EIC Solutions, Inc.    Warminster, PA 18974-1157
May 23, 2013 Weather-tight EIC air-conditioned electronic enclosures, built to NEMA standards, are available with NEMA 4-rated, fully programmable digital temperature control (DTC). Operating with tolerance of ±1°F via use of proportional-integral-derivative (PID) control scheme, DTCs enable end-user to control internal enclosure environments over specific temperature ranges and time periods as well as factor in such variables as heat load fluctuations and power consumption.

ITW Vortec    Cincinnati, OH 45242-4719
May 16, 2013 Providing protection for electrical and electronic components, Vortex A/C Enclosure Cooler models 7770, 7670, and 7570 offer 5,000 BTU/hr cooling capacity and employ 2-stage cooling system that helps conserve compressed air. Only first cooling stage is used during regular usage, but second cooling stage is activated when cooling demand increases. Additionally, model 7570 is designed for hazardous locations and UL Classified for use in Class I, Div 2; Class II, Div 2; and Class III areas.

POLYCASE    Avon, OH 44011
May 14, 2013 WA, WC, and WP Series, available in sizes from 2.28 x 2.52 in. to 14.12 x 7.84 in. for indoor and outdoor applications, feature silicone rubber gasket and stainless steel screws that protect electronics from harsh environmental factors such as dust, dirt, and moisture. Molded in flame retardant UV-stabilized Polycarbonate plastic, WC and WP Series are conducive to temperatures from -40 to +120°C. WA Series, molded in flame retardant dark gray ABS plastic, suits indoor use from 0 to +80°C.

Adalet    Cleveland, OH 44135 3301
May 07, 2013 Resistant to corrosion, XIHNS rugged instrument enclosure features 4 1/16 in. throat opening, allowing it to accommodate variety of instruments and devices. Removable, internal mounting pan aids in device installation. There are three ¾ in. NPT conduit entries (up to 6 optionally) and 2 cast-on mounting tabs included. Enclosure's glass cover has viewing window of 3.31 in., while front boss supports optional mounting bracket holes or conduit entry up to 1 in. NPT.

EIC Solutions, Inc.    Warminster, PA 18974-1157
Apr 30, 2013 Protecting electronic gear from environmental hazards, theft, and vandalism, wall- and pole-mount models of DVR Cooler are built to NEMA standards, feature powder coated steel construction, and may be fitted with 200, 400, 800, or 1,500 BTU thermoelectric air conditioner. Integrated bracket allows 19 in. rack-mountable DVRs to fit into standard wall-mount enclosure. Available sizes include 24 x 24 in., 30 x 24 in., 36 x 30 in., and 48 x 30 in.

Adalet    Cleveland, OH 44135 3301
Apr 30, 2013 Made of 316 investment cast, stainless steel for applications where severe corrosion exists, XIHNS Series features large bored throat opening of 4 1/16 in. for variety of OEM instruments and devices. Units offer three ¾ in. NPT conduit entries as standard, but are available with up to 6 entries. Two solid cover and 2 glass cover options accommodate various depth instruments. Offering 3.31 in. viewing window, glass cover features tab-free retaining ring for maximum instrument clearance.

POLYCASE    Avon, OH 44011
Apr 26, 2013 Designed for outdoor applications, ML Series NEMA 4X Enclosures include 0.06 in. thick aluminum panels that assemble directly to mounting bosses inside base. UL 508A Listed units are molded in light gray UV-stabilized polycarbonate with clear, distortion-free polycarbonate cover option and form-fitting silicone gasket that protects internal electronic components from dust, dirt, and water. Featuring flame rating of UL94V-0, enclosures are conducive to temperature ranges of -40 to 120°C.

Semi-Gas Systems, Inc.    San Jose, CA 95112
Mar 26, 2013 Intended for low-volume or space-constricted applications, 69 x 32 x 27 in. Xturion™ MGE-X™ includes 2 separate compartments, each designed for process and purge cylinder, and also comes in single source design with one empty compartment for expansion. Adjustable steel shelves and cylinder straps as well as adjustable exhaust ducts promote flexibility. Along with GigaGuard™ GSM controller, features include 4.3 in. color touchscreen and welded 11 Ga steel enclosure.

POLYCASE    Avon, OH 44011
Mar 20, 2013 Offered in 3 styles and 5 sizes from 5.11 x 3.93 x 2.75 in. to 11.81 x 7.87 x 6.29 in., WH Series supports 0.06 in. thick aluminum mounting panels that attach directly to mounting bosses inside base using included screws. Panels let electrical engineers mount hardware inside enclosure without puncturing exterior, maintaining NEMA 4X rating of box. Hinged cover is standard, and panels can feature cutouts, including threaded holes, per customer specifications.

Bud Industries, Inc.    Willoughby, OH 44094
Mar 11, 2013 Measuring 3.62 x 2.60 x 1.10 in., FBB-3665 Enclosure is designed for KL25Z Freescale Freedom Development Platform. Board slips into place, secured in enclosure by snug fit rather than by potentially damaging hardware. Cutouts in front panel allow for connection to board's 2 USB ports and provide access to reset button, while round knockout plugs in rear accommodate optional miniature cable gland. Slot on each side of enclosure accommodates flat cables from I/O header banks.

OKW Enclosures, Inc    Bridgeville, PA 15017
Feb 12, 2013 Ergonomically contoured to be comfortable to hold or wear, 3.22 x 2.20 x 0.94 in. ERGO-CASE XS models are molded in ABS (UL 94 HB), with intermediate ring in soft-touch TPE elastomer, and are suited for compact, handheld electronic devices. Cases can be specified with eyelet in end for carrying it on lanyard or 2 lateral eyelets for fitting device to wrist strap or belt. Screw pillars in top section and location pillars in base section are provided for fitting PCBs and battery assemblies.

Zoneworks    Milwaukee, WI 53223
Feb 05, 2013 Designed to enclose compactors and dumpsters at loading dock, CE Series helps maintain consistent temperature and humidity levels inside facility, while keeping wind and inclement weather out. Construction consists of steel framework, insulated curtain wall panels, and corrugated steel roof with skylight. Multi-layered insulated panels have 18 oz, industrial vinyl fabric surrounding anti-microbial polyester batting. Through magnetic access openings on both sides, exterior access is possible.

POLYCASE    Avon, OH 44011
Feb 01, 2013 Molded from black flame-retardant ABS plastic with flame rating of UL94-5VA, Model XR-34 is available with or without surface mounting flanges. Flanges feature round holes for permanent mounting and keyholes for temporary mounting. Screw-on cover hosts recessed center, suitable for membrane keypads or graphic overlays, with user's choice of textured or smooth finish. In addition, PC board mounting bosses in base of enclosure are standard.

OKW Enclosures, Inc    Bridgeville, PA 15017
Jan 09, 2013 Available in 16 sizes with external dimensions ranging from 3.30 x 3.22 x 2.16 in. to 11.89 x 9.13 x 4.33 in., IN-BOX Enclosures are rated IP66, IP67, and NEMA 4X. ABS models are impact-rated to IK07, while polycarbonate models are rated to IK08. Mounted by quick action stainless steel locking screws, all lids have recess for mounting large membrane keypad or product label. Applications include digital and analog instrumentation, sensors, interfaces, and security systems.

Oberon, Inc    State College, PA 16801
Dec 18, 2012 Measuring 2 x 2 ft, Model 1074 is UL-listed for use in plenum space and has openings in locking door for up to 3 external 802.11 Wi-Fi or cellular/PCS multi-carrier antennas. Multimedia gateway is inserted into clear plastic dome in enclosure door, and is powered, network-connected, and plugged into door-mounted projector with short HDMI cable. Door is closed and locked, securing equipment in ceiling and providing communication between multimedia gateway and those devices connecting to it.

FSR Metal Products    West Paterson, NJ 07424
Dec 17, 2012 Intended for classrooms, boardrooms, and meeting rooms, Cool Overhead Rack Enclosure (CORE) products include Ceiling Box and Top Shelf units. Ceiling Box products install in 2 x 2 ft or 2 x 4 ft drop ceilings and provide 2 ½–4 full rack spaces for equipment mounting. Providing 4 RU mounting space, Top Shelf rack mounts to wall just below ceiling and features plastic cover that lets RF and WiFi signals pass unobstructed between equipment and room.

EIC Solutions, Inc.    Warminster, PA 18974-1157
Dec 10, 2012 Fully integrated into EIC Thermoelectric Air Conditioners used in EIC electronic/electrical enclosures, heating option assures protection of devices that are sensitive not only to heat and cold, but also to condensation and resulting danger of corrosion. Heating function is automatically activated when internal temperature of enclosure falls below 45°F and shuts off at 55°F. UL recognized and CSA Certified, heater is controlled by independent thermostat and requires no adjustments.

Simco Plastic Enclosures    Avon Park, FL 33826
Dec 10, 2012 Intended for electrical and electronic applications, 2 x 2 x ¾ in. press-together box has molded top and bottom that fit together snugly as to eliminate need for screws. Top and bottom may be glued or ultrasonically welded together for permanent closure, or halves can also be separated and used as potting boxes by pouring encapsulating liquid over installed component. With exterior lightly textured to resist scratches and scuffing, enclosure comes in ABS plastic or UL-rated materials.

FSR Metal Products    West Paterson, NJ 07424
Dec 05, 2012 Mounted to wall close to ceiling in locations without drop ceilings or where space above drop ceiling is limited, Top Shelf provides unobtrusive and secure enclosure with which to hold up to 4U of audio, video, and network equipment. Multiple mounting locations for power as well as signal connections facilitate installation, steel frame ensures secure equipment mounting, and plastic cover allows wireless signals to pass in and out of enclosure unobstructed.

Pixus Technologies    Waterloo, ON N2V 1C5
Dec 03, 2012 Offered as 19 in. rackmount or desktop enclosure, High-CFM 1U SlimBox holds 2-slot 0.8 in. pitch CompactPCI, VME/VME64x, OpenVPX, or custom backplane mounted horizontally. Enclosure features push-pull cooling configuration with 7 fans for over 115 cfm of airflow. Fans come in separately removable fan trays to facilitate replacement/swapping. Depending on chassis size, SlimBox line offers range of power supply options in pluggable, fixed, N+1, or redundant power configurations.