Machinery & Machining Tools

Machinery & Machining Tools

KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.

November 16, 2016

Using fine-pitch aluminum body with wedge-style clamps and adjustable pockets, KBDM PCD face milling system is stocked in standard sizes of 2.5 - 8.0 in. (63 - 200 mm). Designed for high-volume machining, unit enables initial cutting speed of 3280 ft/min (1000 m/min) and feedrates of .004 in. per tooth (0.01 mm). With small diamond grains, KD1400 offers excellent chipping resistance. Using... Read More

Machinery & Machining Tools

Tube and Pipe Beveler Mounts on Cart for Total Mobility

November 14, 2016

An O.D. clamping pipe machining tool for beveling small heavy wall tube and pipe that adapts to virtually any work environment and is ideal for training welders is being introduced by Esco Tool of Holliston, Massachusetts.

The C-Monster MILLHOG® is an O.D. clamping tube and pipe beveling machine that can bevel, face, and bore simultaneously, and pull a thick chip dry; without cutting... Read More

Electrical Equipment & Systems, Machinery & Machining Tools

Precision Cutters Optimized For Specific Jobs

November 14, 2016

A full line of precision wire preparation tools for cutting hard wire, Kevlar® insulation, reaching into tight spots, or cutting component leads and flush cutting cable ties is available from Xuron Corp. of Saco, Maine.

Xuron® Precision Cutters are made from high carbon steel with a non-glare black finish, have soft rubber hand grips, Light Touch™ return springs, and Micro-Shear®... Read More

HVAC, Machinery & Machining Tools, Printing & Duplicating Equipment, Thermal & Heating Equipment

16 SEER PHE6 and PCE6 models feature vibration-reducing chassis

November 14, 2016

Available in 2- to 5-ton capacities, 16 SEER PHE6 and PCE6 models feature contractor-friendly design. Providing two-stage compressor and two-stage gas/electric heating, unit offers exact-fit gas/electric hookups and compact cabinet to fit most roof frames or slabs. With removable front and side panels, device offers separate access for refrigeration and heat compartments. 16 SEER models... Read More

Machinery & Machining Tools

Missouri University of Science & Technology Wins WARDJet Waterjet at IMTS Tradeshow

November 14, 2016

On Tuesday, November 1st, representatives from Missouri S&T, WARDJet and Hypertherm gathered at the Rock Mechanics and Explosives Research Center (RMERC) on S&T campus to inaugurate the new WARDKit 5x5 waterjet cutting system. Unlike the other machinery in the RMERC lab, the WARDKit 5x5 waterjet was won by a student team in mid-September at the International Manufacturing and Technology Show... Read More

Machinery & Machining Tools, Textile Industry Products

S-SSL-0630-PBR Automatic Splicer features touch screen interface.

November 14, 2016

Designed with cantilevered roll loading, S-SSL-0630-PBR Splicer features auto registered splicing system for auto compensation of speed change. Featured with turetting unwind roll system, unit is capable for minimal roll lifting. With space saving design, unit’s splice mechanism is coupled with turreting unwind, allows for applying tape on same side of the web and is suitable for packaging,... Read More

Machinery & Machining Tools, Material Handling & Storage

Intelligrated Expands Sortation Portfolio

November 14, 2016

New products offer custom solutions for precise control and efficient product flow in reduced footprint

CHICAGO: Nov. 09, 2016)-Today’s automated operations require flexibility and simplicity to accommodate multiple product and packaging types, fit shrinking layout requirements and scale with growing demand. Intelligrated® (Read More

Agricultural and Farming Products, Machinery & Machining Tools, Transportation Industry Products

Agri-Trade Equipment Expo, Red Deer (Alberta) - Kubota Presents its Newest Products to Western Canada's Farmers

November 14, 2016

RED DEER, AB, Nov. 9, 2016 - From November 9 to 12, Kubota Canada Ltd. (KCL) will take part in the 2016 edition of the Agri-Trade Equipment Expo in Red Deer (Alberta), an exceptional event where visitors will have the opportunity to discover Kubota's new 2016 product line and appreciate their legendary power, durability and reliability. Product specialists available on-site will help... Read More

Architectural and Civil Engineering Products, Machinery & Machining Tools, Plant Furnishings & Accessories

RSX Fire Door Operator with 24-hour battery backup.

November 14, 2016

Ideally suited for commercial purposes, RSX Fire Door Operator has ability to release door completely. Having 24-hour battery backup, unit doesnot require any manual intervention. After fire alarm signal and test key switch, motor can still be operated normally once reset. Product can be used with Overhead Door FireKing  series.

Read More

Machinery & Machining Tools

Walter Surface Technologies Announces New Innovations for Fabtech 2016 in Las Vegas - Booth N2704

November 14, 2016

Montreal QC / Windsor, CT November 10th, 2016 – Walter Surface Technologies, the global industry leader in surface treatment technologies, is pleased to announce that it will once again be exhibiting at the FABTECH Expo at the Las Vegas Convention Center in Las Vegas, Nevada, from November 16-18, 2016. Companies looking to improve quality and increase productivity in the workplace are... Read More

Machinery & Machining Tools

DoveLock Dovetail Vises offers anti-deflection control.

November 13, 2016

Made from pre-hardened 4140 steel, DoveLock Vises allow access to 5 sides of the workpiece in 5-axis, 4th-axis and palletized CNC machining systems. Vises are available in 1-inch and 2-inch jaw width with superior clamping strength. Having unique reversible jaws of 0.33” to 1.65” for wider clamping area, user can apply maximum dovetail strip as needed by configurations. Features sturdy... Read More

Machinery & Machining Tools, Portable Tools

TaskMaster® 3-in-1 Tool with 360° punch head.

November 13, 2016

Ability to cut, crimp and punch with this single tool, TaskMaster® 3-in-1 is battery powered. Rotating the punch head 360° on two axes to punch ½” to 4” holes in steel makes it useful even for space restrained applications.

Read More

Machinery & Machining Tools

Cartridge Mandrel Clamping Device with manual quick-change system.

November 13, 2016

Providing consistent and rigid workpiece ID clamping, Cartridge Mandrel Clamping Device works with diameters of 10 mm allowing concentricity tolerances within 0.01 mm. Used for grinding, turning, milling, drilling and measuring. Device can also be used with 269-90 and 267-20 types of intermediate flanges. Device is built sturdily with hardened clamping segments and guides. While manual... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools

Amada Miyachi America to Showcase Industry-Leading Laser and Resistance Welding and Processing Technology at FABTECH 2016

November 13, 2016

Visit Amada Miyachi in booth C29037

MONROVIA, CA – Amada Miyachi America Inc., a leading manufacturer of welding, marking, cutting, sealing, and bonding technology, will be highlighting its popular LMWS (Laser Marking Workstation) in booth C29037 at FABTECH 2016, which takes place November 16-18, 2016, at the Las Vegas Convention Center, in Las Vegas, NV. The LMWS will be shown with... Read More

Machinery & Machining Tools, Mechanical Power Transmission, Services

4X Models GSC510 and GSC110 for select Citizen Swiss machines.

November 13, 2016

Offering PCM Swiss made 4X high speed spindles, GSC510 and GSC110 from GenSwiss, provides better performance of micro drills, end mills and high speed thread milling tooling. Using planetary style gear system with low profile configuration, 4X models can be installed in Citizen A, L, M and L32 series machines. Product has good surface finishing with unique design to seal out oil and high... Read More

Machinery & Machining Tools

CNC Routers Provide Sign Shops the Capability for Full-Service Sign Production

November 13, 2016

The HD CNC Router is available in 4 x 4, 4 x 8 and 5 x 10 standard sizes, and features a 4 HP HSD high frequency collet spindle, automatic tool calibration, 4-zone vacuum T-slot table, and easy-to-use hand-held controller. The HD machine is open architecture compatible with all industry standard signmaking graphic software.

A successful full service sign company had this to say: ?Our HD... Read More

Machinery & Machining Tools, Mining, Oil Drilling, Refining Products & Equipment

Diamond Drilling Commences on the Coneto Gold-Silver Project in Durango, Mexico

November 13, 2016

VANCOUVER, Nov. 8, 2016 - Orex Minerals Inc. – (TSX-V: REX – OTCQX: ORMNF) ("Orex"), is pleased to announce that project partner Fresnillo PLC (LSE: FRES – BMV: FRES) ("Fresnillo"), has commenced a Phase-V diamond drilling program of approximately 5,000 metres in 11 holes on the Coneto Gold-Silver Project in Durango, Mexico.

The Coneto Project is a joint venture, with ownership of... Read More

Machinery & Machining Tools, Mechanical Power Transmission

Red Heat R983 Abrasive Belts and Discs contain no performance-inhibiting dies.

November 13, 2016

Wear resistant, Norton Red Heat R983 suite of products comes with enhanced grain/bond adhesion. Designed for grinding and polishing metals, R983 Flap Discs are available in three shapes and in sizes ranging from 4" x 5/8" up to 7" x 7/8". R983 Discs are available in TS (Type II) and TR (Type II) in sizes ranging from 1-1/2" to 3". R983 Belts come in lengths ranging from 11" to 700," stand... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools

Clean Ream Plus Plastic Pipe Fitting Reamer guarantees 250 or more reams.

November 12, 2016

Available in 1 ½” and 2” size fittings, Clean Ream Plus Plastic Pipe Fitting Reamers provide less downtime. Engineered to deliver 250 or more reams, units provide quick and easy removal of pipe and solvent cement residue to salvage fittings for reuse. Saving time and material, product eliminates the need of replacing entire sections of pipe.

Read More

Machinery & Machining Tools, Mechanical Power Transmission

ETube and Wire Add the TruBend C60 6 Axis CNC 67 Ton Press Brake

November 11, 2016

The TruBend Series 3000 brings together the best TRUMPF quality with simple operation and an attractive price-performance ratio

• Cost-efficiency, even when operated at low capacity

• High part accuracy

• High productivity

• Simple operation, well thought-through control

About Etube and Wire Read More