Services

Services

NEMA's Bill Hoyt named co-chair for 2016 Motor Summit.

Sep 27, 2016

Impact Energy, an international operating center of competence for energy efficiency, recently announced that NEMA Industry Director Bill Hoyt will co-chair the 2016 International Motor Summit for Energy Efficiency, to be held on October 11-12 in Zurich, Switzerland. Summit attendees will explore new and existing electric motor technologies with the potential to reduce energy demand by 20–30%... Read More

Services, Transportation Industry Products

United States Postal Service Awards NGDV Prototype Contract to VT Hackney - Workhorse Group Team

Sep 26, 2016

VT Hackney and Workhorse Group Team Enter Prototype and Testing Phase of USPS Next Generation Delivery Vehicle (NGDV) Program CINCINNATI - An exclusive partnership of Workhorse Group Inc. (NASDAQ:WKHS) and VT Hackney has been selected as one of six manufacturers awarded a prototype contract by the United States Postal Service (USPS) to build and deliver prototype vehicles for the Next Generation... Read More

Services

Media invited to Starliner training simulation.

Sep 26, 2016

On Sept 28, NASA and Boeing will mark installation of new CST-100 Starliner spacecraft training devices in Jake Garn Mission Simulator and Training Facility at Johnson Space Center in Houston. Boeing is one of two companies agency's Commercial Crew Program contracted to return crew launch capability to U.S. Media are invited to participate in roundtable discussion with NASA and Boeing... Read More

Services

EPA Releases Assessment of port air pollution reduction plans.

Sep 26, 2016

As found by "The National Port Strategy Assessment: Reducing Air Pollution and Greenhouse Gases at U.S. Ports," air pollution at U.S. ports can be reduced significantly through various strategies and cleaner technologies. Report examines current and future emission trends from diesel engines in port areas and explores emissions reduction potential of such strategies as replacing and repowering... Read More

Services

ASC to Exhibit at Composites and Advanced Materials Expo.

Sep 26, 2016

In Anaheim, CA at Composites and Advanced Materials Expo (CAMX), Adhesive and Sealant Council (ASC) will exhibit and encourage use and value that adhesives play in bonding dissimilar materials. ASC will be in booth D97, located near ACE Awards Stage and across from ACMA's booth, from September 27–29 and will also host 2 speakers – Marc Benevento (Industrial Marketing Insights) and Ana... Read More

Services

IPC Calls for Submissions of poster abstracts for IPC APEX EXPO.

Sep 26, 2016

IPC — Association Connecting Electronics Industries® invites researchers, technical experts, and industry leaders to submit abstracts for poster presentations at IPC APEX EXPO®. Technical poster presentations, which are being sought on relevant electronics topics, including design, materials, assembly, processes, and equipment, are scheduled for February 15, 2017 and will be displayed... Read More

Services

Multiple NREL Technologies named as finalists for R&D 100 Awards.

Sep 23, 2016

Technologies developed by researchers at NREL, and third developed via collaboration between Wolfspeed, NREL, Toyota, and University of Arkansas National Center for Reliable Electric Power Transmission, are finalists for 2016 R&D 100 Awards presented by R&D Magazine. This year's finalists are NREL's Battery Internal Short-Circuit (ISC) Device and EcoSnap-AC Heat Pump as well as NREL... Read More

Services

EPA Funding helps research water quality benefits.

Sep 23, 2016

U.S. EPA announced $4.8 million in funding to 6 universities that will work with local communities to better understand the economic value of water quality. Research grants will help communities and experts conduct benefit-cost analyses for actions that protect waterways. Research will also provide critical link between water quality science and monetary value of services that healthy waterways... Read More

Services

Serialization Service provides guidance to CMOs/CPOs. .

Sep 23, 2016

With Vantage Streamlined Serialization™ for CMOs/CPOs, contractors can help pharmaceutical companies meet regulatory serialization mandates. Vantage Consulting Group conducts initial engagement that typically includes definition and gap identification; as is/to be analysis; production line impact analysis; capital cost review/recommendations; and vendor definitions. Service is suited for... Read More

Material Handling & Storage, Services

Carylon Corporation Partners with JD7 to Bring 'Innovation And Investigation' to United States Water Utilities

Sep 22, 2016

Carylon Corporation has completed the purchase of several state-of-the-art pipeline asset management and investigative technologies from JD7, which will allow the Company to inspect and conduct condition assessments in live pressure water mains across the United States. San Diego, CA – JD7, a subsidiary of Aquam Corporation announced today its partnership with Carylon Corporation, a North... Read More

Services

Peak Production Adopts Stratasys FDM 3D Printing to Innovate Its Tooling Process and Increase Manufacturing Efficiency

Sep 22, 2016

3D printing jigs and fixtures 24/7, the company reports a reduction in lead times of up to 90% on plastic parts compared to traditional CNC Machining, while slashing production costs by 50% in many cases The ability to produce high performance 3D printed parts that can match the strength of traditional tools, fast and more cost-effectively, offers manufacturers a new way to innovate, increase... Read More

Services

NEO Tech Offers Microelectronics Miniaturization for Medical Implantable Device OEMs

Sep 22, 2016

CHATSWORTH, Calif. - NEO Tech, a leading provider of manufacturing technology and supply chain solutions for brand name OEMs in the industrial, medical and mil/aero markets, announced that its highly miniaturized electronic manufacturing capabilities were being deployed in advanced implantable devices and electroceuticals for the medial industry. Advanced implantable devices such as neuro... Read More

Health, Medical, & Dental Supplies and Equipment, Services

Design Service enables one-surgery, single-day jaw reconstruction.

Sep 22, 2016

Leveraging digital-to-physical workflow, Jaw in a Day® enables surgeons to perform full jaw reconstruction in one surgery. This patient-specific solution, enabled by VSP® (Virtual Surgical Planning) Reconstruction service, pairs surgeons with engineers who utilize digital CAD/CAM technology to create personalized surgical plan and design patient-specific surgical guides, models,... Read More

Services

LED A-Line Lamp Shipments decrease in second quarter of 2016.

Sep 22, 2016

LED A-line lamp shipments posted 21.2 quarter-over-quarter decrease in second quarter compared to last quarter, but still continue year-over-year growth increasing 40.6%. Halogen A-line lamps show virtually no year-over-year growth at 0.2%, but after decrease in first quarter see 14.5% increase this quarter. Incandescent A-line lamps posted 8.8% year-over-year increase and 44.8%... Read More

Services

AIM-Published Guidance aids RFID tag system implementation.

Sep 22, 2016

Released by AIM, "Guidance on Data Content and Structure in Passive Tags" will help system integrators select best options when installing RFID tag systems to identify objects. Guideline fosters understanding of options, along with components to detail numbering standards that currently exist, as well as which resources offer optimal compatibility of numbering. AIM's COO Mary Lou Bosco... Read More

Services

ACGIH Course covers ventilation basics, equations application.

Sep 22, 2016

ACGIH® and its Industrial Ventilation Committee will present "Fundamentals in Industrial Ventilation & Practical Applications of Useful Equations" from October 31 to November 4, 2016 in Cincinnati, OH. This continuing education course, offering 32 hr of instruction, covers basic and advanced topics related to industrial ventilation and closely follows ACGIH's Quantitative Industrial... Read More

Services

ACGIH Presents Webinar for Upper Limb Localized Fatigue TLV.

Sep 22, 2016

Taking place November 17, 2016 from 3:00–4:00 pm EDT, ACGIH®'s Upper Limb Localized Fatigue TLV® webinar will provide guidance for preventing upper extremity musculoskeletal fatigue among workers who perform cyclical work for ≥2 hr/day. Content, presented by David M. Rempel with further contribution from Thomas J. Armstrong, will include introduction to localized fatigue,... Read More

Services

IPC announces Flexible Hybrid Printed Electronics Pavilion.

Sep 22, 2016

During IPC APEX EXPO® 2017 in San Diego, IPC will debut Flexible Hybrid Printed Electronics Pavilion, which will showcase the growing printed electronics technology sector and how these technologies also apply to hybrid PCBs and PCB assemblies. In addition to show floor pavilion, planned Flexible Hybrid Printed Electronics programming will include technical paper sessions, management-focused... Read More

Services, Test & Measuring Instruments

Testing Services validate integrity of materials.

Sep 22, 2016

With Material Validation Testing Center, company can verify identity and integrity of precision bar products, mitigating material risk. Equipment can test for internal and surface defects as well as alloy verification. This is important for industries where metal identification is critical to application such as aerospace and medical. Company can provide Ultrasonic Testing, Eddy Current Testing,... Read More

Services

EPA encourages proper septic system maintenance.

Sep 21, 2016

U.S. EPA, in conjunction with federal, state, and local government and private sector partners, kicked off fourth annual SepticSmart Week to encourage homeowners and communities to properly maintain their septic systems. This helps protect public health and the environment and saves money by avoiding costly repairs. Tips include: inspecting every 3 years; avoiding pouring fats, grease, and solids... Read More