|
|
Advertisement
|
|
Electrical Equipment & Systems ->
Electrical Boxes
Electrical Boxes
(Showing headlines 21 - 40) 1 2 3 4 5 6 7
|
 Wall-Mount Enclosures protect electrical equipment.Fibox Enclosures
Glen Burnie, MD 21061
Sep 11, 2008
Offered in 7 sizes from 6 x 6 x 4 in. to 18 x 16 x 10 in., ARCA(TM) enclosures are available with optional mounting flanges that allow wall mounting in portrait orientation or landscape orientation. Enclosures come standard with wall mounting feet and are manufactured using injection molded polycarbonate to protect electrical and electronic equipment in industrial applications. Available with opaque or transparent covers, products are UL-Listed and NEMA rated Type 4/4X/12/13.
|
Conduction-Cooled VPX Enclosure has no-tool board changes.PCI Automation Inc
Antioch, CA 94509
Sep 03, 2008
Offering COTS modular chassis for VPX/VME/CPCI/CPCIe, ARINC600-ATR enclosures enable accelerated development of rugged conduction-cooled, embedded systems for airborne applications. Products are offered with interchangeable backplane-bus versions, and each slot has its own rear I/O PCB to facilitate definition and testing of custom wiring. This setup can be exchanged with custom rear I/O PCB set. Loaded via front, boards are fixed in place with self-clamping wedge locks.
|
 Enclosures are made from injection-molded polycarbonate.Fibox Enclosures
Glen Burnie, MD 21061
Aug 28, 2008
Offered in 18 x 16 x 10 and 16 x 14 x 8 in. sizes, chemical resistant ARCA(TM) Series Enclosures come with opaque/transparent covers. Featuring overlapping design and rugged construction, they are UL listed and NEMA rated Type 4, 4X, 12, and 13. Mounting plates as well as fixed and hinged inner panels are available in either metal or non-metallic versions, while enclosure latches can be metal or non-metallic and are available with or without padlock option.
|
 Fireproof Boxes protect electrical systems in emergencies.Altech Corp.
Flemington, NJ 08822
Aug 08, 2008
With halogen-free duroplastic construction that eliminates potential for metal-induced short circuits, Altech® fireproof enclosures can sustain flame protection up to 90 minutes in accordance with DIN 4102 Part 12, and offer ingress protection (water leaks) to IP 54 or IP 66. Rugged and shock-resistant units are available in wide range of sizes with 3-, 5-, or 8-pole terminal blocks, depending on model. All versions are self-extinguishing and can be lead sealed.
|
Weather Resistant Cover protects standalone access control units.Safety Technology International
Waterford, MI 48327
Aug 05, 2008
Constructed of clear polycarbonate and open on the under side, Model STI-6528 Bopper Stopper protects standalone access control units, electrical outlets, digital keypads, pull stations, and push buttons against both vandalism and accidental damage. Measuring 3.55 x 4.15 x 2.37 in., cover comes complete with screws and gasket for ease of installation.
|
Retrofits extend use of branch circuit monitoring system.Power Distribution, Inc.
Richmond, VA 23223
Jul 21, 2008
Designed to fit on top of any manufacturer's power distribution unit, J Comm(TM) Retrofit for PDUs integrates branch circuit monitoring system and split core or solid core CT strips for up to 168 breakers. J Comm(TM) Retrofit for remote power panels fits on top of any manufacturer's power panel and integrates BCMS product and split or solid core CT strips for up to 168 breakers. J Comm(TM) Under floor Enclosure can be used for any installation including equipment already in field.
|
Electrical Boxes meet ratings for EMI/RFI, NEMA, and IP65.Bud Industries, Inc.
Willoughby, OH 44094
Jun 26, 2008
Manufactured from ADC-12 die-cast aluminum alloy, ANS Series boxes feature 0.098 in. thick walls for use in heavy-duty applications. They include dual-channel gasketing, with 1-piece molded outer silicone gasket for sealing and second gasket made of wire-mesh with sponge rubber. Captive cover assembly screws are located outside sealing area. Boxes have recessed area on cover surface available in natural finish or smooth black powder-coat finish.
|
Junction Bricks connect multiple devices on fieldbus trunk.TURCK, Inc.
Plymouth, MN 55441
May 21, 2008
Vertical mount JRBS junction bricks for FOUNDATION fieldbus(TM) are available with 4, 6, 8, 10, or 12 ports and feature removable terminals located on both sides of brick. Units provide short circuit protection for all ports, as well as visual status with bright LED indicators located on each spur. DIN-mounted vertically or horizontally, they are also available with optional overmolded, pluggable terminating resistor for use with 3-pole terminal blocks.
|
 Wind Power Junction Boxes have roll back lid for easy access.Highline Products
Waltham, MA 02154
Apr 30, 2008
Constructed of one-piece fiberglass, Wind Power Junction Boxes are collection system cabinets for wind farms with lid that opens over 90° and features 2 wind lock hinges. Units are rated for 35 kV and offer removable front panel option for serviceability and cable terminations. Suitable for direct burial or pad mounting, boxes meet ANSI security requirements and incorporate munsell green 2-coat finish with UV inhibitors. Sizes range from 55 x 53 in. up to 85 x 63 in.
|
 Serial Lock-Out Relay provides remote trip and reset.Electroswitch, Unit Of Electro Switch Corp.
Weymouth, MA 02188 2913
Apr 14, 2008
Available in 3, 5, or 8 decks, Series 24 addressable network device delivers trip-coil monitoring, IRIG-B sequence-of-events reporting, system battery monitoring, self-diagnostic reporting, and 2 auxiliary monitoring inputs. Unit frees up RTU points, minimizing point-to-point wiring and facilitating load-shedding. Equipped with manual reset handle for Lock-Out Relay local control, SLOR is rated 30 A/600 V continuous with circuit-breaker coil providing ability of 95 A/125 Vdc.
|
Junction Box Modules support up to 62 nodes per network.Pepperl+Fuchs
Twinsburg, OH 44087
Apr 08, 2008
Designed for AS-Interface 3.0 scanners and gateways, VBA-4E4A Modules measure 1.128 in. high and deliver 4-in/4-out functionality. All I/O is powered directly by AS-Interface module, eliminating need for additional sources of power. Intended for use with 2- or 3-wire type sensor inputs or dry contact pushbuttons, modules include Dual Lock(TM) mounting strips, removable terminals, and LED indicators that help debug and troubleshoot programming issues.
|
Temporary Panel Covers provide electrical safety.Grace Engineered Products, Inc.
Davenport, IA 52807
Mar 31, 2008
Designed to meet OSHA standards, TempCovers(TM) provide safe access to electrical panel that is being serviced by qualified worker. Units also provide necessary signage that indicates dangerous high voltage risk. Featuring non-conductive, shock-reducing magnets, UL-classified covers can be attached by electrician in seconds.
|
 Junction Box Assembly suits mass transit applications.ITT Electronic Components
Santa Ana, CA 92705
Mar 19, 2008
Approved to IP66 standards, VEAM junction box assembly contains complete harnessing system, including terminal blocks, cables, and electrical components. It is designed for control switchboard connections between vehicles, tilting systems, CCTV equipment, inter-vehicle connections, power and signal connections, and motor supplies up to 660 A. Power and signal contacts on components are rated to 400 A, and complete system is tested to electrical, shock, and vibration specifications.
|
 Fire Alarm Boxes and Fittings provide visual identification.Bridgeport Fittings, Inc.
Stratford, CT 06497
Mar 13, 2008
Available in variety of sizes, Red Steel Fire Alarm Boxes and Fittings withstand harsh environmental conditions. Boxes are designed for use with Red(TM) connectors and couplings. Set screw connector joins red EMT to box, while set screw coupling joins 2 lengths of red EMT. Both concrete-tight fittings are furnished with Tri-Drive slot/Phillips/Robertson head screws and can be used for emergency circuits and security system applications, as well as fire alarm systems.
|
 Outlet Boxes and Covers help identify fire alarm circuits.EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Feb 20, 2008
Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 ˝ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without contacting mounting surface. Standard flat ground tapped holes are also available.
|
Power Distribution Cabinet delivers high voltage to racks.Emerson Network Power
St. Louis, MO 63136
Feb 01, 2008
Offered in 480 V model, rack-sized Liebert FDC(TM) remote power distribution cabinet offers flexibility to adapt to requirements of high-density servers by distributing UPS output directly to them. Because it can be placed in rows with racks, cables can run directly beneath racks to ensure they do not impede airflow. Offering 84 poles in stand-alone unit with 19 in rack-sized footprint, solution has various panelboard options as well as local and remote power monitoring capabilities.
|
Power Distribution Rack offers integrated diagnostics.Hewlett Packard
Houston, TX 77269-2000
Jan 30, 2008
Delivering power distribution at row level, HP Power Distribution Rack can provide 400 A redundantly. Fully redundant inputs and outputs provide dependable power while protecting IT hardware with commercial grade circuit breakers, while individual branch circuit monitoring and redundant management modules provide status and power consumption of each attached rack. Supplied in one HP 10000 G2 42U rack, solution features 3-phase power feeds and redundant 42-pole circuit breaker panels.
|
Weatherproof Covers protect electrical devices.Pass & Seymour/Legrand
Syracuse, NY 13221
Jan 24, 2008
Utilizing standard wall plate, Flush Mount Weatherproof While-In-Use Covers are suitable for receptacles, GFCIs, switches, and turnlocks. Units feature corner hinge that allows vertical or horizontal mounting without field modifications, and rectangular wall cut-out with built-in template. Mounting flange is tapered and textured, with large open areas to optimize stucco adherence. With NEMA 3R ratings, covers meet 2008 NEC requirements for outdoor wet locations.
|
Industrial Connection Boxes feature pinout standardization.Datalogic, Inc.
Hebron, KY 41048
Jan 21, 2008
Including Models CBX100 and CBX500, CBX Series industrial connection boxes are designed to facilitate installation, configuration, and maintenance of Datalogic code readers. Units feature accessible through-holes for mounting screws, optional Backup module that simplifies backup and restore procedures, and accessible spring clamp for easy cabling operation. Optional adapters are available for fast fixing to Bosch profiles and DIN rail mounting.
|
 Industrial Enclosures promote reliable networking.Rittal Corporation
Springfield, OH 45504
Nov 19, 2007
Housing sensitive networking equipment in plant floor environments, enclosures can be individually configured to suit specific requirements with range of accessories. They are available in carbon steel wallmount and freestanding designs to promote manufacturing environment networking efficiency and security monitoring capabilities. Available products include RiLAN junction boxes and RiLAN bus enclosures, each of which is offered in various versions.
|
(Showing headlines 21 - 40) 1 2 3 4 5 6 7
|
|
|
|
 |
ThomasNet News Advertisers
|
 |
|