Agilent Technologies, Inc
Santa Clara, CA 95051
Aug 13, 2008 Models N5161A and N5162A MXG ATE analog and vector RF generators are designed for R&D and manufacturing engineers who define, develop, and optimize wireless network and mobile communications test systems. Model N5161A provides CW and analog modulation, while model N5162A supports multitude of digital modulation types up to 6 GHz. Delivering output powers of +23 and +16 dBm with option 1EA, units offer specified ACPR performance of -71 dBc for single-carrier W-CDMA up to +5 dBm.

Aeroflex Laboratories
Plainview, NY 11803
Jul 01, 2008 With frequency range of 1 MHz to 3 GHz, Model 3020C PXI has wideband width modulation up to 90 MHz for broadband communications standards or multi-carrier test applications as well as RF output power from -120 to +6 dBm. It incorporates dual-channel arbitrary waveform generator for supplying complex modulated signals, and is supplied with 0.5 GB of memory supporting up to 128 M x 16 bit I and Q samples. The 3020C can perform high-speed switching in less than 250 µs when in list mode.

AnaPico AG
Zürich   Switzerland
Jun 10, 2008 With 0.001 Hz resolution, APSIN3000 CW signal generator has frequency range of 9 kHz up to 3.3 GHz. It offers RF power that is settable from -50 to +13 dBm, and phase noise as low as -125 dBc/Hz at 1 GHz and 20 kHz offset. Able to perform simultaneous frequency and power switching in less than 2 ms, 2.5 kg unit allows remote access via its LAN interface. Generator operates with stable temperature compensated 100 MHz reference (OCXO) and can be phase-locked to external reference.

NuWaves Engineering
West Chester, OH 45069
Mar 28, 2008 Operating at 6 Vdc, Model RF2-3000UCV1 multi-octave upconverter features IF input ranging from 2-70 MHz to provide RF upconversion between 2 MHz and 3 GHz with gain flatness under 2 dB for specified spectrum. It has 50 dB of attenuation control with incremental steps of 0.5 dB and 5 kHz frequency step size. Packaged in ruggedized aluminum enclosure measuring 1.0 x 2.5 x 3.5 in., unit can be used in variety of applications, and also on bench as stand alone RF signal generator.

Saelig Co., Inc.
Pittsford, NY 14534
Mar 17, 2008 Designed for modulated-signal test procedures, TGR RF Generators offer high frequency accuracy, wide dynamic range, low phase noise/leakage, and flexible modulation capabilities. Model TGR2050 covers 150 kHz to 2 GHz in 10 Hz steps, and incorporates AM, FM, and phase modulation capabilities, while Model TGR1040 covers 10 MHz to 1 GHz in 1 kHz steps, and incorporates FM modulation only. Both can be operated using numeric/rotary controls, and can also be remotely controlled.

T & C Power Conversions
Rochester, NY 14610
Feb 07, 2008 Model AG 1010-2HF RF Generator is suited for applications in plasma markets including etch, thin film, deposition, and existing drop-in replacement markets. It includes 7-position built-in switch-selectable impedance transformer, RS232 communication ports, and front panel control of amplifier and generator functions. LCD digital front panel metering provides user with FWD, REV, and LOAD power measurement accuracy better than ±3%.

Advantest America Corp.
Santa Clara, CA 95054
Nov 01, 2007 Designed for OPENSTAR® T2000 test platform, 12 GHz Wideband Signal Generator/Analyzer features 32 RF signal I/O ports per module. It offers 16-device simultaneous testing of RF devices consisting of 4-8 ports, and supports 4-device parallel testing or 16-port multi-band RF devices. By using module in combination with existing 800 Mbps digital, 500 mA DPS, and base-band waveform digitizer generator modules, all RF SoC device signal tests can be conducted on single test system.

T & C Power Conversions
Rochester, NY 14610
Sep 26, 2007 Housed in half rack package, XX Series can be controlled manually or via computer-controlled, rear panel analog or digital interfaces. RF stability of output power circuitry gives user control accuracies down to 1 W scales. Featuring ac inputs with Power Factor Correction, generators meet Safety Standards EN/UL 61010-1. Multiple units can be installed side by side in any enclosure or 19 in. equipment rack.

T & C Power Conversions
Rochester, NY 14610
Sep 26, 2007 Supplied in half-rack package, XX Family RF Plasma Generator Series incorporates technology that streamlines internal electronics to efficiencies over 80%. Design lets users control operating parameters manually or via computer-controlled rear panel analog or digital interfaces. Meeting Safety Standards EN/UL 61010-1, series features AC inputs with PFC. Smooth RF stability of output power circuitry enables control accuracies down to 1 W scales.

NeuroTherm Inc.
Middleton, MA 01949
Aug 01, 2007 Model NT500 offers conventional and pulsed RF lesion settings, allowing pain management physicians to choose best therapy for patients. It also provides standard sensory and motor nerve stimulation settings for verifying sensory and motor nerve location. Weighing less than 15 lb, compact generator can fit on small tray in procedure room.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Jun 25, 2007 Model 2910 RF v2.0 internally generates any signal with up to 40 MHz of modulation bandwidth and signals greater than 400 MHz using external I-Q inputs. It features continuous tuning capability from 400 MHz to 2.5 GHz. Model 2910-DIG option lets users create multiple permutations of digital modulation signals including ASK, FSK, PSK, and QAM, each with user-selectable symbol rates, filter types, and data types, while 2910-GPS option simulates coded L1 signal of GPS satellite.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Dec 01, 2006 Featuring 6.5 in. TFT color screen and USB connectivity, Model N9310A covers full range of modulation types, including AM, FM, phase modulation, pulse modulations, and optional IQ modulator. With external IQ source, unit can generate various types of signals such as GSM, CDMA, and OFDM as seen in digital communications systems. Signal generator is suited for consumer electronics manufacturing, R & D, service installation and maintenance, and educational teaching labs.

Advanced Power Technology
Bend, OR 97702
Mar 31, 2006 Housed in flangeless T3 package, Model ARF475FL uses 2 die configured for push-pull operation and is capable of 1,000 W pulsed output and 300 CW at up to 150 MHz. To obtain high power dissipation, backside of package is lapped to mate with system heat sink. Coplanar lead arrangement facilitates circuit layout and provides over 2,500 V isolation between any terminal and mounting surface. Applications include MRI, CO2 Laser RF sources, and RF Plasma generators.

Amplifier Research Corp.
Souderton, PA 18964 2412
Dec 04, 2002 EM Test Model CWS500D immunity tester contains signal generator, directional coupler, power amplifier, controller, and Windows-based operating software for Automotive, Telecom, and Military applications. Includes GPIB (IEEE 488.2) interface that permits connection of external dual channel power meter for measuring forward power and for monitoring injected RF current. Uses 100 W RF amplifier with frequency response of 10 kHz to 400 MHz.