New Hose Products

Silicone Hose uses color tracer lines for identification.

Color Braid Silicone Hose incorporates platinum-cured silicone elastomer, polyester braiding with tracer line, and outer layer of silicone. Colored braid helps differentiate between lines used for transfer and processing of fluids, air, or granular materials. Offered in ID sizes from 1/16-1 in., sterilizable/autoclavable hose features temperature range of -100 to 400Ã-

Blower Ventilation Hose features built-in storage pouch.

EDW Hose/Pouch is single-ply, PVC coated polyester duct with PVC wearstrip and enclosed wire helix. It can move large volumes of air, smoke, or fumes using portable and/or temporary ventilation blowers under positive air. Hose operates from -20Ã-

Static Conductive Hose can be used around explosive gases.

Suited for use where potential for static buildup in presence of explosive gases exists, EDW-SC PVC-coated, polyester duct has PVC wearstrip and enclosed wire helix with belted and cuffed ends. Flexible hose, manufactured using thermal welding and without adhesives, is compressible to facilitate storage. Conductive throughout, product provides resistivity from 1 x 105 to 1 x 1012 ohm and is...

Suction and Return Hose withstands high temperatures.

Constructed with 2 or 4 layers of spiral fabric reinforcement, Model 811HT also has helical reinforcing wire spiraled throughout fabric to prevent collapse under vacuum. Hose has Ã-½ SAE 100R4 minimum bend radius and suits vacuum applications up to 28 in./Hg. Able to operate in temperatures from -40 to +257Ã-ºF, product features oil-resistant synthetic rubber inner tube and oil- and...

Top Design Engineering Considerations For Optical Assemblies

In this eBook, we provide an overview of the design engineering considerations to keep in mind when planning the manufacture of an optical assembly.

Silicone Suction Hose resists kinks, crushing, and collapse.

Constructed of platinum-cured silicone elastomer, woven polyester fabric, and spiral stainless steel wire reinforcement, SilvacÃ-®'s purity and smooth hose surface results in unrestricted fluid flow. Hose is offered in 5 sizes from Ã-½-2 in. ID, with 12 ft lengths standard. Suitable for applications with suction and temperature variations, product handles temperatures from -80 to +350Ã-

PTFE Hoses prevent bacterial entrapment.

PTFE Flare-Seal(TM) Hoses feature PTFE liner, which passes through inside of fitting and is flared over face to provide 100% full PTFE coverage on all wetted surfaces. Chemical-resistant fittings can be provided on convoluted and smooth bore hoses with polypropylene braid, stainless steel braid, or stainless steel braid with platinum cured silicone cover. Offered in sizes from Ã-½-4 in. ID,...

Hose delivers 5,000 psi constant working pressure.

Model 781 features neoprene synthetic inner tube, 4 or 6 spirals of high-tensile steel wire reinforcement, and oil- and weather-resistant, black synthetic, MSHA-accepted rubber cover. It accommodates variety of petroleum-based hydraulic fluids and lubricating oils, water/oil emulsion, and water/glycol hydraulic fluids. No-Skive design allows hose to be crimped without removing cover. Hose meets...

TPR Tubing resists tearing and fatigue.

SupreneÃ-® TPR is constructed from polypropylene-based thermoplastic rubber and provides low-temperature flexibility. It is available in both industrial and FDA grades. Sizes available are from 1/8-Ã-¾ in. ID in 50 ft lengths and can be used with temperatures from -60 to 275Ã-

Fiberglass Hoses withstand high temperatures.

Silcone Fiberglass Hoses provide ventilation and fume removal in temperatures from -75 to 600Ã-

Hose is suited for routing in tight places.

Providing flexibility for high-pressure applications, 721 hose is constructed of neoprene synthetic rubber inner tube surrounded by 4 spiral layers of steel wire reinforcement. MSHA-accepted black synthetic rubber cover provides oil- and weather-resistance. Hose can be crimped without removing cover due to No-Skive design and handles up to 4,000 psi working pressure in sizes 3/8-1 in. ID; 3,000...

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.