Portable Tools

Compact Angle Grinders are available with ergonomic handle.

October 2, 2015

Solid entry, Power product, and Inox series include ergonomic compact angle grinders that are available with narrow FEIN ErgoGrip (Rat Tail) handle. Extended toward the rear, this 4 ¾ in. long handle enables continuous work while minimizing fatigue and promoting secure grip and machine control with defined hand position. Suitable for users in trade and industry who perform frequent heavy grinding and cutting, 1,100–1,500 W tools are available with lockable or constant pressure switches. Read More

Portable Tools, Machinery & Machining Tools

Compact Angle Grinder features ergonomic grip.

October 2, 2015

Equipped with 760 W motor that provides no-load speed of 12,500 rpm, FEIN WSG 7-115 rotates in 90° steps. Tool features 4.5 in. grinding wheel, full metal gear head, long-life carbon brushes, and dust protection on all electronic components. Smaller ergonomic grip optimizes control and minimizes fatigue while grinding for long periods of time. Read More

Portable Tools, Machinery & Machining Tools

Cordless Grinders utilize 18 V battery with 4 Ah capacity.

September 14, 2015

Available with ¼ in. or 6 mm chuck, ASC 9 Straight Grinder operates at speeds of 9,000 rpm and is suitable for work with non-woven brushes and flap wheels. ABC 7 Belt Grinder, operating at 7,000 rpm, can be fitted with 1/8, ¼, and ½ in. wide belts for applications with tight spaces. AKC 3 Fillet Weld Grinder features reduction gears and long aluminum neck for metalworking applications. With wraparound angle of at least 180°, ATC 7 Tube Polisher is suited for tubes up to 1 ¾ in. in diameter. Read More

Portable Tools, Machinery & Machining Tools

Die Grinders offer 3 in. or 6 in. shaft for extended reach.

September 4, 2015

Available with front or rear exhaust air motor, .4 Hp Extension Die Grinders run at 25,000 rpm and are suited for work within long pipes, castings, and other places where extended reach is needed. Straight-line air tools include safety-lock lever that prevents accidental start up. To minimize noise in workplace, tools run as low as 72 dB(A). Optional carbide burrs and mounted points enable deburring, grinding, etching, and cleaning. Read More

Machinery & Machining Tools, Portable Tools

Belt Grinding Systems feature mobile handheld design.

July 17, 2015

Set up as portable or stationary grinding stations, Slugger by FEIN GHB 15-50 and GHB 15-50 INOX provide flexible on-site operations. Tools feature grinding platen with 3 1/8 in. surface for grinding and finishing of flat surfaces. Equipped with 1,500 W motor, GHB 15-50 has constant speed of 8,500 rpm for high stock removal rate, while GHB 15-50 INOX has 2,500–7,900 rpm variable speed for grinding and finishing stainless steel. Other features include tool-less belt change and adjustable handle. Read More

Portable Tools

Angle Grinders suit heavy-duty industrial applications.

July 17, 2014

Available with 1.6 and 2.2 hp motor, respectively, Cleco® 1660 and 2260 are compatible with depressed center wheel and cut-off abrasives, including 4, 4.5, 5, 6, and 7 in. Grinders feature all metal housing and dual auxiliary handle positions. Reversible throttle handle and interchangeable guards allow versatility to fit any application. To meet highest safety standards, tools have safety lock throttle lever, industrial governor, and CAGI-compliant guards. Read More

Portable Tools, Machinery & Machining Tools

Durable Vertical Grinders maximize material removal.

May 29, 2014

Built for maximum productivity and material removal, Cleco® Vertical Grinder is suited for heavy metal fabrication process in such industries as shipbuilding, rail, foundry, and infrastructure. System is available with 3 or 4 hp motor with industrial governor and compatible with 6 in. Type 6 and Type 11, 7 in. Type 27, and 9 in. Type 27 industry standard abrasives. Construction includes one-piece, all-metal housing as well as reversible handle and interchangeable guards.
Read More

Portable Tools

Right Angle Grinders deliver maximum material removal.

May 29, 2014

Available in 1.6 hp and 2.2 hp motor options, respectively, Cleco® 1660 and 2260 Angle Grinders are compatible with industry standard depressed center wheel and cut-off abrasives, including 4, 4.5, 5, 6, and 7 in. Units feature streamlined angle head and all metal housing for ruggedness in abusive environments. Dual auxiliary handle positions, reversible throttle handle, and interchangeable guards allow for versatility to fit any application. Read More

Portable Tools, Machinery & Machining Tools

Horizontal Bale Grinder operates virtually dust free.

April 4, 2014

With its ability to feed two 4 x 4 x 8 ft bales side by side, mechanically loaded or semi-automatic G2100-26-400 lets end-users blend 2 different types of material simultaneously. This square bale grinder, which can serve as high-volume pre-grinder or one-step single grinder system down to 1/8 in. screen, consists of bale feed conveyor with dust hood, grinder, screens, and air discharge chute or takeaway conveyor (depending on application and grind size requirements).
Read More

Portable Tools, Machinery & Machining Tools

Air-Powered Pencil Grinder features variable speed design.

January 29, 2014

Providing adjustable speed from 35,000–60,000 rpm, Variable Speed Pencil Grinder offers precision deburring, finishing, and engraving. Tool features non-slip ergonomic grip, one-touch pushbutton for on/off operation, and overhose assembly that helps direct air away from operator. Spindle Lock with through-hole enables quick accessory change with no need for 2 wrenches. Supplied with 1/8 in. collet, grinder accepts carbide burrs and mounted points. Read More

Portable Tools

Grinders combine lightweight design, power, and durability.

November 21, 2013

Respectively rated at 0.7, 0.9, and 1.4 hp, Heritage 216, 236, and 25 Series Grinders are engineered for heavy-use, industrial applications and are available in high-visibility Cleco orange. These material removal products, compatible with industry standard abrasives, feature alloy housing for durability as well as complete parts interchangeability with Series 116, 136, and 15. Read More

Portable Tools, Machinery & Machining Tools

Vertical Sanders and Grinders serve heavy-duty applications.

January 17, 2013

Available in 2 and 3 hp versions, 7 in. Diameter Vertical Depressed Center Wheel Grinders (6,000, 7,200, or 8,500 rpm) and 6 in. Diameter Vertical Cup Wheel Grinder (6,000 rpm) are suited for heavy deburring as well as fast weld and stock removal. Also available in 2 and 3 hp variants, 7 in. Diameter Vertical Disc Sanders run at 6,000, 7,200, or 8,500 rpm and are suited for grinding sheet metal and sanding metal parts, as well as removing mill finish, paint, and rust. Read More

Food Processing & Preparation, Portable Tools

Shaved Ice Machine is intended for smaller applications.

June 23, 2011

Designed for portability and to facilitate cleaning, No. 1886 Sno-Flake measures 22.8 x 20.2 x 10.3 in. and employs ¼ hp, 1,725 rpm motor to cut through ice. This UL- and Sanitation-Listed machine, which can be can be used for rentals, runs on 15 A plug and has LLDPE 3/16 in. thick cabinet that insulates ice for extended service capabilities. Read More

Portable Tools, Machinery & Machining Tools

Concrete Surface Prep Kit combines power, ergonomics, airflow.

April 5, 2011

Suited for large area concrete surface grinding applications, 7 in. Angle Grinder Surface Prep Kit includes W24-230 large angle grinder as well as 7 in. dust control shroud and optional vacuum. Model W24-230, at 15 A, has rated speed of 6,600 rpm and loaded speed of 4,600 rpm and delivers 150 lb-in. of torque and 2,400 W of power. Made from virgin polyurethane, dust control shroud opens to let operators work flush against wall and features molded vacuum ports for vacuum connections. Read More

Portable Tools, Machinery & Machining Tools

Fillet Weld Grinder finishes variety of metals.

January 18, 2011

Weighing 6.6 lb and equipped with Marathon motor, extended nose Model KNSE 12-150 is suitable for finishing and polishing hard-to-access fillet welds typically found on handrails or inside welds or enclosed areas. Unit features double gear reduction, winding protection grid, auto-stop carbon brushes, and thumbwheel for speed preselect. With Vario Tacho Constamatic full-wave electronic speed control, tool's speed is kept nearly constant under any load. Read More

Portable Tools, Machinery & Machining Tools

High Precision Grinder facilitates punch and die maintenance.

November 18, 2010

Available for either Thick Turret or Trumpf style tooling, ValuGrind(TM) grinder features 165 mm dia diamond grinding wheel for optimal punch and die finish, and 1,050 W motor to deliver 4,050 rpm for precise surface finish. Unit has precise grind depth control set at 0.02 mm increments for precise finish and to avoid overgrinding. Measuring 820 x 520 x 675 mm in size, unit can handle thick turret tooling styles including AMX, MT, MTG, MTG Long, MXC, Ultra, and all A through E station sizes. Read More

Portable Tools, Machinery & Machining Tools, Materials & Material Processing

Pipe Sander/Grinder renders weld seams invisible.

November 10, 2010

Suited for use on pipe and hand rails, PIPE-MAX combines weld seam grinding and pipe sanding functionality to produce satin to mirror finishes on stainless steel, aluminum, and other metals. It is powered by 14.5 A, 950-3,500 rpm variable-speed, electric motor, which lets tool deburr, grind, and polish closed as well as open pipe constructions from 3/8-12 in. dia. Weighing 11.25 lb, it offers continuous sanding belt speed and belt tightening adjustments. Read More

Portable Tools, Machinery & Machining Tools

Angle Grinding System features optional vacuum.

April 27, 2010

Suited for grinding small areas and vertical applications, 5 in. Angle Grinder Surface Prep Kit includes WE14-125 Plus variable speed angle grinder and dust control shroud. Small angle grinder is equipped with 12.2 A motor, offering 1,400 W power, 29.2 lb-in torque, and variable, no-load speed of 7,000-10,500 rpm. When used with optional vacuum, such as Metabo ASR 2050, Surface Prep Kit helps protect users from silica dust exposure in accordance with OSHA regulations. Read More

Portable Tools

Compact Angle Grinder offers quick, safe wheel change system.

April 13, 2010

Used for cutting and grinding in mechanical maintenance and metalworking industries, 5 in. W11-125 Quick features tool-less disc changing capability and 9.6 A motor. Ergonomic dual-position side handle and racket grip ensure secure operation and minimize vibration. Weighing 5.8 lb, tool also features spindle lock button, auto-stop carbon brushes, and S-Automatic safety slip clutch. Total power is 1,100 W, torque is 26.9 lb-in., and no-load speed is 10,000 rpm. Read More

Portable Tools, Machinery & Machining Tools, Materials & Material Processing

Concrete Grinding Kit protects against hazardous dust.

April 6, 2010

Intended for use in concrete surface grinding of large areas and floors, 7 in. Angle Grinder Surface Prep Kit includes W23-230 angle grinder and dust control shroud that protects users from harmful debris. Use of optional vacuum protects users from silica dust exposure in accordance with OSHA regulations. Along with 15 A motor, W23-230 features switch with lock-on capability and auto-stop carbon brushes. It offers 2,300 W of power, 150 lb-in. torque, and 6,600 rpm no-load speed. Read More