Thomas & Betts Corp.
Memphis, TN 38125
Oct 30, 2002 Union? dual-voltage, non-metallic boxes support switch/outlet power devices and provide low voltage bracket with cable support that retains cable during/after installation. Equipped with side-mounting bracket, SB-21-DV models mount to face of wood or steel stud and have 20.5 in.? wiring capacity. Suited for retrofit work, E-18-4-DV models offer 2 old-work swing brackets and ears and have 18 in.? capacity. Both boxes are constructed of PVC and are UL listed.

Adalet
Cleveland, OH 44135 3301
Sep 12, 2002 CN Series Increased Safety Control Enclosures house electrical equipment that will not generate arcs or sparks during normal operation. They also house equipment in which surface temperatures are controlled below incentive values. Able to resist impact, enclosures prevent possibility of excessive heat and ingress of water or dust. They are available in stainless steel 316L and 304 and polyester powder-coated carbon steel in sizes from 12 x 24 x 6 in. to 60 x 36 x 20 in.

Haewa Corp.
Norcross, GA 30093
Aug 14, 2002 SN wall mount enclosures are equipped with foamed-in-place gasketing, 180° metal hinges, reversible doors, 8 mm tamper resistant locks, and weather resistant epoxy-polyester powder coated finish. Pre-gasketed cable entry plates are removable from inside only. Galvanized mounting plates provide ground and shielding. Single door enclosures are rated Nema 4, 12, 13/IP669; double door enclosures are rated Nema 12, 13/IP559.

Weidmuller, Inc.
Richmond, VA 23236
Aug 05, 2002 SAI Combi connects up to 16 I/O points to Profibus DP and CAN Open bus systems. Sensor box is rated IP 67 or NEMA 6 for harsh environments. System includes two 8-channel SAI-M8 sensor boxes with M16 circular, homerun connectors that plug into one active bus-enabled base. Sensor boxes fit industry-standard drill profile. Homerun cables are made from flexible C-Track compatible cables. Cables, cordsets, and field attachable plugs and sockets are available.

Weidmuller, Inc.
Richmond, VA 23236
Aug 01, 2002 Model SAI 1:1 4-port junction box solves emergency stop-loop wiring problems or can be used for PT 100 3- or 4-cable initiators. It features standard screw-type M12 connectors with 5 floating contacts. Each connector pin is rated for 2 A per contact and total current of 8 A. Unit is supplied with field-attachable hood with protective cable glands for control-cabinet wiring, with screw clamps that can be custom configured to application.

Hoffman
Anoka, MN 55303 7504
Jul 02, 2002 PBG enclosures mount 22.5 mm pushbuttons and devices, including Allen-Bradley 800E series, that require 2.25 in. center-to-center spacing between holes. Enclosures are available in 13 sizes, and in 13 steel and 7 stainless steel models.

TURCK, Inc.
Plymouth, MN 55441
Jun 18, 2002 Top Mount multibox® 4 and 8 port junction boxes use industry standard M12 connector for device wiring and M23 connector for quick disconnect homerun cable. Homerun connector options include 12 or 19 pin right angle or straight molded cordsets. Operating current is 4 A/port, 8 A total for the quick disconnect homerun cable style, and 9 A total for molded homerun cable styles. Operating voltage is 10-48 Vdc and housings offer IP 67 protection rating.

TURCK, Inc.
Plymouth, MN 55441
Jun 18, 2002 Miniature eurofast® M12 molded junction boxes are available in 4 pin single or 5 pin dual outputs per port with optional power and signal LEDs. Four pin model uses M12 thread size homerun connection for power to box and 5 pin model uses M16 thread size connection. Both models offer integral cable as option. Homerun connectors are available in straight or right angle styles with high-flex PVC or PUR cable construction. Operating voltage is 10-48 Vdc.

Thomas & Betts Corp.
Memphis, TN 38125
Jun 11, 2002 Steel City? Outdoor while-in-use and Red-Dot Codekeeper? in-use covers meet 2002 NEC Code 406.8(B) for outdoor weatherproof applications. Steel City cover comes with clear Lexan? cover, allowing unobstructed view of device. Key-lock version is also available. Red-Dot Codekeeper cover is die-cast aluminum with integral locking tab. Both are UL-listed and CSA approved and are available in single and two gang covers.

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
May 30, 2002 All-In-One Lockout Wallplate is designed to lockout switched loads in either the ON or OFF positions. Riveted bracket allows up to 5/16 in. dia padlock to be used for lockout of standard toggle switches or motor starting switches. Single-gang configuration is constructed of non-magnetic, corrosion-resistant 302 stainless steel. Wallplate has 2 tamper-resistant spanner head screws and mini-spanner head driver.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division
Milford, CT 06460
May 24, 2002 DRUB DIN Rail Utility Box can be ordered with 15 or 20 A duplex receptacle, 15 A isolated ground receptacle, 15 A GFCI receptacle, or 15 A TVSS receptacle. It has gray enclosure, faceplate, and receptacle. Options include 5 A circuit breaker that eliminates need for separate fusing or circuit breakers in control cabinet. Pre-wired kits are available for custom receptacle requirements. Box comes with removable inserts on all four sides.

SICK, Inc.
Bloomington, MN 55438
Apr 25, 2002 i1000 Series uses trapped-key transfer system, is encodable with different access rights, and cannot be forced open. i1001 Lock and i1002 Lock with solenoid release provide dual-channel safety switching and are recommended when access time is less than machine stop time. i1001 and i1002 without solenoid release offer dual-channel safety circuit and provide protection for applications whose access time is greater than machine stop time.

ASCO (Automatic Switch Co., Valve Div.)
Florham Park, NJ 07932
Apr 24, 2002 Junction box meets electrical wiring requirements of hazardous locations, eliminating need to use separate explosion proof splice box for solenoid wiring terminations. Enclosure passes UL and CSA requirements for wiring in type 7 and 9 environments. It also offers corrosion protection for washdown and caustic areas.

TURCK, Inc.
Plymouth, MN 55441
Apr 10, 2002 Terminal Chamber multibox(R) uses one M12 connector to attach to device, and offers either screw terminals or cage clamps. It is available with 4 or 8 ports, dual output per port, and either die-cast zinc with EMC cable gland or industrial hardened plastic (PBT) with jumper option. Minimum current rating is 10 A, with maximum of 12 A for 4-port and 16 A for 8-port versions. Both versions offer 3 A per port rating, and voltage range of 10-30 Vdc.

Crenlo, Inc.
Rochester, MN 55901 2573
Mar 12, 2002 Emcor(R) isoNet has 1/4 in. steel floor plates and top members, and 11 gauge steel uprights, providing sturdy mounts for 19 in. networking and data transmission equipment. Shelves can be single or double, and solid or vented for cooling. Patch cord cables can be organized and routed through horizontal-mounted cabling panel or wide, deep tray. Cable channels can be used to route cables between open frame racks or to join racks side by side.

Adalet
Cleveland, OH 44135 3301
Jan 11, 2002 HV Series High Voltage Junction Boxes are available in stainless steel 316L and 304 and polyester powder-coated carbon steel. Enclosures resist impact and prevent possibility of excessive heat and ingress of water or dust, preventing explosions. 1 x 1 Connection Series is for shielded or unshielded cables up to 8kV at 500A, while 2 x 2 Connection Series is for 2 parallel, unshielded cables up to 2kV at lkA total.

Siemon Co., The
Watertown, CT 06795
Nov 29, 2001 Mount-it Wall Box Locator helps contractors and installers properly and consistently align electrical boxes in new construction, or co-locate telephone/data boxes next to electrical boxes. To use, attach unit to piece of standard 1/2-in. EMT conduit, adjust thumb screws to set depth and height, attach electrical box, align it with stud, and secure in place. It works with plastic or metal, single- or double-gang electrical boxes.

ERICO, Inc.
Solon, OH 44139
Nov 08, 2001 Caddy® FMBS 16 Floor Mount Box Support positions electrical box centers 16 in. above the floor. It allows mounting of 4 in. or 4-11/16 in. boxes 1-1/2 or 2-1/8 in. deep. Plaster rings can be mounted for low voltage applications. Mountable inside (using mounting tabs) or under floor tracks, independent of wall stud location, FMBS 16 includes built-in far-side back support for 2-1/2, 3-1/2 and 4 in. metal or wood studs.