CIP Technologies
Ipswich   United Kingdom
Sep 28, 2009 Model R-SOA-EAM-1550 monolithically integrates semiconductor optical amplifier with reflective electro-absorption modulator, combining high optical gain with high-speed modulation. Unit also offers low sensitivity to input polarization, suiting it for DWDM transmission at speeds of 10 Gbps over fiber optic links of up to 80 km. It can be used across entire C-band and is compatible with HyBoard® photonic integration platform.

CIP Technologies
Ipswich   United Kingdom
Sep 24, 2009 SOA-R-OEC-1550-CO high signal gain reflective semiconductor optical amplifier is coaxially packaged in pigtailed TO-56 can and is capable of uncooled operation over extended temperature range, making it suitable for applications including sensor networks and WDM-PONs. It uses buried InP heterostructure design and offers over 20 dB of signal gain across C-band at temperatures up to 70°C. Device also incorporates monitor photodiode.

Clearfield, Inc.
Plymouth, MN 55442
Aug 07, 2009 Intended for 1,550 nm optical transmission networks, WaveSmart PowerNode 1550 EDFA offers custom wavelengths and user-defined power output levels for distribution of optical signals. Internal microprocessor provides real-time monitoring and control for operating status of pump and I/O optical power. Warning information will be generated in case of amplifier failure and in critical condition, pump laser will be automatically switched off when no optical power is available.

Avago Technologies
San Jose, CA 95131
Oct 14, 2008 Supplied in auto-insertable stretched SO-8 package, ACPL-C78x series delivers working insulation voltage to 1,140 V and meets 8 mm creepage and clearance requirements. Products use sigma-delta ADC technology to let designers accurately measure motor phase currents in servo and high-end inverter motor drives. Common-mode rejection (15 kV/µs at VCM = 1,000 V) capability provides precision and stability needed to accurately monitor motor current in high-noise motor control environments.

Bookham, Inc.
San Jose, CA 95134
Sep 18, 2008 Enabled by Mini-DIL un-cooled 980 nm pump module, MiNi Block(TM) u7040 targets 40 Gb/s transport systems in which low-noise optical amplification is required for each channel before 40 Gb/s receiver. Unit offers output power up to 15 dBm and produces 1.2 W thermal dissipation. Available in semi-custom variants to meet specific requirements, amplifier is built using telecom-grade 125 µ fiber and 12-way electrical connector.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
May 14, 2007 Designed to amplify photodiode signals from fiber optic cables in ONET, Model LOG114 operates on single +5 or ±5 V dual supply over temperature range of -5 to +75°C. DC precision product features 1 µsec rise and fall time, and can handle 8 decades of dynamic range (equivalent to 27 bits, 100 pA to 10 mA input) that suits laser control systems. Available in 4 x 4 mm QFN-16 package, unit can be used for industrial/medical optical density/absorbance measurements.

Avanex Corp.
Fremont, CA 94538
Oct 17, 2006 PureGain(TM) Optical Amplifier module combines Erbium Doped Fiber Amplification with Optical Performance Monitoring (EDFA-OPM) capabilities. Providing automatic and remote EDFA control in single module, integrated product offers self-compensating solution that maintains backwards-compatible electrical and mechanical configurations to promote future network upgrades. Uses include next-generation networks targeting delivery of high-bandwidth triple play services.

Avanex Corp.
Fremont, CA 94538
May 15, 2006 Ultra-thin PureGain 400 erbium doped fiber amplifier module is designed to work within stringent space constraints found in transponder and line card applications. It can be used in pre-amp configuration, which enables high receiver sensitivity without trans-impedance amplifier, or booster configuration, which enables high launch power in advanced transmitter designs. Utilizing standard optical components, amplifier is compatible with Telcordia requirements.

Avanex Corp.
Fremont, CA 94538
Mar 28, 2006 Enabling field upgrades or healing stressed links, fully integrated PureGain(TM) 200 Hot-Pluggable EDFA includes controls with alarm set-point management, and command line interface that is compatible with PureGain product line. Up to 8 EDFAs can be integrated in standard, high-port-density chassis. Transmitters and receivers can be interchanged in same Xenpak bay, enabling flexible design and minimized inventory.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Feb 10, 2004 OPerAâ„¢ is a low noise, femtosecond OPA that extends wavelength range of Ti:Sapphire kilohertz amplifiers from UV through mid-IR. Standard unit tunes from 1,150-2,900 nm, while Opera-VIS adds output from 400-1,150 nm, and Opera-UV adds output from less than 300-400 nm. A 1.0 mJ of pump energy produces more than 0.1 mJ signal and more than 0.05 mJ idler beams. OPerA is suited for femtosecond spectroscopy and nonlinear optic applications.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Jan 08, 2004 Libraâ„¢ regenerative amplifier consists of femtosecond laser system that combines on-board diagnostics, seed laser-to-OPA computer interface, and hands-off operation in compact, one-box package. Integrated design incorporates Vitesseâ„¢ as seed laser and Evolution-15 as pump laser. Unit delivers 1 W of 800 nm output at repetition rates of 1 or 5 kHz. It also pumps multiple optical parametric amplifiers, providing wavelength tunability from deep-UV to mid-IR.

Fairchild Semiconductor
South Portland, ME 04106
Jul 03, 2003 Model FOD2742 Optically Isolated Error Amplifier features tolerance as low as 0.5%. It incorporates optocoupler, precision reference, and error amplifier into 8-pin SOIC package. Unit provides isolated voltage feedback between secondary and primary sides of power conversion circuits for control and regulation purposes. Reference voltage tolerances include 0.5, 1, and 2%. Model FOD2742 has UL, CSA, VDE, and BSI safety agency certification.

Communications Specialties, Inc.
Hauppauge, NY 11788
May 27, 2003 Pure Digital Fiberlink® 8000 and 8100 Series transmit 1–4 and 2–12 channels, respectively, of any combination of video, audio, and data signals from one-way Pure Digital Fiberlink Transmitters. They transmit to multiple one-way Pure Digital Fiberlink Receivers without degradation to quality of original baseband signals. Both series can receive signals over multimode or single mode fiber at wavelengths of 850, 1310, or 1550 nm.

NP Photonics, Inc.
Tucson, AZ 85747
Sep 09, 2002 Scorpion Amplet MMP-HP7020 high-gain, low-noise amplifier module has 16 dB of total output power and provides up to 20 dB of gain across C-Band, while generating less than 5.5 dB of noise. Suitable for in-line metro and access applications, it offsets signal loss created by DWDM and optical conditioning devices. It has MSA-compliant footprint of 90 x 70 x 12 mm, and complies with Telcordia GR-1312.