NewAge Industries Inc.
Southampton, PA 18966
Aug 06, 2007 Resistant to flex fatigue, Nylotube® is stocked in semi-rigid and flexible grades and inch/metric sizes. Products exhibit low moisture absorption (1.4% max at 73°F) and are resistant to corrosion, abrasion, crushing, cracking, and brittleness. While nylon-12 formulation is suited for industrial applications, nylon-11 formulation is produced with FDA-approved ingredients and can be used with food contact surfaces. Both versions can be used over -90 to +212°F range.

Zeus Industrial Products, Inc.
Orangeburg, SC 29115
Aug 06, 2007 Consisting of dual-layer, high-purity PFA coextruded tubing, Perme-Shield(TM) features inner fluid contact surface of copy-exact, high-purity PFA and outer layer of high-purity low permeation polymer. Product's ID meets SEMI F57 standards for purity. Tubing can be laser marked or striped for identification and is capable of being welded.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Jul 25, 2007 Designed for chemical lines, acid lines used in wet benches, and CMP process equipment, Low Permeation PFA Tubing is also suited for any industry where permeation affects purity of process chemicals. It protects against permeation and oxidation, minimizing premature failure of tubing and foul purity of chemical or process media inside tube. PFA Tubing is available in standard sizes as small as ½ OD x .062 in. wall, ¾ OD x .062 in. wall, and 1 OD x .062 in. wall.

Amalga Composites, Inc.
Milwaukee, WI 53214
Jul 13, 2007 Offering low coefficient of thermal expansion, BA Ultra Premium Pneumatic Cylinder Tubing provides smooth, self-lubricating wear surface that prevents pistons from sticking. It can be used to replace honed and chromed steel, stainless, and aluminum tubing with no additional machining required.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Jul 09, 2007 Made to withstand repeated compression and release, APSPG Silicone Tubing offers smooth surfaces for uniform fluid flow and resistance to bacteria build-up. It features translucent design for visual contact with flow and will not impart any taste or odor to flow streams. Manufactured in certified Class 1000 HEPA-filtered clean room, APSPG handles temperatures up to 400°F. Sizes from .031-.063 in. come in 25 ft lengths while larger sizes up to ½ in. ID come in 50 ft lengths.

Memry Corp.
Bethel, CT 06801
Jul 06, 2007 Featuring clean and smooth construction, V2 Nitinol tubing is designed in sizes below .020 in. ID. It combines dynamic superelastic properties of Nitinol with diameter sizes that facilitate further upstream anatomy procedural capabilities. Flexible product features thermal shape memory and is suited for use in healthcare field delivery applications.

Lexington Energy Services Inc.
Calgary Alberta T2P 2G6  Canada
Jun 20, 2007 Offered to clients on day-rate contract basis, 2 coiled tubing units in Calgary, Alberta can be used for well cleanouts to enhance or initiate production in oil or gas wells. Continuous string of pipe, inserted into drill hole, facilitates use of specialized tools, stimulation fluids, and nitrogen pumping. Along with 2 Lexcoil employees for support, service offers option of contracting coiled tubing units in tandem with company's nitrogen generation units.

Parker Hannifin Corp.
Oxford, MI 48371
Apr 30, 2007 TexFluor(TM) FEP, PTFE, PFA, and ETFE tubing, used to splice together cabling or encapsulate wiring, provides protective covering and increases lubricity of cabling, instruments, or catheters. Promoting in-field identification, fluoroplastic heat-shrinkable tubing is available with laser-marked part numbers, text, bar codes, or logos. Once tubing is lasered, non-contaminating, indelible marks are virtually unremovable to allow traceability.

Norplex Micarta
Postville, IA 52162
Apr 11, 2007 Convolute wound tubing material, RT511, is able to maintain its strength at temperatures to 150°C while providing electrical insulation. Made of glass epoxy resin system, product is available in IDs from 0.750-48 in. and ODs from 0.875-50 in. with wall thicknesses from 0.062-1.0 in. It also performs in situations where bond strength and delamination are important requirements.

Kentak Products Co.
East Liverpool, OH 43920
Mar 30, 2007 AQUAKING Series descends to bottom of pond, lagoon, or lake without use of extra weights and delivers air into water from electric aerator, windmill, or other type of aeration system. Available in sizes from 3/8-1 in. ID on custom-order basis, Pb-free tubing is constructed of negative-buoyancy PVC material. Applications include delivery of oxygen to water for creating essential circulation patterns, eliminating stagnation, and promoting healthier environments.

Norplex Micarta
Postville, IA 52162
Mar 06, 2007 Made with epoxy resin and texturized woven fiberglass, RT500 Tubing can be manufactured in lengths of 36 and 48 in., with IDs from 0.750-48 in., ODs from 0.875-50 in., and wall thicknesses from 0.062-1 in. Offering resistance to delamination, tubing is machinable and used primarily in electrical markets and pipeline applications where electrical insulation properties are required. Composite meets MIL-I-24768/2, NEMA G-10, and ASTM D709 Type IV Grade G-10 requirements.

J. W. Winco, Inc.
New Berlin, WI 53151
Feb 28, 2007 Available in round versions from 10-50 mm diameter and square models from 20-50 mm, Metric Construction Tubing comes in variety of materials, including untreated or zinc-plated steel, untreated or anodized aluminum, and stainless steel. Tubing can be supplied in any length in 1 mm increments, up to 3,000 mm.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Feb 09, 2007 Designed with colored stripe down entire length, Colortrax(TM) Tubing provides instant, positive identification of lines without obstructing view of media. Colortrax(TM) bonds fluoropolymer to fluoropolymer, providing resistance to rub-off, chemical attack, and heat deterioration. Pigmented fluoropolymer is confined to tubing's outer wall, avoiding risk of contaminating fluids inside. Available in PTFE, FEP, and PFA, tubing comes in 10 striping colors and in sizes up to 1 in. OD.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Oct 18, 2006 Made of polyolefin, ZEROHAL ZH2 and ZH4 carry 125°C temperature rating, pass UL/CSA VW-1 flame test, and are suitable for commercial electronic applications that require low toxicity materials. ZH2 is available in 27 metric sizes with inside diameters ranging from 0.8-30 mm and min recovered wall thicknesses from 0.33-0.89 mm. Available in 15 sizes with inside diameters from 0.6-10.0 mm, ZH4 has min recovered wall thicknesses of 0.25-0.28 mm. Shrink ratios are nominally 2:1 for both.

Norplex Micarta
Postville, IA 52162
Oct 18, 2006 Providing electrical insulation and moisture resistance, Model RT628 phenolic-paper composite tube material can be used in electrical or general-purpose applications, and is suitable for small components that require complex machining patterns. Features include tensile strength of 12,300 psi, compressive strength of 22,500 psi, and moisture absorption of 1.3%.

Qosina Corp.
Edgewood, NY 11717 8329
Sep 25, 2006 Available in coils with IDs from .020-.156 in. and ODs from .060-.250 in., multilayer tubing combines attributes of non-reactive polyethylene with clear, flexible, medical-grade PVC. This 78A durometer hybrid tubing has pure LDPE inner layer that is compatible for contact with various reagents. Exterior non-DEHP PVC layer provides assembly, feel, and bonding characteristics of traditional medical tubing.

VICI Valco Instrument Co., Inc.
Houston, TX 77255
Aug 30, 2006 Dual Layer Color-Coded PEEK Tubing features pigmented layer surrounding separate integrally-bonded inner layer of natural PEEK, separating pigments used to color code tubing from inside samples. Available in ID from .002-.030 in., 1/16 in. OD tubing features ID tolerance of ±.001 in. Standard sizes and colors include: .005 in. red; .007 in. yellow; .010 in. blue; .020 in. orange; and .030 in. green. Tubing is available striped or solid, and colorants are RoHS-compliant.

Adaptaflex Limited
Coleshill Birmingham B46  United Kingdom
Aug 14, 2006 Non-metallic UL1696 nylon flexible tubing system is designed for protection of electrical cabling to meet harmonized UL1696 standard. Lightweight and flexible, system features push and twist Adaptalok fittings for liquid tight performance. System is fire resistant and suited for use on machinery, machine tool, process plant, production equipment, and public buildings.

Diba Industries
Danbury, CT 06810
Jun 16, 2006 Flared Tubing Assemblies are available with range of standard threaded connectors and tubing sizes, as well as custom configurations. Using thermal forming technique, ends of assemblies are flared and backed with washer and threaded bottom seal fitting to create leak-tight seal. By eliminating need for ferrule, compressed tip, or flanged insert, flow path diameter and consistent volume are maintained in sample, wash, waste, and other types of lines.

CPI Inc.
Knoxville, TN 37922
Jun 02, 2006 Available in 100 ft lengths with 1/8 in. ID, PEX Icemaker Tubing offers secure, pressure-resistant connection and helps minimize water damage resulting from leaks for breaks in standard tubing. With no chemicals used during processing, there are no chemicals to leach into water supply. UV inhibitor provides protection from degradation caused by exposure to sunlight. Tubing provides safe, clean conduit for potable refrigerator-dispensed ice cubes and cold drinking water.