American Beauty Soldering Tools
Clawson, MI 48017
Aug 02, 2007 Prolonging life of industrial soldering irons, Soldering Iron Maintenance Kits include everything necessary to remove flux residue, contamination, and oxidation that builds up between inside of iron's heating element and surface of tip. Each kit contains spiral brush with ¼ in. hex shank to fit most drills, steel wire brush, and non-woven abrasive pads that wrap around tip's shank. Five kits for servicing 40-550 W soldering irons and complete kit for all sizes are offered.

Weiler Corporation
Cresco, PA 18326 0149
Jun 14, 2007 Engineered to unique requirements, Crimped Wire Wide Face Brushes are dynamically balanced and available in 4 fill densities. Types include hard drawn steel, high-tensile steel, and Type 302 stainless steel wire, with wire diameters from .006-.020 in. Sectional construction enables choice of face width up to 30 in., available in ½ in. increments. Applications include surface finishing of clad materials, conveyor and coil strip cleaning, leak detection, and steel roll coating removal.

Weiler Corporation
Cresco, PA 18326 0149
Mar 07, 2007 Ranging in size from ¾-4 in. with wire or abrasive nylon filament, Bore-Rx(TM) Brushes remove all burrs found at intersecting holes and other internal edges of workpiece, and can also be used for bore finishing applications. Unlike tube brushes, Bore-Rx brushes rotate in both directions and can operate at high speeds. They can be adapted for use in end mill holders or can be mounted using 3/8 in. collets.

Weiler Corporation
Cresco, PA 18326 0149
Oct 18, 2004 Mighty-Mite® Line consists of wheel, cup, and bevel brushes, offered in heat-treated steel and Type 302 stainless steel. Users can choose crimped wire for flexibility and light-duty applications, knot wire for more aggressive brushing action, or encapsulated brushes for maximum aggression on severe applications. Typical applications include roughening surfaces; deburring; cleaning rust, paint and corrosion; weld cleaning; and surface preparation.

Anderson Products
Worcester, MA 01610
May 18, 2004 Anderlon Wheel Brushes suit applications that require control when deburring and finishing metallic and non-metallic surfaces. Unaffected by solvents, acids, and alkalis, nylon filaments are impregnated throughout with abrasive grains to ensure constant exposure during processing. Products are available in composite and metal hub constructions, and disc brushes are available with tufted or monofilament construction.

Allway Tools, Inc.
Bronx, NY 10462
Mar 05, 2004 Models SB319 and SB411 have soft rubber over-molding on structural foam handles, which feature contoured finger grips. Both offer hardened and ground steel scraper ends. Model SB416 has shoe handle style with same ergonomic soft-grip features as above, but without scraper end. Heavy-duty scrub brush SB619 has angled socket that accepts threaded mop stick. All 4 models of solvent-proof wire brushes are packed with tempered steel wire.

Anderson Products
Worcester, MA 01610
Dec 10, 2003 Wheel, cup, end, tube, and strip brushes are filled with high-tensile, oil-tempered steel; stainless steel; brass; and other non-ferrous wires, as well as synthetic and natural fibers. Manufactured in knot and crimped styles, brushes are offered in standard sizes, shapes, and wire diameters; custom-order brushes are also available. Applications include cleaning, deburring, surface finishing, roughening, and edge blending.

Weiler Corporation
Cresco, PA 18326 0149
Sep 02, 2003 Crimped Wire Wide Face Brushes are offered in hard-drawn steel, high-tensile steel, or Type 302 stainless steel wire with wire diameters from .006–.020 in. Face widths are available in increments of ½ in., with max face width of 30 in. Dynamically balanced brushes are suited for tube end deburring, as well as surface finishing of clad materials, conveyor cleaning, coil strip cleaning, leak detection in oil pipelines, and removal of rubber coating from steel rolls.

Weiler Corporation
Cresco, PA 18326 0149
Aug 18, 2003 Stem-mounted brushes are available in heat-treated steel or Type 302 stainless steel for both crimped and knot wire products. Styles include wheel, cup, and end brush configurations made with ¼ in. stems for mounting in tool collets. Dish-shaped, concave brushes are offered for cleaning and deburring off-hand or on drill presses. They are available in steel and stainless steel wire ranging from 1½â€“4 in. in diameter.

Mill-Rose Co., The
Mentor, OH 44060 4805
Oct 25, 2002 Micro/mini brushes are manufactured to exacting tolerances from 0.018 in. dia in materials such as stainless steel, brass, bronze, gold, silver, titanium, and molybdenum. Also manufactured in synthetic fibers (nylon, polyethylene, styrene, Herox®, Tynex®), brushes' bristle materials range in thickness from 0.0025 in. Uniform brush diameters are accurate to ±0.001 in. Brushes are available with or without loop handles, which facilitate turning and handling.

Anderson Products
Worcester, MA 01610
Aug 12, 2002 Wide Face Crimped Wire Wheel brushes are characterized by wide and dense brushing faces. Construction permits brushes to be mounted individually or in groups, to cover more surface area in one pass. Low flexibility provides fast cutting action and long life, while oil tempered crimped wire provides uniform brushing action. Applications include deburring, edge blending, flash removal (rubber and plastic parts), and cleaning and removal of rust.

Anderson Products
Worcester, MA 01610
Jul 15, 2002 Anderbond Crimped Wire Wheel Brushes are produced by encapsulating wire brush material with elastomer. Because brushes do not flare out, aggressive brushing action is achieved with minimum pressure. Applications include: removing rubber from ends of pressure hoses; removing varnish from bearing surface of electrical components; removing insulation coating from electrical wires; and preparing tires for recapping.

Anderson Products
Worcester, MA 01610
May 14, 2002 Available in knotted and crimped wire, Mini-Grinder Cup Brushes are offered in carbon and stainless wire and are adaptable to both light- and heavy-duty brushing applications. Crimped wire Mini-Grinder suits applications where uniformed cleaning is required, as well as for flat brushing and edge cleaning. Knotted wire Mini-Grinder suits weld cleaning, scale removal, and deburring. Mini-Grinder Brush Adapters (standard to metric) are also available.

Abtex Corp.
Dresden, NY 14441-0188
Nov 30, 2001 Bradex® Composite hub fiber abrasive radial wheel brushes have embedded fibers across entire surface of their indestructable cores. This reduces filament breakage and allows filaments to perform consistently throughout wear process. Wheels are well balanced to aid in reducing machine fatigue.