 200 ft lengths, T-Links Self-Regulating Heating Cables provide specified amount of heat anywhere along their length in direct response to local temperature or thermodynamic variations to maintain process heating and prevent freezing. Cables maintain temperatures up to 150°F and will not burnout if overlapped. Offered in 3, 5, 8, and 10 W/ft version in 120 and 240 V, cables can be stepped up or down and LED lights can be installed anywhere.

UV III Systems, Inc.    Alburg, VT 05440
Mar 11, 2011 Able to dry coatings in minutes, Ecocure light oven can be customized to meet end-user demands concerning number of lamps required to cure customer's part. Electronic timer-controlled unit - available in 120 V version on wheels for portability or 220 V, single-phase model - has filtered air cooling system and part rotator. Offering one-button operation, system is not dependent upon computer and allows installation of replacement bulbs in ~30 sec.

Wisconsin Oven Corp.    East Troy, WI 53120
Mar 08, 2011 Built with 18 x 15 x 6.5 ft chamber, electrically heated walk-in batch oven has 302°F max operating temperature and is constructed with 6 in. thick tongue and groove panel assemblies and 20 gauge aluminized steel interior and ductwork. Heating system features incoloy sheathed heating elements for 300 kW total heat input with SCR power control, and recirculation system employs 27,000 cfm @ 20 hp blower and combination airflow to maximize heating rates and temperature uniformity.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Feb 28, 2011 Available in 100, 115, and 230 Vac, 50/60 Hz versions, EchoTherm(TM) HP61 and HS61 feature 10 program memory with 10 steps per program, temperature ramping, RS232 I/O port, membrane keyboard, and full-function LCD where all parameters are continuously visible. Heater tops, offered in ceramic or milled-flat cast aluminum, are 12 x 12 in. with 1,400 W heaters. Temperatures can be set to 450°C on ceramic topped units and to 400°C on cast aluminum tops. Stirrer speeds can be set from 100-1,500 rpm.

Radio Frequency Co., Inc.    Millis, MA 02054
Feb 21, 2011 Macrowave(TM) SMC Preheater for plastic sheet molding compound (SMC) utilizes Radio Frequency Heating Technology and provides uniform heating throughout entire thickness of compound. Capable of preheating SMC loads up to 30 x 84 in. in less than 1 min, system has PLC which controls heat cycle time, power level, and conveyor movement to synchronize with press operation. Product's conveyor can feed SMC charge straight through press or return it to feed end after heating.

Chromalox    Pittsburgh, PA 15238
Feb 17, 2011 Using single power supply, Skin-Effect Heating System provides freeze protection, temperature maintenance, and heat-up. Small steel tube containing skin-effect electric cable is banded onto pipe to transfer conductive heating directly to pipe wall. Heat input can be adjusted up to 300°F to handle range of thermal viscosities, including water, crude or refined oils, steam, and variety of chemicals. With no moving parts, system is suited for above ground, buried, or submerged pipes.

Hamworthy Peabody Combustion Inc.    Shelton, CT 06484
Feb 15, 2011 Designed to retrofit to existing burners, regardless of original manufacturer, Q-jet(TM) Low NOx Burner Optimization Kit achieves NOx reductions up to 35% on gas firing and up to 40% on oil firing when equipped with SPIROjet(TM) low NOx atomizer. System eliminates need to replace complete burner assemblies to meet emissions requirements. Q-jet(TM) works with variety of models ranging from single burner boilers up to multi-burner utility boilers.

Solar Air Systems    Avon, MA 02072
Feb 11, 2011 Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.

David Weisman, LLC    Stamford, CT 06903
Feb 10, 2011 Featuring electric infrared heater elements and insulated enclosures, Hot Box Clamshell Tunnel Systems preheat wire and cable products prior to coating, and dry and cure solvent- and water-based inks, liquid coatings, and powder coatings on wire/cable products. Controls come standard with closed loop feedback operating off of heater coil temperature. Suitable for horizontal or vertical orientation, systems are modular in design for addition of more heated length as required.

Despatch Industries    Lakeville, MN 55044
Feb 09, 2011 Featuring horizontal, recirculating airflow, Model RFF1-42 is designed to ensure temperature uniformity throughout oven. Temperature range and small benchtop footprint make oven suitable for laboratory use, process development work, and small batch applications. Unit is also available with Class A option for use with applications involving flammable solvents.

Despatch Industries    Lakeville, MN 55044
Feb 09, 2011 Designed to meet Class A requirements for applications dealing with flammable solvents, Model LAC1-38 provides horizontal, uniform airflow and temperatures up to 260°C. Unit contains stainless steel interior, UL industrial control panel, and forced exhaust assembly with purge timer, foil membrane pressure relief, and airflow switch to meet NFPA 86 requirements.

IRphotonics    Hamden, CT 06518
Feb 08, 2011 With VIS Optical Filter installed, iCure® AS200 Thermal Spot Curing System can handle heat-sensitive plastics used in disposable medical devices. Filter, utilizing thin film technology, eliminates all visible wavelengths except for mild red pointer glow to provide infrared energy above 800 nm. When coupled with iCure portable inline fiber optic system, filter accelerates curing of 2-part glues without affecting heat-sensitive thermoplastics.

Aps Novastar LLC    Huntingdon Valley, PA 19006
Jan 26, 2011 With 5 vertical heating zones and 1 cooling zone, ERO-500 conveyor reflow oven accommodates small- to medium-volume reflow soldering of SMT boards and hybrid boards as well as curing of glue or thick film pastes. Max temperature is 320°C, allowing optimized reflow profiles for Pb-free and Pb solder. Independently programmable heating zones are controlled through on-board LCD system controller, and plenum convection heating technology provides uniform temperature profiling across PCB.

Grieve Corporation, The    Round Lake, IL 60073-2898
Jan 24, 2011 Along with 52 kW installed in nickel chrome wire coils supported by stainless steel frame, No. 863 features 48 x 30 x 30 in. workspace dimensions and 7 in. thick insulated walls with stainless steel covers. Heat resisting alloy recirculating blower, powered by 7 ½ hp motor with V-belt drive, provides upward airflow to oven. Reaching 1,400°F max, furnace incorporates 4-point strip chart recorder and inert atmosphere inlet and outlet.

David Weisman, LLC    Stamford, CT 06903
Jan 13, 2011 Featuring electrically heated or gas-fired hot air plenum and controls, Up Down Conveyorized Parallel Chain Ovens provide vertical bottom up airflow as standard, but options for top down or horizontal air flow are available as well. Systems include exhaust system and insulated stainless or aluminized steel oven enclosure. Equipped with chart recorder for temperature documentation, ovens are suited for medical or other applications where tight temperature uniformity is critical.

CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Jan 05, 2011 Designed and built to meet requirements of both UL499 and UL1030, epoxy-based High Temperature End Seal is rated up to 392°F and is suited for Caloritech(TM) tubular heating elements used in demanding applications such as industrial process heating equipment and commercial heating and cooking appliances. Heating elements using end seal are protected from effects of moisture absorption during operation, transport, and extended storage periods.

E TIP, Inc.    North Aurora, IL 60542
Dec 31, 2010 Available in sizes based on 120 or 240 V energy needed for capacity of housing, Universal Low Watt Density Preheater(TM) Kits feature flexible silicone/fiberglass heating pad that mounts to outside of housing using permanent adhesive. Flexible ceramic insulation is mounted on top of preheater to keep electrical energy draw low. Preheater converts metal of housing into heat transfer element, eliminating burning oil by exposing large surface of oil to low watt heat.