Jet Edge Introducing Waterjet Cutting Systems for Farm Machine Shops at Triumph of Agriculture Exposition March 12-13


FARM-JET® and TACH-JET® Waterjets Cut Parts from Virtually Any Material



ST. MICHAEL, Minnesota, U.S.A. — Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet cutting technology will introduce its new FARM-JET® and TACH-JET® waterjet systems at the Triumph of Agriculture Exposition, March 12-13 at Omaha's CenturyLink Center.  Look for Jet Edge in booth 2129.5/2129.6. 



Designed and priced for farm machine shops, Jet Edge's 55,000 psi FARM-JET® and TACH-JET® waterjets bring the power and versatility of ultra-high pressure waterjet cutting technology to farm machine shops for the price of a new fully loaded 1 ton 4X4 pickup truck, without requiring special electrical service.  These powerful machines cut parts from virtually any material without heat or flames, leaving a clean edge free of slag, without producing noxious fumes.



"Until now, if you wanted a waterjet, it meant a six-figure investment and access to 460 volt power," noted Jude Lague, Jet Edge president. "Now you can own a waterjet for the price of a new truck and you can run it off standard household electric. With a waterjet system, you can create a nice source of additional revenue, and if you need a part fast, you can cut it in minutes instead of waiting for days or weeks to have it fabricated and shipped."



FARM-JET® Waterjet System

FARM-JET® includes a 40"x40" waterjet cutting table and a Jet Edge Eco-Jet PTO direct drive waterjet pump that utilizes a tractor's PTO shaft to produce 1 gpm of 55,000 psi water. The system includes one abrasivejet cutting head and a motorized Z axis with 5 inches (130 mm) of travel.   



FARM-JET® is controlled with a Windows® PC (sold separately) and uses a FlashCut Pro-Series Stepper Controller and FlashCut CNC software.  It also includes IGEMS path generation software and a hand-held controller pendant for operator convenience. FARM-JET is available for 540 RPM and 1000 RPM PTO shafts and Category 1 and 2 three point hitches (tractor sold separately).  It requires a 115v 60 Hz or 230v 50Hz power source, fresh water source and a suitable tractor.



TACH-JET® Waterjet System

TACH-JET® includes a 40"x40" waterjet cutting table and a Jet Edge Eco-Jet TACH direct drive waterjet pump that that converts a tractor or skid steer's hydraulic power into 1 gpm of 55,000 psi water. The system includes one abrasivejet cutting head and a motorized Z axis with 5 inches (130 mm) of travel.   



TACH-JET® is controlled with a Windows® PC (sold separately) and uses a FlashCut Pro-Series Stepper Controller and FlashCut CNC software.  It also includes IGEMS path generation software and a hand-held controller pendant for operator convenience. It requires a hydraulic power unit capable of a minimum output of 50 HP (tractor or skid steer sold separately), a 115v 60 Hz or 230v 50Hz power source, and fresh water source.



Waterjet Technology Seminars

Learn more about ultra-high pressure waterjet cutting during Jet Edge's free seminars "Waterjet Cutting Technology for the Farm Machine Shop" at 10 a.m. March 12-13.  Jet Edge waterjet experts will provide a technical overview of Jet Edge's FARM-JET® and TACH-JET® systems and explain how waterjet can benefit farm machine shops by producing parts better, faster and cheaper, and by creating an additional revenue stream.



Find out more about Jet Edge at www.jetedge.com, or call 1-800-JET-EDGE (538-3343) or 763-497-8700.



About Jet Edge

Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops.



Jet Edge, Inc. 

12070 43rd Street N.E. 

St. Michael, MN 55376-8427

U.S.A.

www.jetedge.com  

+1-763-497-8700 

800-JET-EDGE 

sales@jetedge.com



Contact:

Nancy Lauseng

Marketing Manager     

763-497-8726

 nancyl@jetedge.com



Jaimie Larson

Sales Marketing Assistant

763-497-8742

 jaimiel@jetedge.com


More from Architectural & Civil Engineering Products

All Topics