Machinery & Machining Tools

Machinery & Machining Tools

Ergonomic Cordless Cut-Off/Angle Grinder uses brushless motor.

June 17, 2015

Powered by 18V LXT® Lithium-Ion 4.0 Ah battery, XAG06M has 5.6 lb design with flush-mount paddle switch and rubberized soft grip. Automatic Speed Change™ Technology adjusts speed and torque for optimum performance, and BL™ brushless motor, which delivers 8,500 rpm with soft start, is electronically controlled to optimize battery energy use and run time. Extreme Protection Technology (XPT) provides dust and moisture resistance, and wire mesh intake covers prevent debris from entering motor. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools, Test & Measuring Instruments

LTE Cellular Gateway maximizes reliability and minimizes latency.

June 15, 2015

OnCell G3470A-LTE helps system integrators utilize LTE to transform M2M applications. Integrated high-speed, 4-port Gigabit Ethernet switch allows up to 4 devices to be connected with ability to NAT and route between cellular connection and wired ports. Together, features such as dual SIM support for cellular connection redundancy, dual power input, and GuaranLink™ technology for connectivity ensure uninterrupted video streaming over LTE networks in harsh and demanding industrial environments. Read More

Machinery & Machining Tools, Material Handling & Storage

Pouch Dispenser features motor-fed precision cutting.

June 15, 2015

Designed to cut and dispense variety of materials of varying thicknesses, fed from continuous web, SUR-PAK™ VIP-100 is suited for desiccant, oxygen absorbers, food packs, and promotional items. Design includes timing screw, ensuring controlled and accurate insertion into bottles at speed of 200 cycles/min. Requiring 110 Vac, 50/60 Hz, single phase, and 30–90 psi supply of compressed air, SUR-PAK™ VIP-100 has cantilever design that facilitates cleaning and servicing. Read More

Machinery & Machining Tools

Modular Tooling System shortens changeovers.

June 12, 2015

Part of VersaHone family of honing products, VHT Tooling System is designed to maximize productivity and shorten changeovers from part to part. System features rotary expansion drive with 10:1 eccentric gear ratio and threaded tool connection. With inclusive range of 1.98–22.0 in. I.D. based on modular design, VHT uses standard OH500 and OH700 stones and guides. System is suitable for customers who deal with short runs and broad range of part diameters. Read More

Machinery & Machining Tools

Stainless Steel Turning Grades are constructed for extended life.

June 12, 2015

As turning grades suited for machining stainless steels, AC6030M and AC6040M feature Absotech™ grade coating that promotes resistance to wear, adhesion, and fracture for extended tool life. While AC6030M possesses TiB2 surface layer that creates adhesion and chipping resistance, AC6040M has Ti and Al composition for optimized flank and notch wear resistance. Chipbreaker lineup, highlighted by EEM breaker, provides maximized chip control when roughing. Read More

Machinery & Machining Tools, Portable Tools

Cordless Circular Saw features brushless motor.

June 12, 2015

Powered by 18 V LXT Lithium-Ion 4.0 Ah battery, Model XSH03M is equipped with BL™ Brushless motor, which is electronically controlled to optimize battery energy use, and delivers no load speed of 5,000 rpm for fast cutting and ripping. Automatic Speed Change™ Technology adjusts speed and torque under load for optimum cutting performance. With 6 ½ in. blade, saw has cutting capacity of 2 ¼ in. at 90° and bevel capacity of 0–50°. Three-stage LED indicator monitors battery charge status. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

IIoT Gateway simplifies field device integration.

June 11, 2015

Equipped with dual serial ports, FieldServer EZ Gateway Modbus to BACnet (FS-EZX-MOD-BAC) interfaces Modbus RTU and Modbus TCP devices, such as power meters and flow meters, to BACnet MS/TP or BACnet/IP systems in commercial and industrial facilities. EZ Profiles feature reduces configuration and installation time, while DeviceProxy™ virtualization allows Modbus devices to be managed and reconfigured as though they are native participants in BACnet management framework. Read More

Machinery & Machining Tools

Hybrid Wire optimizes EDM machining quality and cleanliness.

June 11, 2015

Available in both hard and soft versions, ZT Hybrid Wire features baked-on external zinc layer. Coating forms microscopic, precision pockets on wire's surface that allow more water to integrate into cutting process. Extra water allows for maximum spark energy for fast, accurate cutting as well as fine finishes. Added texture also gets water closer to brass core allowing for efficient off-time cooling, minimizing risk of electrode breakage. Read More

Machinery & Machining Tools, Textile Industry Products

Automatic Film Splicer maximizes line efficiency.

June 9, 2015

Suited for consumer packaged goods and pharmaceutical shrink sleeve packaging operations, SP3HSL Series will maximize line efficiency by eliminating film roll change downtime. Automatic web splicing system is capable of running at speeds up to 450 fpm, automatically splicing end of each expiring roll of film onto new roll. System is suitable for both new production lines and for retrofit installation on existing packaging lines. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Machinery & Machining Tools

Multi-Stream Router delivers 5.4 Gbps total Wi-Fi data rates.

June 5, 2015

Used where multiple devices concurrently stream HD and Ultra HD content, 8-Stream 5G WiFi XStream MU-MIMO platform features pentacore architecture that realizes max speeds over 3.8 GHz. MU-MIMO support improves wireless networking efficiency, while 1024 NitroQAM™ technology promotes performance, reach, and rate through high-power RF on 5 and 2.4 GHz bands. Router supports 8 streams at 5 GHz and 4 streams at 2.4 GHz; extended 5 GHz support adds three 80 MHz channels and two 160 MHz channels. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

High-Throughput Router suits high-security corporate networks.

June 5, 2015

Available for JUPITER™ System, Model HT1300 is designed to operate over conventional C-band and Ku-band, as well as Ka-band satellite capacity. Device provides 100 Mbps throughput and boasts high availability via L-band interface to operate with variety of outdoor units, including high-power amplifiers. Fully managed from central location, Model HT1300 provides continuous status monitoring and diagnostics that are integral to JUPITER's embedded web GUI. Read More

Machinery & Machining Tools

Plasma Cutting System features built-in process database.

June 4, 2015

Designed for heavy-duty mechanized cutting, Smart Plasmarc™ 200 m2 System cuts broad range of material types and thicknesses using air, oxygen, or nitrogen gases. System delivers high productivity piercing and cutting in mild steel up to 1.25 in. thick, with capacity to edge start and sever materials up to 2 in. thick. Offering fully 100% duty cycle at 200 A, Smart Plasmarc™ 200  provides high cut quality with minimal dross, reduced warping, and small heat-affected zone. Read More

Machinery & Machining Tools

Sheet Hydroforming Press offers cycle time under 30 seconds.

June 3, 2015

With 20 in. diameter max blank size, 10 in. draw depth capacity, and integrated tool change system, 10,000 psi Triform Model 20-10-10BD allows manufacturers to form large parts within relatively small footprint. Precision diaphragm pressure and punch position control, combined with built-in recipe handling capability, offers optimized forming proficiency in intuitive package. With In-Sight feature, press can be paused and opened at any point in forming cycle to allow for visual inspection. Read More

Materials & Material Processing, Machinery & Machining Tools

Benchtop Resin Mixer eliminates cleanup requirements.

June 2, 2015

Designed to gently mix resins and thick liquids without producing any air bubbles, RM-1000 grips up to 4.2 in. dia container (~1,000 ml) and rotates it while holding mixing paddle to create turbulence. Cup and paddle are disposable upon completion of mixing process, eliminating cleanup requirements. Features include adjustable chuck, variable speed knob (up to 65 rpm) for different viscosities, consistent mixing speed, and 12 Vac adapter. Read More

Test & Measuring Instruments, Optics & Photonics, Machinery & Machining Tools

Laser Shaft Alignment System offers touchscreen navigation.

June 1, 2015

Developed for use in industrial applications utilizing rotating machines, Model TKSA 41 helps identify and correct shaft misalignment to maximize equipment uptime. Free measurement feature allows alignment measurements to start at any angle and finish with total angular sweep of only 90°. Live view supports intuitive measurements and facilitates horizontal and vertical alignment corrections. After each alignment, TKSA 41 generates customized report with notes and pictures from built-in camera. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Machinery & Machining Tools, Communication Systems & Equipment

Satellite Communications Router supports 100 Mbps throughput.

June 1, 2015

Fully managed from central location, HT1300 enables satellite operators worldwide to leverage JUPITER™ System over conventional satellite capacity while positioning them for seamless migration to future high-throughput (HTS) satellites. Router operates over conventional C-band and Ku-band while also supporting Ka-band satellite capacity. High availability and flexibility via L-band interface enable operation with outdoor units, including high-power amplifiers. Read More

Labels, Tags, Signage & Equipment, Machinery & Machining Tools, Optics & Photonics

Flatbed Laser Engraver is suited for signage applications.

June 1, 2015

With 51 x 35 in. working area and 100 W laser tube power, SID XL 1390 is suited for production of engraved and POP displays, award plaques, architectural signage, and promotional items. Sensors and laser cutting head ensure precise engraving of fine details, such as 2 mm dia circles, while productivity is fostered via 16 ips max cutting speed and 23 ips max engraving speed. System also works on acrylic, MDF, plywood, rubber, and cardboard. Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Textile Industry Products

Vertical Accumulator improves productivity in Web processes.

May 29, 2015

Able to fill at high speeds, even when down-line process has been stopped, SplicePerfect™ GACC Vertical Accumulator allows for core changes and product splicing while process line continues at constant velocity. Once rewind operation resumes, this festoon style vertical accumulator feeds out at speeds exceeding process line speed until all accumulated material has been paid out. System is custom designed to meet application requirements of continuous web processes.
Read More

Machinery & Machining Tools

Portable Electric Press Brakes offer 24-ton capacity.

May 29, 2015

Suitable for small parts, Dyna-Press 24/12 can handle bend lengths up to 1,250 mm. Rapid acceleration and deceleration of electrical servo-driven ram delivers bending speeds up to 25 mm/s. Coupling of ram and servomotors is realized through 2 heavy-duty ball screws to distribute force and tonnage evenly. Featuring 1,140 x 1,760 mm footprint, Standard model has 12 in. touchscreen, while Plus model offers TOUCH-B Lite control that lets user create and simulate 2D designs on 15 in. touchscreen. Read More

Portable Tools, Machinery & Machining Tools

Tube and Pipe Beveler preps small bore heavy wall tubes.

May 29, 2015

Developed for machining highly alloyed tubes, ESCO C-HOG MILLHOG® O.D. Clamping End Prep Tool features rugged clamp that mounts onto outside of tube, evenly distributing holding power to assure chatter-free end prep. Tool is 1 ¾ in. wide to fit in tight areas and is equipped with 1.07 hp pneumatic motor that runs at 130 rpm. Capable of prepping tube and pipe from ½–3 in. O.D., tool is suited for high-purity piping systems requiring 37 ½° bevels, flat-facing, J-preps, or orbital welding. Read More