Thread Mills

Machinery & Machining Tools

Solid Carbide Thread Mills come in 3XD sizes for max reach.

July 8, 2015

Used in aerospace, defense, and medical industries, 3XD THREADS-ALL Tools enable machining of difficult-to-cut materials such as stainless, titanium, and inconel. Tools provide single solution for through and blind holes and offer full bottom threading to within one pitch. With 8 stock standard tool sizes of #10, ¼, 5/16, 3/8, 7/16, ½, 5/8, and ¾, ZGF-I 3XD Thread Mills allow for over 100 commonly produced screw thread designations. Miniature size thread mills come in 4 sizes from 2–8. Read More

Machinery & Machining Tools

Seco to Spotlight Latest Tools for Oil and Gas Applications at HOUSTEX

December 15, 2014

TROY, Mich. — At HOUSTEX 2015 in booth 441, Seco Tools, LLC will highlight its latest threading, milling and turning cutting tools made to handle the extremely tough machining requirements of the oil and gas industry. The company’s applications experts will also be available to help attendees find ways to optimize their production processes via these new tools. The show takes place Feb. 24... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage, Portable Tools

Seco to Highlight New Tools Developed Around Modern Materials at IMTS 2014

July 8, 2014

TROY, Mich. – At IMTS 2014 in booth W-1564, Seco Tools, LLC will unveil several new milling, turning, threading and tool holding products that were developed with material advancements in mind, including a square shoulder cutter that enhances side-milling operations, a multi-edge system that meets the industry's demand for narrow cutting-edge grooving and parting-off tools, an insert that... Read More

Machinery & Machining Tools

Hydratight's geniSYS Provides Unique Solution for Nuclear Plant

November 16, 2012

Global joint integrity specialist Hydratight has provided a unique solution to a significant obstacle in the restoration of a US nuclear plant. Hydratight's one-of-a-kind geniSYS three-dimensional drilling and thread milling machine was found to be the only tool that could complete the job to the accuracy and depth demanded. <4444>A nuclear plant in Tennessee, where construction was suspended... Read More

Machinery & Machining Tools, Material Handling & Storage, Portable Tools, Test & Measuring Instruments

Emuge Introduces Comprehensive Line of Cutting Tools for Wind Turbines

May 11, 2009

WEST BOYLSTON, MA U.S.A. (April 27, 2009) - Today Emuge Corp. introduced an extensive line up of tools optimized specifically for the production of wind turbine components. Continuous technology advancements in components and materials demand high quality tooling for the most efficient and cost-effective machining of parts used in today's wind turbines. Emuge's new Wind Power program offers a... Read More

Machinery & Machining Tools

Solid Carbide Thread Mills have internal coolant supply.

November 16, 2007

By precisely applying coolant where it is needed, SHUR-THREAD GFI Series helps eliminates waste for any size machine shop or production volume. Micro-grain carbide and TiCN-coated products are engineered with multiple spiral flutes to eliminate chatter, and extended milling portion allows for up to 2xD length-of-cut. While enlarged flute space promotes efficient chip evacuation, end mill-type shank with clamping flat allows for secure tool holding. Read More

Machinery & Machining Tools

Thread Mills support left- and right-handed threading.

November 14, 2007

Constructed with steel body and carbide inserts, Model TM25 Thread Mills feature long-edge inserts and have 2 cutting edges per insert. Thread mills are available for parallel and tapered threadmilling applications in pitches from 1-2 mm ISO Unified, 11-10 Whitworth, 11.5-14 NPT, and 11-14 BSPT. Suitable for internal and external threading on most workpiece materials, they are designed for use in general engineering, automotive, and aerospace applications. Read More

Machinery & Machining Tools

Carbide Thread Mills work with difficult materials.

September 18, 2007

Miniature Solid Carbide Thread Mills are designed for machining materials such as stainless steels, titanium, K-monel, hastelloy, and inconel. Available in 1- and 3-flute versions, with latter suited for high-volume output needs, design eliminates possibility and consequences of tap breakage. There is no need for hand tapping during full bottom threading applications, and bottom threading can be performed to within 1 pitch. Thread length varies from 0.125-0.328 in. Read More

Machinery & Machining Tools

Thread Mills are suited for machining exotic materials.

October 27, 2006

Available in inch and metric sizes, EXOCARB® Thread Mills are made of sub-micrograin carbide. Multi-layered TiAlN coating promotes tool life and heat resistance, while high-helix construction promotes chip control. With one thread mill, users can produce varying thread diameters of same pitch; right/left-hand threads; or internal/external threads. Also used for blind or through-hole applications, tools work with materials such as Inconel, Titanium, and High Nickel Content Alloys. Read More

Machinery & Machining Tools

Thread Milling Tool has long-reach design.

October 3, 2006

Manufactured from micro-grain solid carbide substrate, TMLR (long reach thread mill) has fine ground cutting edge and TiALN coating that promote tool life and optimal surface finish quality. Helical design allows tools to be free cutting, and internal threads from 2-56 up to ½-20 let users thread mill small holes. Design also enables threads with 2 and 3 times diameter to be successfully thread milled in demanding materials. Read More

Machinery & Machining Tools, Portable Tools

Solid Carbide Mills cut leak-free tapered threads in pipe.

August 24, 2006

Suited for use in petroleum and natural gas industries, thread mills and insert mills produce threads that achieve tight, leak-free joints in pipe. While spiral-fluted thread mills produce NPT/API thread diameters from 1/16-2 in., indexable partial profile insert thread mills cut NPT/API thread diameters from 1-20 in. Solid thread mills feature micro-grain carbide construction and free-cutting geometry. Each indexable insert has 4 usable cutting edges. Read More

Machinery & Machining Tools

Thread Mills provide 2 x dia length of cut.

January 18, 2005

Featuring micro-grain carbide and TiCN coating, SHUR-THREAD Solid Carbide Thread Mills are engineered with multiple spiral flutes to eliminate chatter. Enlarged flute space provides efficient chip evacuation and end mill-type shank with clamping flat allows for secure tool holding. Cutters produce threads for applications 1 in. and under in range of soft and pre-hardened steels to 58 Rc, stainless steels, aluminum, cast iron, titanium, and Inconel. Read More

Machinery & Machining Tools

Thread Mills machine exotic metals.

November 4, 2003

EXOCARB® Thread Mills combine sub-micrograin carbide with TiAlN coating to handle materials up to 55HRC. Standard inch and metric sizes are available in UNC, UNF, UNEF, UNS, NPT, and NPTF threads. Mills are suited for difficult-to- machine materials such as Inconel, Titanium, and high nickel content alloys in aerospace, medical, and military applications. Read More

Machinery & Machining Tools

Multi-Tooth Threadmills help reduce cycle time.

August 14, 2003

Solid carbide, indexable 396.19 threadmills are designed for internal and external threading. Suited for hole diameters of 7/8 in. and larger, cutters are available in various profiles with different pitches. All inserts for cutters are double-sided and measure 1.57 in. long. Inserts are available in Grade F30M for wear-resistance or uncoated Grade H15 for applications requiring increased wear-resistance. Read More

Machinery & Machining Tools

Threadmills offer alternative to tapping.

July 7, 2003

Threadmaster solid carbide, TiCN-coated threadmills are suitable for thread milling steel, stainless steel, cast iron, and high temperature materials. Large shank diameter offers increased rigidity for higher feed rates, shorter cycle times, less vibration, and longer tool life. Read More

Machinery & Machining Tools

Thread Mills cut difficult materials.

November 13, 2002

Aero Series Type GSF Mills are PVD TiCN coated and have multiple spiral flutes employing micro geometry to reduce cutting forces. They have large cutter diameter with high-profile projections and axial internal-coolant capability for chip removal. Mills are offered in No. 10 1/4, 5/16, 5/8, and 7/16 in. sizes in UNC and UNF. They can cut pre-hardened steels to 58 Rc, stainless and mold steels, inconel, titanium, cobalt, chrome, stellite and other exotic materials. Read More

Machinery & Machining Tools

Thread Mills are made from powder metal material.

September 17, 2002

Greenfield Tap & Die PM Plus Thread Mills feature helical flute design for less thread chatter. They are forgiving of slower spindle speeds, and come standard with TiAlN coating. Thread Mills are suitable for forming inch threads from #8 to 1 in. UNC and UNF; external threads from 32 UN to 8 UN; pipe threads from 1/16 to 6 in. NPT, NPTF, and NPSM; and metric threads from M4.5 to M24 internal and M4.5 to M250 external. Read More

  • 1