Hydratight
Red Wing, MN 55066
Nov 04, 2009 Suited for use on hard-to-reach pipe flanges whose integrity must be maintained, QuickFace has self-centering design with adjustable collets and clamps that provides concentric operation and accuracy. Portable tool weighs 15 lb and uses ½ in. cutting tools. Interchangeable lead screws make it suitable for resurfacing damaged raised-face and lens-ring joint flanges to varying finish standards. Rotated by hand, tool employs worm-gear mechanism that provides spiral gramophone finish.

Sunnen Products Co.
St. Louis, MO 63143
Oct 16, 2009 Suited for engine cylinders and cylinder liners with bore diameters from 2.25-12 in., Precision Hone Tooling System incorporates integral air gaging with automatic shutdown mechanism for non-contact, in-process bore sizing to tolerances of 0.0002 in. Tools use custom-designed and fitted multi-stone tool heads, with number and placement of stones dictated by application. Three abrasive options include diamond or CBN, aluminum oxide/silicon carbide, and abrasive impregnated filament.

SMW Autoblok Corp.
Wheeling, IL 60090
Oct 05, 2009 Designed to optimize performance of Haas lathes with 4,000 rpm driven turrets, Live Tools feature 1:3 speed increasing ratio and are suited for finishing mild steels, aluminum, plastics, and reinforced resins. Low profile of 3.48 in. preserves Z-axis clearance for work-holding and parts, while 3.15 in. width will not interfere with adjacent tools in turret. Live Tools utilize square drive Gleason matched ground helical gears and twin interlocking labyrinth seals to prevent contamination.

Brush Research Manufacturing Co., Inc.
Los Angeles, CA 90022
Sep 25, 2009 Engineered using resin bond diamond crystals with high friability, Diamond Flex-Hone® Tools are suited for deburring, edge blending, and surface finishing in hard materials such as carbide, ceramic, or aerospace steel alloys. Premium coated abrasive aids in heat dissipation and optimizes bond retention. Tools are available in 4-20 mm diameters and 3 different mesh sizes.

Festool USA
Lebanon, IN 46052
Sep 17, 2009 Used for planing carcasses, panels, doors, or trim, EHL 65 E one-handed planer employs 720 W motor in 5.3 lb, ergonomic package. Single, replaceable, spiral cutting knife produces smooth, glue-ready, and chatter-free cuts with minimal noise (76 dB). In addition to base with angled groove for chamfering operations, planer features on-the-fly micro adjustable depth control for cuts up to 5/32 in. or rabbets up to 29/32 in. in 1/256 in. increments.

Sunnen Products Co.
St. Louis, MO 63143
Sep 07, 2009 With 0.00040 in. accuracy, TC Tools overcome blind, ported, and tapered bores, as well as hard surface coatings. Units are equipped with metal-bond superabrasives and use customized abrasive mounting that holds up to 12 stone segments of various lengths. Strategic placement of abrasives produces optimal roundness and consistent finish from top to bottom in blind bores. Featuring hardened tool steel bodies and feed wedges, tools are available for bore sizes 1 in. and up.

DeVilbiss , ITW Industrial Finishing
Glendale Heights, IL 60139
Aug 28, 2009 Packaged in blow-molded case, StartingLine Complete Autobody Prep Kit is comprised of primer spray gun and 6 in. palm sander. Chrome-plated HVLP primer gun has 1.8 mm fluid tip setup and 600 cc aluminum gravity cup and uses 13 cfm @ 30 psi inlet pressure. With Velcro pad and free speed of 8,500 rpm, palm sander operates at max inlet pressure of 90 psi. Kit also includes required wrenches for spray gun and sander as well as set of 6 in. sanding discs in assorted grits.

Dynabrade, Inc.
Clarence, NY 14031
Aug 12, 2009 Powered by 1.3 hp air motor that promotes smooth and controlled operation, Model 52657 may be used on various materials for sanding and deburring applications, surface conditioning, weld preparation, and removing paint/rust. Tool operates at 6,000 rpm and accepts 7 in. dia abrasive discs with 7/8 in. center hole. While vibration-dampening side handle is removable for left- or right-hand use, exhaust system rotates 360° to accommodate operator.

Brush Research Manufacturing Co., Inc.
Los Angeles, CA 90022
Jul 20, 2009 Featuring small, abrasive globules that are permanently mounted to flexible filaments, ball-style Flex-Hone tool produces optimum plateau surface finish in any type or size cylinder, slide, chamber, magazine tube, or smooth bore barrel. It can be used in any hand drill or rotating spindle and is self-centering and self-aligning to bore. Tool can be used to clean out oxidation and corrosion damage in shotgun barrels, and to remove nicks and pits that cause plastic adhesion.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
May 28, 2009 Designed to smooth die and mold surface finishes, polymer lapping product line consists of 8 tools and 2 abrasive compounds. Eight polymer tools are made in varying shapes and sizes and are used on air grinding tools, and abrasive compounds are available in 400 and 600 grits and must be used in conjunction with polymer tools. Technology aids efficiency of hand-applied micro-finishing process.

Dynabrade, Inc.
Clarence, NY 14031
Apr 28, 2009 Available in 35,000, 50,000 or 60,000 rpm versions, Central Vacuum Pencil Grinders power optional carbide burrs and mounted points for precision deburring, engraving, deflashing, etching, cleaning, and finishing. Vacuum Shroud captures dust, debris, and contaminants, including hexavalent chromium, to external vacuum source while air-powered tool is working. Collet sizes of 1/8 and 3 mm are available, and each includes urethane vacuum shroud, air line, and vacuum hose.

Automated Blasting Systems, Inc.
South Windsor, CT 06074
Apr 13, 2009 Used for cleaning, finishing, descaling, and deburring, SS-10 uses scrubbing action that cleans and deburrs via solution of media, water, and compressed air. No chemicals or solvents are used, promoting worker and environmental safety. Manual system has 60 x 70 x 96 in. fiberglass cabinet with 50 x 50 in. door opening, and load end provides 68 X 65 in. area for parking 49 in. trolley-mounted turntable. Other components include media collector and slurry delivery system.

Automated Blasting Systems, Inc.
South Windsor, CT 06074
Apr 13, 2009 Promoting sustainability and ecologically sound practices in manufacturing environments, ABS III can perform cleaning, deburring, and finishing capabilities in one step without any impact on environment. Design, which incorporates fluorescent lighting, non-corrosive cabinet, swing door, 20 in. dia turntable, and 2 hp slurry pump, promotes visibility. Functionality is promoted via abrasion-resistant pump, 6.5 gal slurry hopper, and process gun with 3/8 in. nozzle.

Sunnen Products Co.
St. Louis, MO 63143
Apr 02, 2009 Suited for manufacture of fuel injector bodies, hydraulic valves, gears, and small 2-cycle engines with bore size from 4-65 mm, MMT Metal-Bond Honing Mandrels are precision-machined, with body and feed wedge made from hardened tool steel. Tools produce accuracies of 0.000027 in. for diameter, roundness, straightness, and taper. They are optionally available in 1- to 12-stone versions, designed for use with metal-bond diamond or CBN superabrasives.

Enercon Industries Corp.
Menomonee Falls, WI 53052
Jan 28, 2009 Suited for conductive and non-conductive material, Dyne-A-Mite(TM) IT Elite etches, cleans, activates, sterilizes, and functionalizes surface. Concentrated blown-ion discharge causes micro-etching or scrubbing effect, removing organic and inorganic contaminants and facilitating application and adhesion of coatings, adhesives, inks, labels, and markings of all types. Quality control is self-regulated by real-time Plasma Integrity Monitoring system.

Almco, Inc.
Albert Lea, MN 56007 2751
Jan 13, 2009 With small opening between spinning and stationery components at base of machine, Model ACDF-75 keeps tiny parts from disappearing during finishing process. Urethane-lined bowl does not require frequent relining, which saves equipment downtime. PLC-equipped for precision deburring, machine offers variable speed and is available in 4 sizes to accommodate varying part dimensions and batch quantities. Part/media separation screens are included to minimize operator involvement.

Guyson Corporation of U.S.A.
Saratoga Springs, NY 12866
Dec 10, 2008 Meeting cell-based production requirements, RSSA-6/SF rotary blast machine is adaptable for such purposes as deburring, cosmetic finishing, and technical surface preparation. Single spindle or table is fitted with component-holding fixture that can be changed for processing of different parts. Rotation speed is adjustable and synchronized with timed blast from up to 4 suction-feed blast guns affixed to telescoping brackets that let each nozzle be positioned to provide total coverage.

Bates Technologies
Indianapolis, IN 46038
Oct 30, 2008 ProMatic E-line is designed to fit and function on various honing machines, including Sunnen style SV/CK/CV/ML. Used to hone engine cylinder bores, connecting rods, and transmission gears, all tooling utilizes max number of abrasives ledges (stones) required to meet cylindricity and roundness requirements. E-line suits facilities that are looking to improve existing 2 and 4 stone hone heads but do not have requirement for high-production, high-precision, OEM-style hone tooling.

Modern Process Equipment, Inc.
Chicago, IL 60623
Sep 17, 2008 Intended for ultra-high purity grinding applications, Model 1052 Gran-U-Lizer(TM) can grind hard, abrasive materials, such as polysilicon, silicon, and cadmium telluride to various sizes with little to no foreign material contamination. It delivers high particle uniformity with minimal fines and adjusts to achieve median sizes from 120-500 µm.

Rex-Cut Products, Inc.
Fall River, MA 02720
Sep 09, 2008 Rex-Cut® Megabrite T27 Finishing Flap Discs are offered in 3 grades including coarse, medium, and fine grits for cleaning, deburring, blending, and finishing stainless steel, aluminum, and other metals. Featuring smooth, controlled action, they are constructed with layers of non-woven synthetic fiber surface conditioning materials. Available in 4½ and 5 in. dia sizes with 7/8 in. holes or 5/8-11 adapters, with or without hubs, flap discs are rated for 13,300 rpm max.