Flexaust Co., Inc., The
Warsaw, IN 46581
Jul 09, 2008 Utilizing negative/positive pressure, Flexaust Flex-Lok® ET High Temperature Hose is designed for -65 to 1,050°F continuous service and excursions to 1,250°F. Available with 6:1 and 8:1 compression ratios, it comes in sizes ranging from 3-12 in. I.D. in standard 25 ft lengths. Hose features single-ply aluminum coated fiberglass ceramic fabric construction with coated steel wire that is mechanically crimped in continuous process and which acts as wearstrip for external abrasion resistance.

Parker Hannifin Corp., Hose Products Division
Wickliffe, OH 44092 1797
Jun 18, 2008 Available in 3/16 to 2 3/8 in. sizes, Compressed Air Hose (CAH) has inner tube of Nitrile synthetic rubber, wire and fiber reinforcement, and outer fiber braid cover. It handles pressures to 500 psi and air temperatures up to 158°F, and is also compatible with petroleum base hydraulic fluids, lubricating oils, and antifreeze solutions in temperatures from -10 to 235°F; polyol ester fluids up to 175°F; and water, water/oil emulsion, and water glycol fluids up to 185°F.

Flexaust Co., Inc., The
Warsaw, IN 46581
Jun 12, 2008 Featuring smooth inner surface to keep water flowing, Flexaust Saniflex(TM) Potable Water Hose is suited for OEM and aftermarket applications in RVs, motor homes, boats, yachts, and in food processing equipment. Offered in ¾ to 2 in. ID sizes, product is constructed from plastic helix supported PVC that is lightweight and flexible. Supplied in natural color with plain cut end finish, it comes in standard 50 ft lengths and operates over 120-180°F range.

Parker Hannifin Corp.
Cleveland, OH 44124-4141
Jun 05, 2008 Rated to 212°F for air and 185°F for water applications, 836-12 Push-Lok Plus has ¾ in. ID and is approved with HY Series crimp fittings as well as 82 Series field-attachable fittings. This multipurpose, heat-resistant hose can be used in low-pressure media applications, including diesel fuel, and has working pressure of 300 psi. Other applications include automotive assembly plants, power steering return lines, high-temperature case drains, and lubricating oils.

HBD Industries, Inc.
Vernon, CA 90058
May 19, 2008 VAPOR-LOC(TM) Tank Truck Hose is multilayered barrier that traps and prevents hydrocarbon fuel vapors from permeating through hose material, preventing degradation of hose reinforcement/cover materials. Offering full working pressures of 150-200 psi, it works in temperatures from -30 to +200°F. Full vacuum-rated hose is available in 1-4 in. ID and with smooth or corrugated cover. It is suited for use with trucks and in-plant operations to bulk transfer various caustic liquids.

Victrex plc / Victrex USA Inc.
Greenville, SC 29615
May 16, 2008 Optimized for chemical, thermal, and permeation resistance, PEEKline(TM) hoses incorporate liner tubes made from VICTREX® PEEK(TM) polymer and meet requirements of oil and gas offshore industry. Product has continuous-use temperature rating of 500ºF.

Purosil
Corona, CA 92879
May 07, 2008 Designed for combustion residue resistance, Purosil fluorocarbon lined hoses and elbows can withstand extreme temperatures. Using DuPont Viton elastomer, which can resist diesel fuel combustion byproducts as well as alcohols and fuel additives, FC lined hoses offer chemical bond between fluorocarbon liner and silicone rubber composite structure. Fluorocarbon hoses have continuous operating temperature of 235°C and low temperature capabilities down to -43°C.

NewAge Industries Inc.
Southampton, PA 18966
May 01, 2008 Silcon® Medical unreinforced tubing withstands temperatures from -100 to +400°F and is stocked in 22 sizes ranging from .012-¾ in. ID. Withstanding -80 to +350°F temperatures, braid-reinforced Silbrade® Medical hose is offered in 8 sizes from 1/8-1 in. ID. Both are translucent, peroxide-cured, and inert to UV, radiation, and ozone. Silicone elastomer meets USP Class VI and NSF-51 requirements, as well as FDA standards for use with food contact surfaces.

Flexaust Co., Inc., The
Warsaw, IN 46581
Mar 26, 2008 Reinforced with spring steel wire helix, Flexaust Flexadux® R-2 Hose comes in clear FDA-approved version and UL 94V-0 flame-retardant blue. All-purpose PVC hose has 0.020 in. thick wall and is available in standard sizes of 1.25-18 in. ID with lengths of 25 and 50 ft. Operating from 20-160°F, hose offers compressibility, as well as chemical and moisture resistance. Metric and custom sizes up to 24 in. ID can be provided.

Parker Hannifin Corp., Hose Products Division
Wickliffe, OH 44092 1797
Mar 04, 2008 Available in sizes from ½-4 in. ID, E-Z Form Hoses come in versions for oil-based and water-based fluids. Both are rated to 75 psi max recommended working pressure as well as for full vacuum or suction applications. Standard hose length is 25 ft, however lengths up to 130 ft are available. Hoses can be used where formed hoses were required because conventional industrial hose products were not able to bend tightly enough without kinking.

Flexaust Co., Inc., The
Warsaw, IN 46581
Feb 19, 2008 Designed to OEM specifications, Dayflex® MG-Stretch seamless, extruded, and overlapped hose features 3:1 or 5:1 stretch ratios depending on size and construction. Product is available in PVC or urethane and PVC blended compounds with coated wire to meet manufacturer requirements for stretch as well as resistance to chemicals and abrasion. Offered in 1¼-2 in. ID sizes and lengths to 50 ft, RoHS-compliant hose can be equipped with shuttle molded cuffs or end fittings.

Eaton Corp.
Eden Prairie, MN 55344
Feb 18, 2008 Available in 5 sizes, Series GH134 multi-refrigerant veneer hose features advanced internal polyamide veneer, synthetic rubber backing layer, stabilized braided synthetic reinforcement, and chlorobutyl rubber cover. Hose achieves low effusion values with R404a, HFC 134a, and R22 refrigerants, and features low moisture ingression characteristics which helps prevent refrigerant contamination. It is designed for use with roll-formed crimp fittings and Eaton's E-Z Clip Fitting System(TM).

Flexaust Co., Inc., The
Warsaw, IN 46581
Jan 11, 2008 Designed to keep extreme temperatures inside, Flex-Vest® Insulated Hose features 1 in. fiberglass R-value=4 insulation sandwiched between double-ply silicone-coated fiberglass fabric inside layer, reinforced with spring steel wire helix. Outer layer is single-ply neoprene-coated polyester fabric, also reinforced with spring steel wire helix. Suited for industrial air movement and fume extraction, hose conforms to UL-94 and comes in 1-6 in. ID sizes and 12 ft lengths.

Flexaust Co., Inc., The
Warsaw, IN 46581
Dec 21, 2007 Compressible to facilitate installation, Flexaust® Dayflex® DFD-T Heater and Defroster Hose is made from thermoplastic rubber and reinforced with internal polypropylene helix. Pliable product operates from -40 to +225°F and meets FMVSS 302 flame standards, making it suited for suits heater, defroster, and ventilation applications in automotive, heavy-equipment, and marine fields. There are 8 sizes available from 1-4 in. ID in 25 and 50 ft lengths.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Nov 29, 2007 APFOS SS overbraided PTFE hose is constructed of virgin PTFE core, which provides non-restrictive flow and inert surface to transport critical fluids, overbraided with series 300 SS wire. Product is offered with white or conductive black PTFE fluoropolymer cores in smooth or convoluted styles, as well as silicone jacketed hose available in smooth or convoluted white cores. Hose sizes range from 1/4-4 in. nominal ID, depending on style.

Norwalk Equipment Corp.
Norwalk, OH 44857
Nov 29, 2007 Designed for electric hot water heaters only, Sediment Suction Kit has 2 nozzles with adapter that fits both. Nozzles are inserted into bottom heater element port, while shop vacuum is hooked up to adapter to suck out sediment. Kit cleans up to 24 in. diameter tanks.

Flexaust Co., Inc., The
Warsaw, IN 46581
Oct 30, 2007 Model Flexadux® T-7 flexible white thermoplastic rubber hose utilizes reinforced spring steel wire helix for use in applications requiring FDA acceptable hosing. Food grade hosing features an operational temperature range of -40 to 250°F, smooth interior for airflow efficiency, and abrasion, chemical, and UV resistance. Available in 2-12 in. I.D. standard sizes, custom sizes to 24 in., and in 25 or 50 ft lengths.

Kurt Mfg. Co. Hydraulics
Lyman, NE 69352
Oct 05, 2007 Kurt Tuff(TM) hydraulic hose is reinforced internally with 2 braided layers of high tensile steel wire, and has black, oil, and abrasion resistant synthetic outer cover. It is available in ¼ to 1 in. diameters and can withstand temperatures from -40 up to 250°F. Rated to 1 million impulse cycles, hose meets or exceeds requirements of SAE DIN 20023.

Flexaust Co., Inc., The
Warsaw, IN 46581
Sep 17, 2007 Flexaust Tiger Tail® Guide Hose features 2 leakproof polyweld cuffs and is adaptable to eye hooks, D-rings, clamps, and other guide rope attachment methods. Offered in 1½, 2, and 3 in. ID sizes in standard 3 ft lengths, crush-resistant polyethylene copolymer hose operates from -40 to +140°F, protecting hoses and equipment from abrasion. It is supplied in standard yellow and black and is available in custom lengths, colors, finishes, and sizes.

Parker Hannifin Corp., Hose Products Division
Wickliffe, OH 44092 1797
Sep 12, 2007 Eliminating need to manually bundle 2 hoses, Twin Tough Bonded Hoses come ready-to-use. Abrasion-resistant cover with smooth finish prevents dirt build up. Offered in 3/8 and ½ in. sizes, Model 451TC features 3,000 psi constant working pressure and 1-wire braided construction, while Model 471TC, designed with 2-wire braided construction, provides 5,000 psi working pressure in 3/8 in. size and 4,250 psi in ½ in. size. Both come in 25 and 50 ft lengths with ½ SAE 100R1/100R2 min bend radius.