NewAge Industries Inc.
Southampton, PA 18966
Jun 27, 2008 Ranging from 1/16 to 4 in. ID, Clearflo® Tubing offers glass-like clarity with flexibility similar to rubber. Lightweight and abrasion-resistant, product handles assortment of applications involving liquid transfer, air lines, processing, and jacketing. Manufactured from non-toxic ingredients that conform to FDA and 3A standards, tubing has mirror-smooth surface to resist bacteria and sediment buildup, and handles temperatures from -41 to 175°F.

Norplex Micarta
Postville, IA 52162
May 07, 2008 Offered in 18-24 in. lengths, Micro ID Tubing features 0.094-0.187 in. ID and 0.156-0.500 in. OD. Phenolic paper grades such as RT629 and RT630 are used in electrical, heavy industrial, and general-purpose applications, while RTB320X, composed of extra-fine weave linen cloth and phenolic resin, is suited for ball bearing retainers in rotary equipment. Glass fabric grade, RT500X, uses extra-fine weave glass reinforcement with epoxy resin for cryogenic insulation.

NewAge Industries Inc.
Southampton, PA 18966
May 01, 2008 Silcon® Medical unreinforced tubing withstands temperatures from -100 to +400°F and is stocked in 22 sizes ranging from .012-¾ in. ID. Withstanding -80 to +350°F temperatures, braid-reinforced Silbrade® Medical hose is offered in 8 sizes from 1/8-1 in. ID. Both are translucent, peroxide-cured, and inert to UV, radiation, and ozone. Silicone elastomer meets USP Class VI and NSF-51 requirements, as well as FDA standards for use with food contact surfaces.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Apr 16, 2008 Manufactured from biopharmaceutical-grade TPE, AdvantaFlex(TM) is designed for high-purity fluid transfer and exhibits properties that promote performance fluid lines and peristaltic pumps. Translucent solution, free of animal-derived ingredients, may be sterilized by autoclave or gamma radiation and complies with USP, ISO, EP, and FDA standards. Offered in sizes from 1/8-¾ in. ID, tubing is formulated for low permeability and withstands repeated compression and release.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Mar 05, 2008 Manufactured specifically for peristaltic pumps, APSPG platinum-cured silicone tubing withstands repeated compression and release for consistent performance. Flexible product snaps back into its original form during pump use and promotes steady fluid flow due to unchanging interior shape. Offered in 10 sizes from .031-.500 in. ID, sterilizable/autoclavable tubing has -100 to +400°F operating range and smooth surfaces that resist bacteria buildup.

Qosina Corp.
Edgewood, NY 11717 8329
Mar 05, 2008 Available in 25 and 50 ft coils, Class VI Platinum Cured Tubing ranges in size from .031-.500 in. ID and .156-.750 in. OD. It can withstand repeated compression for consistent performance and is suitable for biotechnical, medical, and pharmaceutical applications. Compared to standard tubing, platinum cured tubing offers smoother surfaces, higher purity, fewer leachables, and lower protein binding.

Freelin-Wade Co.
McMinnville, OR 97128
Feb 12, 2008 Suited for applications requiring chemical resistance or exposure to range of temperatures, Fluorinated Ethylene Propylene (FEP) tubing is available in various lengths and has flexible nature suited for use with self-retracting coils. Product can be used in harsh environments and exhibits minimal moisture absorption. Also suited for use in food contact applications, tubing is offered with various coiling, jacketing, packaging, and cutting options.

NewAge Industries Inc.
Southampton, PA 18966
Feb 07, 2008 Offered in ether- and ester-based formulations, Superthane® tubing combines properties of plastic and rubber to withstand wear, abrasion, weathering, chemicals, fuels, and moisture while retaining flexibility. Tear-resistant product, available in sizes from 1/16-2 in. ID, needs no plasticizers and is suited for various gas and fluid transfer applications. Ether and ester formulations contain non-toxic ingredients that conform to FDA standards.

RathGibson
Janesville, WI 53547-0389
Feb 07, 2008 Offered in 2 versions, 6 in. OD tubing is crafted with 316L stainless steel and suits applications in pharmaceutical and biotechnical industries. All tubing is bore scoped and polished to minimize surface anomalies and reduce corrosion and pathogen contamination. While High Purity tubing is SFT1 finished with 20 µin. Ra ID max and 30 µin. Ra OD max, Ultra High Purity tubing is SFT4 finished with 15 µin. Ra ID max and 30 µin. Ra OD max.

Applied Plastics Co.
Norwood, MA 02062
Dec 27, 2007 Suitable for PTCA guide wire, catheters, needles, and other devices, PTFE Coated Nitinol Tube features lubricious coating while maintaining kink-resistant characteristics. It can be processed in sizes from 0.002 in. OD and up in lengths to 10 ft. PTFE coating can be applied with coating tolerances from 0.0001-0.0003 in. Available in green, grey, blue, and black, product can incorporate marker bands at user-specified intervals. PTFE coating service is available for all hypotube variations.

NewAge Industries Inc.
Southampton, PA 18966
Dec 06, 2007 With ability to withstand repeated bending, stretching, and pulsating forces, Newtex Latex Tubing can also withstand repeated sterilization with steam, ethylene oxide, or gamma radiation. Made from non-toxic, liquid natural latex that conforms to FDA standards, latex rubber tubing has no added plasticizers, coagulants, or fillers to migrate and contaminate stream or cause tube hardening. It is available in 18 sizes ranging from .063 to .750 in. ID.

Grayline, Inc.
Waukesha, WI 53188
Nov 29, 2007 Manufactured to dimensional requirements, HF100 polyolefin-based flexible tubing has operating temperature range of -30 to +90°C and is suited for applications in which fire safety is of concern. Recyclable product is flame retardant and emits minimal levels of non-toxic smoke if ignited. Additionally, any gases emitted in event of fire are minimally corrosive. Offered in standard and custom colors, tubing is Pb-free and RoHS-compliant.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Nov 06, 2007 Fluoroplastic Paratubing consists of 2-4 tubes longitudinally thermally welded, creating single conduit consisting of multiple individual tubes. It enables OEMs to run several fluid lines as one entity and then split tubes apart for branching to different connectors when needed. Available in chemically inert and non-leaching Texflour(TM) FEP and PFA with non-stick surface, tube is offered in sizes as small as .031 in. ID x .030 wall up to 3 in. OD.

Parker Hannifin Corp.
Houston, TX 77087
Oct 05, 2007 Texflour(TM) Fluoropolymer Medical Tubing is available in single and multi-lumen tubes and as heat shrinkable tubing in sizes ranging as small as .004 in. ID up to 1 in. Offered in Texflour(TM) PTFE, FEP, PFA, ETFE, and PEEK(TM), FDA and USP Class VI compliant tubing features non-stick surface and is chemically inert and non-leaching. Tubing can be customized to meet specific application requirements.

Reichel-Korfmann Co., Inc.
Milwaukee, WI 53209
Sep 27, 2007 Made from FDA-approved materials in any size and any shape, Rubber Flex Connectors provide connection between discharge chute from screen and pneumatic blow lines in mills. They replace fabric connectors used in milling industry, minimizing maintenance concerns, and provide alternate approach to rubber sleeves, socks, boots, or tubes. Constructed with smooth interior surface, products are offered with wall thicknesses from 1/32-2 in.

NewAge Industries Inc.
Southampton, PA 18966
Sep 19, 2007 Made from 100% pure Viton and available in 24 sizes from 1/32-7/8 in., Vitube® Tubing can withstand -30 to 400°F continuously and resist chemicals such as aliphatic and aromatic hydrocarbons, oils, fuels, lubricants, and mineral acids. Black in color, product is suitable for outdoors in sunlight and ozone. Type B, with 60 A hardness is designed for peristaltic pump use, while Type A, with 75 A hardness is used for most other applications.

Norplex Micarta
Postville, IA 52162
Aug 08, 2007 Available in lengths of 36 and 48 in., OverWrap Tubing can be manufactured with overwrap sizes of 0.625-2 in. and outside diameters from 0.75-3.5 in. Composite material is wrapped around rigid core, enabling manufacturers to use products with different properties on inside and outside of tube. OverWrap Tubing can enclose virtually any rigid tubing or cylindrical core that adheres to composite prepreg materials, including steel, copper, brass, and certain thermoplastics.

NewAge Industries Inc.
Southampton, PA 18966
Aug 06, 2007 Resistant to flex fatigue, Nylotube® is stocked in semi-rigid and flexible grades and inch/metric sizes. Products exhibit low moisture absorption (1.4% max at 73°F) and are resistant to corrosion, abrasion, crushing, cracking, and brittleness. While nylon-12 formulation is suited for industrial applications, nylon-11 formulation is produced with FDA-approved ingredients and can be used with food contact surfaces. Both versions can be used over -90 to +212°F range.

Zeus Industrial Products, Inc.
Orangeburg, SC 29115
Aug 06, 2007 Consisting of dual-layer, high-purity PFA coextruded tubing, Perme-Shield(TM) features inner fluid contact surface of copy-exact, high-purity PFA and outer layer of high-purity low permeation polymer. Product's ID meets SEMI F57 standards for purity. Tubing can be laser marked or striped for identification and is capable of being welded.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Jul 25, 2007 Designed for chemical lines, acid lines used in wet benches, and CMP process equipment, Low Permeation PFA Tubing is also suited for any industry where permeation affects purity of process chemicals. It protects against permeation and oxidation, minimizing premature failure of tubing and foul purity of chemical or process media inside tube. PFA Tubing is available in standard sizes as small as ½ OD x .062 in. wall, ¾ OD x .062 in. wall, and 1 OD x .062 in. wall.