Other

Electrical Equipment & Systems, Mounting & Attaching Products

Analytic Systems introduces Ideal Multi-Bank Battery Isolator for 2 and 3 bank battery systems

November 6, 2015

Delta, BC, Canada – Analytic Systems introduces the IBI (Ideal Battery Isolator) for 2 bank and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical isolation between the battery banks. Ideal Diode technology reduces the voltage drop across the Isolator to a mere 160 millivolts even at 200 Amps of charging current so all... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Latching Circulator-Isolator offers 1 µs switching speed.

June 2, 2015

Covering bandwidths across 16–35 GHz range, Ka-Band Dual-Junction Latching Circulator-Isolator is suitable for satellite communications links, commercial aviation systems, missile systems, and other high-rel aerospace applications. Unit offers low insertion loss of 0.2 dB in transmit mode and 0.4 dB in receive mode. Device will handle +39 dBm transmit power with 25 dB isolation to protect receiver while transmitting, and is well matched with 25 dB return loss and better than -60 dBc RF leakage. Read More

Mounting & Attaching Products

Bearing Isolator provides permanent bearing protection.

August 13, 2014

With 0.375 in. overall length, IP66-rated mini66 Bearing Isolator protects against both water and dust ingress on applications with very limited space. Non-contacting, non-wearing design continues to protect against contamination ingress and lubrication loss over time. All designs are custom engineered to meet exact requirements of application and operating environment and can be manufactured in bronze or stainless steel. Read More

Architectural and Civil Engineering Products, Mounting & Attaching Products

Shake, Rattle and Roll: Construction Specialties Showcases Its Expertise at National Building Museum: Designing for Disaster Exhibition

May 13, 2014

Doors Open May 11: Exhibition Explores Natural Hazard Risks and Mitigation Strategies MUNCY, Pa. - Construction Specialties, Inc. (C/S), a leading manufacturer of high-performance commercial building products, will be featured at the National Building Museum multimedia exhibition, Designing for Disaster, a call-to-action for citizens from design professionals and local decision makers to... Read More

Mounting & Attaching Products, Services, Test & Measuring Instruments, Green & Clean

MTS Seismic Simulation System Helps Japanese Company Prepare for Next Major Earthquake

April 22, 2013

EDEN PRAIRIE, Minn.– MTS Systems Corporation (NASDAQ: MTSC), a leading global supplier of high-performance test systems and position sensors, today announced it has developed the world's most advanced, large-scale, privately owned seismic test system for Kajima Corporation Technical Research in Tokyo, Japan. This massive custom MTS seismic system, referred to as the W-DECKER®, was... Read More

Health, Medical and Dental Supplies & Equipment, Laboratory and Research Supplies & Equipment, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Test & Measuring Instruments

Bosch Presents Highlights from Processing, Inspection, and Isolator Technology

February 11, 2013

Equipment for solid and liquid pharmaceuticals<4444>· Tablets: mixing, granulating, pressing and coating on a laboratory scale · Compact inspection unit KKX 3900 for capsules · Fast Air Lock ISS 100: quick transfer into and out of isolators<4444>At TechnoPharm 2013 in Nuremberg, Germany (hall 6, booth 235),... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Material Handling & Storage, Mounting & Attaching Products, Optics & Photonics

Gould Fiber Optics: Expanding Its Product Portfolio of Micro Optic Components to Now Offer Low Wavelength and High Power Options

January 23, 2013

Millersville, MD, USA - Gould Fiber Optics, a leading worldwide manufacturer and supplier of premium passive fiber optic, planar components and integrated modules, is expanding its product portfolio of isolators, circulators and polarizers. These expanded product lines now feature high power and low wavelength options in addition to our current line of reliable Micro Optic components.... Read More

Material Handling & Storage, Mounting & Attaching Products

Single Support Pipe Stands provide seismic and wind restraint.

September 17, 2012

Stabilizing run of gas or liquid service piping by hard-clamping it to adjustable steel mounting plate, Model KSPS stands meet IBC/OBC/NBCC building code requirements and can used inside structure or on rooftop. Stands are fabricated from engineered steel tube welded to steel base plate that can be welded, bolted, or anchored to building structure. Adjustable, rigid frame maintains pipe at proper height and alignment. Three configurations support and restrain pipe from 1 ¼–5 in. Read More

Mounting & Attaching Products

Earthquake Restraint System secures optical tables.

May 14, 2012

Rated for seismic forces generated by maximum of 2,000 lb of combined table and payload weight, Model ERS2010 restricts motion of pneumatically isolated optical table tops during seismic activity. Minimum of 3 restraints is required to prevent possible tipping, and system does not affect optical table performance. Available in several standard and custom heights, system is certified and in compliance with 2009 International Building Code (IBC) and 2010 California Building Code (CBC). Read More

Health, Medical and Dental Supplies & Equipment, Material Handling & Storage, Mounting & Attaching Products, Packaging Equipment, Services

Bosch Packaging Technology Presents New Developments for Liquid and Solid Pharmaceuticals

May 1, 2012

  • Entire process chain for solid pharmaceuticals on show
  • Inspection technology from standard to high-end and x-ray inspection
  • 100th isolator sold with FLC filling and sealing line<4444>At Achema 2012 in Frankfurt/Main, Germany, Bosch Packaging Technology exhibits its innovations at three interconnected booths. The company highlights the sale of its 100th isolator and the... Read More

  • Electrical Equipment & Systems, Mounting & Attaching Products

    QuakeLoc Seismic Cable Restraint Systems from Kinetics Noise Control

    November 9, 2011

    Kinetics Noise Control Inc. Dublin, OH, is proud to introduce a new line of seismic cable restraint products featuring our patented QuakeLoc connector. The QuakeLoc connector is made in the United States and meets latest IBC building code requirements. Detailed product information, time study and installation videos available at http://www.kineticsnoise.com/quakeloc.<4444>About Kinetics Noise... Read More

    Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

    Protect Your PC from Harmful Voltage Coming through the USB Cable

    May 23, 2011

    The USB Isolator will also increase your system stability.<4444>CALGARY, Alberta- Phidgets Inc. released today the 3060 - USB Isolator which protects your PC from harmful voltage (up to 1kV) that can flow from devices attached to your PC through the USB cable.<4444>" Customers have been asking for USB isolation for quite a while and we decided to make a separate isolator board instead of adding... Read More

    Mounting & Attaching Products

    Battery Isolators eliminate multiple battery drain.

    February 11, 2011

    Battery isolators ensure that when vehicles and equipment have 2 batteries, one for starting engine and another for powering accessories, latter does not drain power from former. Suited for transportation and off-road vehicle and equipment applications, products act as check valve between multiple batteries that are set up parallel with each other. No matter how drained accessory battery becomes, isolator ensures there is always enough power to start engine. Read More

    Electrical Equipment & Systems, Mounting & Attaching Products

    USB Isolator shields host PC and connected devices from surges.

    October 19, 2010

    Inserted in-line with USB connection, industrial-rated USB-Isolator provides 1,500 Vac/2,100 Vdc isolation for USB 2.0 or 1.1 connections from computers to USB devices. Unit protects against over-voltage conditions caused by electrical surges and transient voltage spikes up to 8 kV. LED indicates that power is being received and will blink if connected device tries to draw more than 120 mA. Housed in 1 x 2.5 x 2 in. package, isolator also includes common mode filtering and short circuit protection. Read More

    Electrical Equipment & Systems, Mounting & Attaching Products

    Alternator Power Distribution System targets marine engines.

    October 4, 2010

    ProIsoCharge zero-volt-loss battery isolator digitally controls power distribution of boat's engine alternator while protecting integrity of main engine start battery. Able to charge up to 3 battery banks from single alternator, it allows boaters to charge batteries and use alternator's output to power onboard marine electronics while cruising. Status display features warning LEDs that illustrate high and low alternator output, over-voltage protection, and high voltage conditions. Read More

    Material Handling & Storage, Mounting & Attaching Products

    Mechanical Clamp is intended for seismic bracing.

    May 13, 2009

    Fast Clamp attachment offers 12 in. of overall adjustment, allowing rough-in style installation and eliminating cut length guess work. Fast Attach yoke design facilitates installation to multiple hanger rod sizes, reducing inventory needs for any particular job. While Figure 985 fits trapeze-style hangers or single pipe hangers and comes in 3/8-5/8 in. and ¾-7/8 in. hanger rod sizes, Figure 986 is offered in standard ½ in. rod size and designed to be upper or structural attachment. Read More

    Mounting & Attaching Products

    Sway Braces feature one-size-fits-all design.

    April 30, 2009

    Compliant with NFPA® 13 standards, CADDY® range of products are suited for use with service pipe up to 10 in. and facilitate quick installation. They feature long-lasting, corrosion-resistant finish. Structural attachments include bar joist adaptor, I-Beam adaptor, and universal structural attachment/multi attachment. Sway braces are available in lateral or longitudinal and lateral versions. Read More

    Mounting & Attaching Products

    Battery Isolator reduces charging system workload.

    January 16, 2009

    Smart Battery Isolator 48525/48530 prevents loads on auxiliary battery from draining starting battery, regardless of alternator type. Available in 85 and 200 A versions, product reduces charging system workload by not connecting to auxiliary battery until primary battery is charged to 13.2 V. This minimizes strain on charging components, and no diode efficiency losses occur during use. Product also allows bi-directional charging from alternator or other power chargers/converters. Read More

    Mounting & Attaching Products

    Isolators prevent accessories from draining car battery.

    October 10, 2008

    Battery isolators are suited for those who have high-power accessories that require use of second battery in their vehicle. They let user charge 2 batteries simultaneously and keep starting battery isolated during times when power is being used (without running engine) to ensure accessories do not drain start battery. Working on negative ground alternators, products are rated from 12-48 V and can only be used with batteries that have same voltage level. Read More

    Fluid & Gas Flow Equipment, Mounting & Attaching Products, Transportation Industry Products

    Customer Acceptance as Product for Use in Critical Maintenance Roles, New Products, Informed Customers, Lead Inpro/Seal to Record Breaking Sales and Production Levels

    August 22, 2008

    ROCK ISLAND, IL, JULY 28, 2008 - Inpro/Seal Company, the world's largest producer of industrial bearing isolators, reports that they shipped a record 52,000 seals during the month of June, 2008, the best in their 33 year history. This follows a record breaking 2007 calendar year and 40,000 seals shipped the previous month. <4444>Moreover, Inpro/Seal reports that sales for the first half of... Read More