New Amplifiers Products

TTL Amplifier meets MIL-STD-883 standard.

Featuring customizable design, 10 W Model MSH-4627908-TTL is optimized for operating frequency range of 5.2–5.8 GHz with 28 dB min of gain and 6 A max fully matched to 50 Ω. Unit provides fast blanking and is manufactured in compliance with AS9100. Available with mounting plate, amplifier is suited for test systems as well as aerospace and defense applications.

Low-Noise MMIC Amplifiers meet MIL requirements.

Utilizing E-PHEMT technology, CMA Series is tested to meet MIL requirements for gross leak, fine leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL. Units are housed in 3 x 3 x 1.4 mm ceramic cases that are hermetically sealed and nitrogen filled. Offering thermal performance of -55 to +105Ã-

Coaxial Amplifier offers flat gain and high dynamic range.

SupportingÃ- use inÃ- various applications, ZX60-100VH+ is supplied in miniature shielded rugged case and delivers signals from 300 kHz to 100 MHz at up to 30 dBm output power. This 36 dB coaxial amplifier, operating onÃ- single +12 V supply, exhibits gain flatness of Ã-

Ultra-Low Noise Amplifier features noise figure of 1.3 dB.

Housed in 3 x 3 mm QFN plastic surface mount package, 5–11 GHz Model CMD132P3 delivers greater than 20 dB of gain across entire bandwidth, and has corresponding output 1 dB compression point of +10 dBm. RoHS-compliant device requires single supply voltage of +3.6 V at 30 mA. In addition toÃ- microwave radios and C- and X-band applications, amplifier is suitable for point-to-point radios,...

You're Gonna Need a Bigger Boot

Learn about sealing boot types and applications in marine environments.

Small-Cell Power Amplifier covers frequencies from 728-768 MHz.

Leveraging InGaP-Plus™ technology, AWB7224 small-cell power amplifier (PA) provides characteristics optimized for WCDMA, HSPA, and LTE small-cell base stations operating in 728–768 MHz band. Efficiency rating of 13% minimizes power requirements and promotes flexible network power systems selection. Supplied in 7 x 7 x 1.3 mm SMT package with integrated RF matching, PA offers linearity of -47...

MMIC Power Amplifier serves high-power broadband applications.

Operating from 500 MHz to 3.0 GHz frequency range, MAAP-010168 is fully matched for input and output at 50 Ω, which eliminates need for sensitive external RF tuning components. This 10 W, 2-stage amplifier, fabricated using high-reliability pHEMT process, providesÃ- nominal gain of 24 dB with input and output return loss of 10 dB acrossÃ- frequency band. Features suit RF and microwave...

Low Noise Amplifier supports X-Band applications.

Housed in 3 x 3 mm PQFN surface mount package, MAAL-010528 GaAs MMIC LNA provides nominal gain of 20 dB, OIP3 linearity of 26 dBm, and mid-band noise figure supply of 1.6 dB over 8.0–12.0 GHz frequency band. Unit features self-bias architecture which requires user to apply only single positive supply. Internally matched to 50 Ω input/output, 60 mA amplifier is suited for V-Sat, radar, and...

Fiber Optic Amplifier optimizes flexibility via programmability.

Programmable for range of applications and conditions, DF-G1 Expert simultaneously shows signal level and threshold via 2 digital displays. TEACH and SET methods let users modify response time, signal level, and sensitivity. This flexibility lets unit support diverse sensing requirements, including low contrast situations, small object detection, and parts in place verification. Sensing output is...

High-Speed Power Amp controls high-voltage outputs.

Featuring 4-quadrant, active output stage, Model 10/10B-HS provides high-speed response with slew rate greater than 700 V/Ã-µsec, output current to 40 mA peak AC, and signal bandwidth of DC to greater than 19.5 kHz (-3 dB). Solid-state product is configured as non-inverting amplifier with fixed gain of 1,000 V/V. It provides precise control of output voltages from 0 to Ã-

The Innovation Leader in Cellular Amplifiers, Cellphone-Mate Inc., Ships First and Only FCC Approved 4G/AWS Amplifier

Reconfigurable AWS amplifier boosts the range and reception on calls on the AWS band. FREMONT, Calif. - Cellphone-Mate Inc., one of the leading providers of cell phone amplifiers and accessories, today announced that they are now shipping the industry's first and only aftermarket FCC Approved 4G/AWS (Advanced Wireless Service) band bidirectional amplifier, the SureCall(TM) CM2100 62db. Designed...

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.