Locating Gages

Test & Measuring Instruments

Leak Location System aids production, repair loop applications.

July 16, 2015

Offered as benchtop combo package, atmospheric leak location system integrates TracerMate CS charge gas system and INFICON Sentrac hydrogen leak detector. TracerMate instrument, utilizing internal pneumatics for part evacuation and backfill, initiates and manages testing sequences. Detected leaks are reported by leak rate volume, audible alert, and color status light. At end of test cycle, TracerMate re-evacuates and vents part to control Hydrogen background for future test cycles. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Water Leak Detector sensor listens for water from cracked pipe.

June 25, 2015

With maximized sound amplification, Gen-Ear LE® can pinpoint water leaks in residential and commercial water lines under concrete, asphalt, or tile. Handheld amplifier fits in operator's palm and provides noise-free amplification with built-in preset audio filters, while headphones with noise cancellation features block out interference from surrounding ambient noise. Probe rods, magnetic attachment, and Sound Amplification Module address specific areas of use.
Read More

Test & Measuring Instruments

Tone and Probe Set traces cable locations.

May 29, 2015

Featuring steady tone, push-to-scan button and clear loudspeaker, TP150 Tone and Probe Set lets users trace and identify cable locations on jacks or through walls. Probe, offering 100 Hz~300 KHz sensitivity, has tapered tip for penetration of cable bundles and side thumb wheel that adjusts volume and turns off power. Tone generator includes slide switch to select TONE/OFF/CONT, continuity mode to verify if wire is broken, alligator clips to test pairs, and RJ11 connector for data or phone lines. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Pipe/Cable Locator leverages cloud, GPS, mobile technologies.

March 27, 2015

Delivering cloud-based mobile locating technologies, UTTO® connects locate device, field worker, and damage prevention process. Cloud-based platform, mobile tablet app, and networked locator device capture and store locate and position data without requiring changing of field technicians work practice or procedures. By locating target using GPS technology and cloud-connected satellite updates, solution maps underground assets to within 1 m and works with existing locate devices. Read More

Test & Measuring Instruments, Communication Systems & Equipment

Ground Penetrating Radar System locates utilities.

November 26, 2014

Capable of locating metallic and non-metallic targets, UtilityScan GPR System enables users to identify and mark location and depth of subsurface utilities such as gas, sewer, and communication lines as well as perform tasks such as environmental remediation, road inspection, and concrete scanning. System offers real-time data collection with ability to store and replay data. With 10 cart, antenna, and control unit configurations, UtilityScan can be tailored to meet wide range of needs. Read More

Test & Measuring Instruments

Wire Tracer finds and identifies breakers and fuses.

November 17, 2014

Available in two kits, AT-7000 Advanced Wire Tracer combines receiver and transmitter to locate energized and de-energized wires, breakers, and fuses. Smart Sensor™ array, combined with signal processor, measures changes in detected signal multiple times per second. Displayed on dynamic, color LCD, wire orientation and direction are accurate within 2 in. To eliminate multiple false positive readings, scan and locate feature identifies specific breaker or fuse. Read More

Test & Measuring Instruments

Line Locator features integrated Bluetooth® and GPS.

July 15, 2014

With SeekTech SR-24, users can locate and create accurate maps of underground utilities to protect critical assets. Unit uses Bluetooth® communications to transmit locating data to third-party survey grade GPS or mobile device such as tablet or smartphone. Using data logging capabilities, GPS and locating data can be recorded to onboard micro SD card. In addition to OmniSeek® passive locating capabilities, SR-24 can be programmed to detect any active frequency from 10 Hz to 35 kHz. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Display & Presentation Equipment, Services

Pressure Decay Leak Tester has single-channel, benchtop design.

May 20, 2014

Available in 5 pressure ranges from vacuum to 150 psi with resolution to 0.001 psi, Raptor™ offers 10 discrete DIOs that allow automation via PLC or computer interface. UI on built-in touchscreen color display shows pressure plot, countdown timers, step results, coupling outputs, and current test pressure, while 10 on-board programs provide versatility for testing different types of parts. Internal Stallion™ valve manifold block features self-cleaning valves and individual valve port control. Read More

Test & Measuring Instruments, Communication Systems & Equipment

5 W Transmitter helps locate pipes and utilities.

February 13, 2014

With 4 trace frequencies of 1, 8, 33, or 65 KHz, 5 Watt Gen-Eye Hot Spot™ Transmitter enables users to select frequency and power that best suits application. Graphic LCD with auto backlight indicates line resistance and current flow as well as battery level, output level, USB connection, connectivity, type of transmission, and active frequencies. Battery life keeps unit operating up to 100 hr, while selectable automatic shutdown feature helps save power. Read More

Test & Measuring Instruments

Pipe Locator utilizes graphic icons to lead users to target.

October 17, 2013

With intuitive directional mapping and guidance system, Gen-Eye Hot Spot™ facilitates locating of pipe inspection cameras, sondes, active power lines, and buried utilities. Total field antenna array allows users to locate from any direction, while backlit LCD provides graphic icons that lead users directly to target. Locator's depth range is up to 10 ft in cast iron pipe and 20 ft in clay or plastic pipe. Rated at IP65, locator is dirt and dust proof as well as water-resistant. Read More

Test & Measuring Instruments, Mechanical Components & Assemblies, Fasteners & Hardware

Fixture Locator enables machining of multiple parts/load.

May 14, 2013

Engineered for locating, attaching, and removing fixtures, subplates, and vises on machining centers, PinLock™ System consists of high-precision pins, bushings, and liners that provide locating and locking repeatability up to ±.0005 in. Shanks and bushings are precision machined of heat-treated, alloy steel with black oxide finish. Helical extraction design and pin feature aids in overcoming binding in side load conditions and optimizes removal of PinLock in any application. Read More

Test & Measuring Instruments, Portable Tools

Circuit Tracer locates wires and cables behind walls.

April 11, 2013

Offering 4 defined ranges, SureTrace™ lets electricians select proper sensitivity for specific job. Circuit tracer pinpoints opens/shorts and identifies fuses and breakers on both energized and de-energized circuits from 0-600 Vac/Vdc. Unit includes display that provides numeric value between 0–99, variable pitch/tone audible indication, and peak detector that instantaneously registers signal strength. To minimize false signaling on noisy circuits, handset signal communication is tuned tight. Read More

Test & Measuring Instruments

Optical Cable Routing Detector operates with dual frequencies.

November 16, 2012

Integrating transmitter and receiver, Model C0290001 detects route and depth of buried optical fiber cable. Unit utilizes multi-coil electromagnetic technology and advanced digital signal processing for accurate location. It provides multi-transmit modes including injection method, inductance method, and clamp method which operate at dual frequencies of 480 Hz and 31 Hz. In addition to automatic gain adjustment, detector includes pipeline state detection and low battery indication. Read More

Test & Measuring Instruments, Services

Mobile Device Tracker covers 165 countries.

March 7, 2012

Global Cell-ID(TM) allows enterprise mobile developers to acquire carrier-certified, permission-based location on their devices in over 165 countries globally. With enhanced location APIs, location-as-a-service (LaaS) platform can deliver mobile device location, even if device has roamed out of the country. LaaS system is designed for global brands and logistics companies such as financial services, security, telematics, M2M, and logistics companies and operations. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Real Time Location System monitors healthcare worker hand hygiene.

February 24, 2011

To prevent spread of infections and diseases, Wi-Fi Hand Hygiene Monitoring System tracks staff interactions with patients and measures hand hygiene activity down to individual caregiver. Solution combines location-enabled staff badges with beacons that are embedded into GOJO's SmartLink(TM) Dispensers located throughout hospital. Badges enable RTLS system to monitor when staff washes hands before and after interacting with patient to calculate compliance based on hospital policy. Read More

Test & Measuring Instruments, Communication Systems & Equipment

Personal Locator Beacon provides 2-way voice communication.

November 17, 2010

Offering single-handed operation of all features, Model SPLB-M operates at 406 MHz frequency of COSPAS-SARSAT satellite system as well as international emergency beacon frequencies of 121.5 and 243 MHz. Embedded GPS receiver allows for automatic geo-location positioning and reporting with better than 33 ft accuracy. Internal G-switch automatically activates device in beacon-mode upon bailout, while lanyard-actuated magnetic switch delivers additional mechanical and manual activation options. Read More

Test & Measuring Instruments, Electrical Equipment & Systems, Optics & Photonics

Transmitter helps locate underground utility lines.

March 9, 2009

Dynatel Locators 2200M Series 12 W transmitter provides four active frequencies (577 Hz and 8, 33, and 200 kHz), which can be used individually or simultaneously to compensate varying field conditions and 3 induction frequencies (8, 33, and 200 kHz). It uses either internal 6 x C-size alkaline batteries or rechargeable sealed gel-cell battery that plugs into external power plug. Unit features ohmmeter function and high voltage detection, with 240 Vac output protection. Read More

Test & Measuring Instruments

Rebar Locator suits construction/renovation projects.

December 13, 2004

Hilti PS 200 Ferroscan detects rebar and other ferrous objects in concrete. Portable unit, able to be used by one person, provides on-site rebar depth, diameter, and location information. Comprised of PS 200 S Scanner and PS 200 M monitor, wireless system has integrated LCD display, block scan capability, and 32 Mb memory card. Unit can transfer data to PC or laptop via USB connection, and headset connection lets users record 15 sec voice memo per scan. Read More

Test & Measuring Instruments

Locator guides users to cameras and transmitters.

November 24, 2004

Featuring multi-directional antenna technology, NaviTrack Scout(TM) uses 4 distinct sonde frequencies to locate cameras and remote transmitters while eliminating nulls and false peaks. It can be used to trace 3 line trace frequencies as well as passive ac. Unit includes digital readout with micro-mapping display. Display panel shows digital strength, sonde/lone trace frequency, depth over target, battery strength, and target's field angle. Read More

Test & Measuring Instruments

Leak Test Systems offer real-time process control.

October 9, 2003

Falcon Leak Test System simultaneously locates and calculates leak rate. Using Intelense technology with sensitivity to 10-5 sccs, system bridges gap between pressure decay technology and helium vacuum mass spectrometry. Sentinel M24 Leak Test Instrument, offered in single- or multiple-station configurations, includes VFD graphic display, operator interface, and ability to communicate directly to factory or other networks via Ethernet or RS232 and RS485 ports. Read More