Dynabrade, Inc.
Clarence, NY 14031
May 01, 2008 When used with shop lathe, Superfinisher achieves consistent finish on variety of materials including tungsten carbide, chilled iron, stainless steel, chrome plating, brass, and copper. Air pressure regulator ensures uniform contact force between workpiece and roller, while oscillation drive with counter balance provides smooth operation. Using abrasive rolls from 1-4 in. wide, Superfinisher constantly advances rolls at speeds from 1/16 to 1½ ipm.

Spartanics
Rolling Meadows, IL 60008
Apr 25, 2008 Finestac Nested Part Finisher® fully automates extraction and stacking of gaskets and similar die cut nested parts. Batch count can be preset, and unit comes with color touch screen and software. Finisher works inline with any die cutting system, and extracts parts so that they are scratch-free in stacks up to 89 mm tall. Scrap material is collected on conveyor and transported to separate waste bin.

Weiler Corporation
Cresco, PA 18326 0149
Apr 17, 2008 Burr-Rx(TM) disc brushes are made of black nylon filaments co-extruded with high aggression ceramic grains. Constructed with steel shell, they provide dimensional stability, and are produced with 2 in. bore that allows for direct mounting on equipment without need for adapters. Burr-Rx brushes are suited for deburring materials such as inconel, stainless steel, and titanium and are also available in stem-mounted wheel, mini disc brushes, and banded end brush configurations.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
Apr 08, 2008 Weighing 6.8 lb, 4½ in. V28(TM) Grinder (0725-20) handles wide range of applications including cutting bolt, pipe, angle iron, and grinding weld beam. With 3.0 Ah, 28 V lithium-ion battery, it delivers 8,000 rpm and incorporates overload protection and soft start features. Large spindle lock allows for quick wheel replacement and 5-position tool-free guard facilitates adjustment. Battery fuel gauge indicates remaining run time. V28 Grinder is also available in kit.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
Apr 04, 2008 With polyester/cotton backing material, XXL Z3 and compact Z3 flap discs offer edge and angled work surface solutions. Available in type 27 or 29 shapes with either 7/8- or 5/8-11 in. arbor holes, XXL Z3 line of flap discs consist of 12 discs in 4½ in. dia and 40, 60, and 80 grit sizes. Featuring flaps compressed at 4° angle, compact Z3 line of flap discs include 6 discs and come in 4½ in. dia, 40-80 grit sizes, and 7/8- or 5/8-11 in. arbor holes.

Dynabrade, Inc.
Clarence, NY 14031
Apr 03, 2008 Running at 25,000 rpm, air-powered Mini-Dynafile II accepts coated and abrasive impregnated non-woven nylon belts measuring 1/8-½ in. wide x 12 in. long. Lightweight, composite housing minimizes vibration and is thermal insulated to prevent cold air transmission to operator's hands. Featuring multi-positioning grinding head that pivots 180°, tool is suitable for finishing and deburring within narrow openings, as well as blending SS and grinding right angle welds.

Tornado Industries, Inc.
Chicago, IL 60706-3411
Mar 28, 2008 With ability to protect indoor air quality, 2500 B Series of Clean-Air Glazers deliver 2,500 rpm with adjustable pad pressure. Suited for high-speed burnishing, units have sloped housing to improve operator view, safety switches to prevent operation when cover housing is removed, and rear bumper that facilitates pad changing.

Esco Tool
Medfield, MA 02052
Mar 20, 2008 Suited for beveling, facing, and boring alloyed, small bore heavy-wall header tubes and water wall boiler tubes, C-HOG MILLHOG® O.D. Clamping End Prep Tool is equipped with ratchet feed that provides over 1 in. of stroke. Designed for use on tubes as small as ½ in. OD, unit can be fitted between 1 1/8 in. membrane boiler tubes. Working range is ½ to 2½ in. and tool has attached ratchet wrench for fast setup.

Rex-Cut Products, Inc.
Fall River, MA 02720
Mar 13, 2008 Rex-Cut® Mini Flap Discs feature quick-change Type R fastening system for users to change between coarse, medium, fine, and very fine grit sizes of high-performance zirconium grain abrasive. Able to grind and blend in one operation, they are designed for use in right angle grinders. Discs are suited for blending and finishing SS, aluminum, and mild steel; removing machine tool marks; contouring; and general cleaning. They are available in 2 and 3 in. dia sizes.

Williams & White Machine Shop, Ltd.
Burnaby, BC V5B3B3  Canada
Mar 04, 2008 Available in multiple lengths ranging from 60-240 in., KGDM Vertical Spindle Surface Grinder comes equipped with through spindle coolant as standard. Carriage travel incorporates linear bearing technology, while CNC control of grinding stone down feed enables resolution up to 0.0001 in. Offering 360° rotation, magnetic chuck allows specialty fixtures to be mounted to backside of magnet while maintaining precision ground surface on magnet face.

Guyson Corporation of U.S.A.
Saratoga Springs, NY 12866
Feb 26, 2008 Model SP-10 is supplied with cyclone separator and media reclaimer that is lined with abrasion-resistant urethane rubber. Featuring 8 suction-feed blast guns mounted on swing-arm actuator, unit can process circular components up to 40 in. diameter. Blast chamber is 60 x 60 x 60 in. and has automatic sliding doors and motor-driven, 36 in. dia. turntable cart that rotates at controlled and adjustable speed during blasting cycle.

Dynabrade, Inc.
Clarence, NY 14031
Feb 20, 2008 Available in 4, 4½, and 5 in. diameters, Right Angle Sander and Right Angle Depressed Center Wheel Grinder are suited for stock removal, metal cleanup prior to welding, removal of weld beads, and various material removal applications. Both tools are offered in 12,000 or 13,500 rpm versions and feature governor assembly for maintaining speed under load. Safety-lock throttle prevents accidental start-up, and Spindle Lock facilitates and accelerates abrasive/wheel change.

Extrude Hone Corp.
Irwin, PA 15642
Feb 19, 2008 Suited for small to medium-sized workpieces that may be inherently delicate or intricate, CoolPulse 200(TM) electrolytic machine deburrs, polishes, stress relieves, and cleans in one finishing process. Machine can remove rough surfaces from 2.5-5 µm Ra and produce smooth surfaces down to 0.1 µm Ra, providing bright or mirror-like finish on stainless steel and bright to matte finish on aluminum. Electrolyte used in process consists of chilled, non-fuming, odorless, near-neutral solution.

CGW, Camel Grinding Wheels, USA
Niles, IL 60714
Feb 13, 2008 Measuring 6 x 9 in., non-woven hand pads include 5 types in premium line and 3 types in standard line. Premium line, constructed from strong and flexible materials, includes maroon-colored pads for all-purpose use, grey-colored pads for fine finishes, green-colored pads for general cleaning, tan-colored pads for heavy-duty use, and white-colored pads for light-duty work. Standard hand pad line includes maroon-, green-, and white-colored pads.

Comco, Inc.
Burbank, CA 91504 3344
Feb 13, 2008 Environmentally friendly AccuFlo(TM) utilizes Simoom(TM) Technology, which mixes air and abrasive for optimal flow consistency. This results in tight control over volume of powder flowing through machine. System also incorporates ergonomic handpiece and media tank with clear top that facilitates powder level checking. LCD counters keep track of blast cycles and hours of use, and open design with color-coded air lines and connectors facilitate regular maintenance.

Almco, Inc.
Albert Lea, MN 56007 2751
Feb 05, 2008 Designed for safe operation, ATB-7 abrasive blasting machine features heavy-duty cabinet construction with structural steel members. Smartwheel(TM) blasting wheel delivers 325 lb/min of abrasive at 300 fps velocity, and double rear doors facilitate access to cabinet and screens. All motors are gear box-driven, and heavy-duty, 40 in. wide, reinforced mill belt features ribs designed to aid tumbling and unloading. Machine can be moved between locations if necessary.

Ready Jet, Inc.
Tampa, FL 33637
Feb 04, 2008 Eliminating task of manually chipping hardened concrete buildup from inside concrete mixer drum, Ready Jet(TM) lets operator stand on trailer's observation platform and maneuver cleaning arm inside mixer drum via wireless radio remote control. High-pressure water-blasting nozzle safely removes residual hardened concrete from mixer drum interior without damaging shell, blades, or exterior paint. Pump can also power handguns for water blast cleaning other equipment.

Birchwood Casey
Eden Prairie, MN 55344 2138
Jan 30, 2008 TRU TEMP® CNC non-polluting process uses integrated programmable hoist and tank to automatically process iron and steel components with black oxide finish. Operating as self-controlled unit, repeatable solution employs digital Allen Bradley PLC with manual joystick backup. It is supplied as standard with 110 gal tank line system that has output capacity of 4,000-6,000 lb per 8 hr shift. Process program handles up to 3 loads concurrently, with cycle time of 28 min.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)
Tiverton, RI 02878
Jan 29, 2008 Producing up to 1,380°F and 0.35-1.06 cfm, Leister® LE-Mini Heater removes hair-like flash from injection molded, cut, and skived parts, without open flames. Mounted in any orientation, unit requires 120/230 V single-phase and 30 psi air. Heater integrates with various parts handling systems to de-flash at production line speeds and can be controlled via PLC or temperature controller. Measuring 1 x 10 in., LE-Mini can be supplied with nozzles to match application.

Guyson Corporation of U.S.A.
Saratoga Springs, NY 12866
Jan 23, 2008 With 3 hp blower and non-ferrous 3,450 rpm impeller, cartridge-type Model D1000 extracts adjustable 1,000 cu-ft of air/min. Unit is fabricated in continuously welded 12-gauge steel plate with overall dimensions of 112 x 40 x 50 in. Two pleated paper cartridges each have filter area of 226 sq ft and provide average efficiency of 99.99% for particles of 0.5 micron or larger. Automatic pulse jet cleaning of filter cartridges is microprocessor controlled.