Services, Software

Truck Fleet Software schedules deliveries in real time.

April 22, 2002

Enhancements to A.MAZE 2.0 fleet optimization software include Real Time Feedback and Response (RTFR), fast geocoding and cartography access, ability to handle larger number of constraints, and Web Services. RTFR allows software to dynamically accept new orders, re-optimize and provide most efficient pickup and delivery schedules to vehicles. Web Services allows software to interface to supply... Read More

Mounting & Attaching Products, Services

Interface connects to any PLC.

April 18, 2002

QuickBloc Universal PLC interface has 8 or 16 channels, connects to any manufacturer's PLC, and has choice of screw or tension clamp technology. It comes with terminals, pre-wired cable with flying leads ready to attach to any PLC's front panel adapter, and pre-printed marking tags. Options are available for fusing, analog signals, and PCB versions that use pluggable cable system. Read More

Services, Test & Measuring Instruments

Accelerometer Calibration System provides NIST traceability.

April 18, 2002

VibraCal Lite provides back-to-back comparison calibration of most accelerometer types, ranging from charge and voltage type piezoelectric to bridge type piezoresistive sensors. Test accelerometer output can be single-ended or differential, ac or dc coupled, isolated or grounded. System complies with ANSI/NCSL Z540-1-1994 and ISO Guide 17025:2000. Test configurations and test data are stored... Read More

Electrical Equipment & Systems, Services

Battery Maintenance System helps prevent dead batteries.

April 18, 2002

PowerPulse(R) electronic device uses battery's own energy to help prevent sulfation buildup and related problems, extending battery life and maintaining peak efficiency. Using ReNew-IT Pulse Technology, it collects small amount of energy from battery, reconditions it and returns it to battery as pulsating dc current. This current re-energizes and removes lead sulfate deposits from plates and then... Read More

Adhesives & Sealants, Architectural and Civil Engineering Products, Services

Roof Patch temporarily seals holes and plugs leaks.

April 17, 2002

SEAL-IT(TM) water-based, asphalt emulsion stops leaks on flat roofs in any weather above 40°F. It minimizes water-damage to any interior by forming waterproof patches on holes and cracks in minutes. Once exposed to air, it hardens to flexible patch that can remain in place when permanent repair is made. Read More

Communication Systems & Equipment, Services

Audio Board is suitable for embedded systems.

April 16, 2002

Compatible with PC/104-Plus SoundBlaster Pro(TM), PPM-Audio can record, compress, store, and playback voice, sound, and music. It measures 3.6 x 3.8 in., and includes audio signal processor that provides simultaneous support for multiple audio streams. With its built-in DSP core and 7 external I/O sources, PPM-Audio requires +5 Vdc, and draws 225 mA (typical). Read More

Health, Medical, & Dental Supplies and Equipment, Services

Rapid Molding Process makes medical components.

April 10, 2002

ZA-12 casting process uses permanent graphite molds to produce parts from ZA-12 zinc-aluminum alloy. Castings can include contours, surface elevations, holes, and other precise features. Process is suitable for making high-precision components for medical equipment and is economical in quantities of 300 to 20,000 parts per year. Company provides design, rapid prototyping, tooling and mold... Read More

Adhesives & Sealants, Services

High-Strength Adhesive bonds thin metals.

April 10, 2002

Metal Welder(TM) structural methacrylate adhesive is designed for bonding metal to other metals or to dissimilar substrates. It provides impact and peel resistance on bare, painted, plated or galvanized metals. Adhesive cures at room temperature in 1 hour. It produces permanent, load-bearing bonds that are resistant to weathering, humidity, temperatures to 250 deg F, and thermal shock. Tensile... Read More

Architectural and Civil Engineering Products, Services

Rubber Roof Repair Formulas bond to weathered EPDM roofs.

April 8, 2002

FLEXGUARD(TM) CEMENT and COATING rubber roof repair systems smooth surfaces and lower building temperatures. FLEXGUARD CEMENT's synthetic rubber formula seals leaks and seams, while FLEXGUARD COATING restores and extends roof-life. Both withstand water, snow, ice, and sun, and provide new weathering surfaces within 1-3 hours of application. FLEXGUARD CEMENT is available in white, and COATING is... Read More

Machinery & Machining Tools, Services

Drilling System drills deep holes fast.

April 3, 2002

Model 200 BTA system has drilling capacity of 2.5 in. dia and 84 in. effective drilling depth. It is equipped with special refrigeration for proper coolant temperature control. Counter-rotation of workpiece helps system attain close tolerances. System drills nickel-base Inconel 600 and 700 series workpieces at penetration rate of 1.5 in./min. Read More

Machinery & Machining Tools, Services

Blaster cleans castings and deflashes dies.

April 3, 2002

Wheelabrator(R)45 cu ft Super V Tumblast(TM) is suitable for castings, diecast deflashing, contaminant removal, peening, and surface finishing. Direct-drive 75 hp motors power two 15 in. bi-directional wheel assemblies. Cast-manganese housings have LongLyfe(R) cast liners for durability. Control panel has programmable electric controls or relay logic in NEMA 12 enclosure. Machine holds 45 cu ft... Read More

Optics & Photonics, Services

Laser Target works with rotating alignment systems.

April 2, 2002

Indoor scan target, with self-contained numeric readout, is compatible with any manufacturer's continuously sweeping laser alignment system. Model A-1531 has max resolution of 0.010 in. Model A-1532 has max resolution of 0.005 in. Radial range, governed by rotation speed and spot size, is 100 ft. max. Target displays readings relative to target center, relative to zero, or relative to base of... Read More

Computer Hardware & Peripherals, Services

Device Programmer works in field without computer.

March 26, 2002

Model 869 programs, tests, repairs, or re-programs any electronic device using memory IC either connected to computer, or in field without computer. Universal Stand Alone Device programmer has 4,322 device library, which supports PROMs, EPROMs, PLDs, and Microcontrollers. Test capabilities include IC test for TTL and CMOS Logic ICs and Device Insertion Tests. Windows-compatible software interface... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Services

Thermoplastic Seals handle high temperatures.

March 25, 2002

UltraCOMP(TM) engineered thermoplastics are resistant to creep and fatigue in temperatures up to 500 deg F. Chemical, electrical-, and radiation-resistant seals can operate continuously and be regularly sterilized by steam, as common with medical device seals. Material is available in 4 formulations: virgin, carbon fiber-filled, glass-filled, and carbon/graphite/PTFE-filled. Tube sizes are up to... Read More

Architectural and Civil Engineering Products, Fasteners & Hardware, Mechanical Components and Assemblies, Services

Castings reduce road renovation time.

March 20, 2002

Final Cut castings eliminate need for pavement removal around street castings. Cover and rim elevation of manholes, catch basins, and hand holes can be raised by 1 1/2 in., regardless of thickness of cover. Cast iron construction provides corrosion resistance and durability. Combination of Final Cut rim, riser and cover allows use of BMPs for control of erosion and sedimentation. Read More

Services, Software

Integrated Development Environment produces fast ZSP code.

March 19, 2002

MULTI(R) Integrated Development Environment (IDE), along with optmizing compilers, automates embedded software development for LSI Logic's ZSP(TM) digital signal processors. With peak performance of 800 MIPS at 200 MHz, ZSP400 cores can execute 400 million multiply-accumulate operations per second. MULTI IDE includes window-oriented editor, ZSP-optimized source-level debugger, graphical program... Read More

Material Handling & Storage, Services

Intermediate Bulk Container resists bulging without steel.

March 15, 2002

OTP-All-Plastic IBC can be used for shipping and storage of heavy products with specific gravity ratings up to 1.6, such as adhesives, sauces, gravies, paints, and coatings. Supported by reinforcing ribs, IBC resists bulging and ensures structural integrity without requiring steel frames or cages. Rotomolded of LLDPE, it accommodates 4-way lift access, stacks 2 high when full and 3 high when... Read More

Services, Software

Auditing and Tracking Software alerts and reminds about events.

March 14, 2002

Tracer v4.0 web-based corrective action tracking software has automatic e-mail notification. It can send reminder action due date or notify entire response team when status changes for selected actions. Tracer works with any e-mail system. Auditor v5.3 regulatory compliance auditing and research software includes coverage of OSHA 300 Recordkeeping Rule, expanded NESHAPS and updated regulatory... Read More

Machinery & Machining Tools, Material Handling & Storage, Services

Sheet Stacker cuts, conveys and accumulates.

March 13, 2002

High Speed Rotary Sheeter/Stacker processes rolls of material into sheets at up to 1,000 ft/min. Sheeter portion has rotary single-knife fixed-bed cutter. Sheets are conveyed on vacuum conveyor to point where material is knocked off belt onto stacker. When stack is full it automatically lowers for off-loading, while secondary finger-tray keeps collecting sheets. When off-loading is complete,... Read More

Machinery & Machining Tools, Services

Abrasive Belt Machine has thermally insulated housing.

March 12, 2002

Dynafile portable, air-powered machine grinds, deburrs, blends and finishes normally inaccessible areas on metal, plastic, fiberglass and other composites. Composite, quick-change housing cover allows for easier contact arm and abrasive belt change. Over 30 different interchangeable contact arms are available. Machine operates at 20,000 rpm, and uses coated abrasive belts 1/2, 1/4, or 1/8 in.... Read More