Hybricon Corp.
Ayer, MA 01432
Jul 14, 2005 With average airflow of 450 lfm, 10U rack-mount Extreme Cooling Series RME21XC is capable of cooling 75–100 W boards. Enclosures are available with 21-slot VITA 1.7 VME64x, VXS, or CompactPCI switch fabric backplane. Offered with up to 1,600 W of embedded power, units include provisions for 80 mm rear plug-in modules and transition modules in all 21 slots. Fan speed controller minimizes acoustic noise and provides locked rotor failure detection.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
May 09, 2005 TotalStorage® 2104 Expandable Storage Plus (Exp Plus) 320 is available with 300 Gb and 146 Gb, hot-swappable, Ultra320 SCSI disk drives that operate at 10,000 and 15,000 rpm respectively. Multi-server DS4 model is designed to be rack-mounted, while single-server TS4 is stand-alone tower. Both come with choice of redundant power source or cooling fan. They fit up to 14 drives per enclosure and offer up to 320 MB/sec synchronous data throughput.

Bud Industries, Inc.
Willoughby, OH 44094
Apr 22, 2005 NEMA-rated Series NBB is available in indoor versions made from ABS/PC blended plastic with UL94-5VB flammability rating, and outdoor version made of PC/PBT blended plastic with UL94-VA flammability rating and UV stabilizer. Gasketed front doors feature non-metallic hinges and latches for corrosion resistance. Threaded brass inserts in selected internal and external mounting bosses allow for repeated fastening. Sizes range from 5.1 x 3.9 x 2.75 in. to 28.9 x 21.0 x 9.9 in.

Frommelt Products Corp.
Milwaukee, WI 53224 9520
Apr 20, 2005 CAP-TURE, available as modular components or platform-complete cell, comes with roll-down safety interlocking doors, fencing or fixed panels, fume hood, fume exhaust, and controls. Modular design facilitates relocation in plants and accommodates any loading style of parts. Platforms can be custom-designed with required hole dimensions to mount robot or for tooling, and fabric choices capture exhaust and provide protection from sparks and flash.

VIDEOTEC
Schio   Italy
Apr 19, 2005 Constructed of AISI316 polished stainless steel, NXL housing enables installation of motorized lenses in outdoor environment. It is rated to IP67 weatherproof standard and can be equipped with wiper. To provide complete positioning system, unit can be installed on company's NXPTH stainless steel P&T. Such system can be installed in coastline control projects or in aggressive environment atmospheres.

Harting KGaA
  Germany
Apr 14, 2005 Han®-Port provides ability to connect external devices, such as laptops or PCs, for set-up, programming and error diagnosis of industrial installations directly at control cabinet without opening cabinet door. Zinc die cast frames are equipped with transparent covers, while locking system protects against accidental opening. Modular design allows combination of different inserts for power and signals.

Bussmann Div., Cooper Industries
St. Louis, MO 63178
Apr 01, 2005 UL Listed and CSA Certified Bussmann® Safety Module™ with easyID™ window enables maintenance personnel to identify open fuses without opening enclosure. Offering range covering 1–100 A applications, unit features CUBEFuse™ finger-safe, time-delay, current-limiting fuses, and rejection kits are available to prevent overfusing 30 A and 60 A circuits. Modules are available in NEMA 1, 3R, 12 and 4X enclosure styles.

Hybricon Corp.
Ayer, MA 01432
Mar 31, 2005 Featuring stackable design for vertically mounted cards, 10U Series RME1021M cool extremely dense CPU and DSP boards. Dual DC impellers powered by dedicated power supply output provide 16.1 cfm per slot. Included are front and rear cover panels with honeycomb inlet and exhaust, and provisions for shielded connectors for I/O. Enclosures are available with 21-slot CompactPCI®, VME64x, VME, or VXS backplanes and up to 2,400 W of embedded power.

Weidmuller, Inc.
Richmond, VA 23236
Mar 28, 2005 To address global issue of ATEX certification, Ex-range of enclosures and terminals are designed and certified for use in Zone 0, 1, and 2 environments. Units support whatever internal wire termination method is required, including screw connection, tension-clamp, and insulation displacement. Enclosures can be milled, drilled, painted, and assembled to customer's exact specifications.

Hilliard, E.C., Corp.
Franklin, MA 02038
Mar 25, 2005 Specialty Metal Enclosures can be fabricated from stainless steel, sheet metal, aluminum, and titanium in sizes up to 12 ft. With tolerances to ±0.005 in. and ±0.5° on angles, products are offered with finishes such as chromate, iridite, and powder coatings. Chassis, brackets, panels, racks, hinges, and other components are also available. Typical enclosures are fabricated for medical, industrial, and laboratory equipment.

Quest Technologies Inc.
Oconomowoc, WI 53066 4828
Mar 24, 2005 Resistant to chemicals and particulate, Outdoor Measurement System Conversion Kit for SoundPro DLX Hand Held Sound Level Meter facilitates capture of environmental noise data. Weatherproof case provides environmental protection, and battery provides power for up to one week of continuous operation. To protect against theft and vandalism, design enables use of padlocks and cables to secure unit to stationary object.

Bud Industries, Inc.
Willoughby, OH 44094
Mar 10, 2005 Seismic Racks feature open frame construction with 4 adjustable 19 in. panel width mounting rails. Welded, reinforced steel racks are tested and certified to Telcordia's Zone 4 requirements for 1,200 lb equipment load. There are four 4 in. dia cable access holes in top of rack and one 9.5 in. square cable access hole in bottom. Available panel space is 19 x 78.75 in., and overall rack size is 84.06 x 26.06 x 32.75 in.

Wiremold Co., The
West Hartford, CT 06110
Feb 23, 2005 Non-metallic enclosure allows wireless access point to be placed on any wall surface. Combining accessibility with concealed key lock for security, unit supports various access point designs and mounting straps enable access point to be positioned vertically or horizontally. Communications cabling can be fed from wall directly into back of enclosure, and twist-outs accommodate Eclipse™ Series Workstation Raceway where backfeeding is not possible.

Eurobex Mfg. Ltd.
Blainville, QC J7C 5E2  Canada
Dec 14, 2004 Series 5412 ESTH thermally insulated electrical enclosures are available in sizes ranging from 12 x 12 x 6 in. to 72 x 30 x 24 in. NEMA 4/12 enclosures feature poured-in-place gaskets, quarter-turn locks, and incorporated drip shields. Held in place by steel brackets, ¾ in. aluminum foil faced insulation panels are installed on all faces, including door. Rigid polyisocyanurate foam insulation is rated R5.

Arsco Mfg., Co.
Cincinnati, OH 45247 5160
Dec 03, 2004 Designed to precisely control heat flow, Radiator Enclosures direct warm air to comfort zone of room, minimizing ceiling airflow. Cold air is directed back to radiator for re-warming in channel pattern. Units help prevent heat from being absorbed by outside walls and protect occupants and visitors from direct contact with hot radiators. Available in 6 colors and 3 grill styles, enclosures are powder-coated for scratch and fade resistance.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Nov 01, 2004 TotalStorage® DS4100 Model 1SC is single controller offering based on 2 Gbps Fibre Channel technology that enables RAID-protected storage, SAN attachment, and scalable capacity. It includes three 250 GB Serial Advanced Technology Attachment (SATA) disk drives. Storage Expansion enclosure EXP100 model 1724-1XP supports 14 dual-ported DS4000 250 GB SATA disk modules. It offers up to 3.5 TB capacity in 3U, 19 in., rack-mount enclosure.

Stahlin Enclosures
Belding, MI 48809
Oct 28, 2004 Equipped with polycarbonate cover for open view, J Series square profile enclosures are available in all configurations, including raised cover option. Products, molded from SolarGuard™ material formulation for protection from UV degradation, are offered with submersible ratings up to NEMA 6P. SolarGuard features double-protection formulation technology and NPG isopthalic-based resin system that ensures UL 94 5V fire retardancy and weather resistance.

Stahlin Enclosures
Belding, MI 48809
Oct 20, 2004 Series J Non-Metallic Enclosures are available with clear polycarbonate covers in sizes 8 x 8 and 12 x 12 in. Covers are suited for users that require full view of controls inside without inconvenience of having to open enclosure.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Oct 13, 2004 TotalStorage® DS4000 EXP710 Fibre Channel Storage Expansion Unit, available for DS4000 Midrange Disk Systems, provides 14-bay, 2 Gbps, rack-mountable Fibre Channel drive enclosure. Utilizing internal switch technology to attach to each disk drive within EXP710 enclosure, product can scale to 2+ TB of disk storage capacity per 3U enclosure. Unit supports various 10,000 and 15,000 rpm Fibre Channel drive module options.

Buckeye ShapeForm
Columbus, OH 43207
Oct 12, 2004 Available in desktop or 19 in. rack-mount models, Series BMX/BMU features concealed fasteners, extruded aluminum side panels, and vinyl-clad top and bottom panels that wrap around units. Holes are pre-punched in side panels for attachment of components or internal chassis. Optional 3U internal card rack accepts 100, 160 and 220 mm cards/DIN 41612 connectors. Accessories include carry handles, feet, tilt stands, cord retainers, and internal mounting chassis.