LEVITON    Melville, NY 11747
Feb 13, 2012 Available in 2 styles, Universal Dimmers offer single lighting control capable of properly dimming next-generation lighting sources while remaining backwards compatible with current bulbs. SureSlide® features contemporary rocker switch, while IllumaTech® offers traditional pushbutton switch and slide bar. On/Off preset function preserves selected dimmer setting. Offering single pole or 3-way lighting control, devices fit into standard wallbox and are suitable for multi-gang installations.

Semiconductor Circuits, Inc.    Atkinson, NH 03811
Feb 13, 2012 With input range of 18-75 V, Model CPTXX36 offers 3 output voltages of 3.3, 5, and 12 V. Five volt model has full load efficiencies of 90% at 48 Vin and 91% at 24 Vin, which allows full rated power at 70°C and 100 lfm airflow at 48 Vin. Measuring 1.3 x 0.9 x 0.374 in., open frame, 16th brick unit is compliant with DOSA footprint and interface standards. Converter offers fixed-frequency operation; auto-restart OVP, OCP, and OTP protections; remote sense; and ±10% output voltage trim.

Binder-USA, LP    Camarillo, CA 93012
Feb 13, 2012 Prewired with 18 gauge, 200 mm long leads suited for industrial and automation applications, M12 A-coded panel-mount receptacles can conduct up to 8 A per contact and 250 V per connector. Each receptacle has PG9 mounting thread and is available with 4 or 5 gold-plated contacts. For protection from liquids and debris, power connectors are sealed to IP67. These products will mate with Binder M12 A-coded male and female cable connectors to form complete connecting system.

Holophane    Granville, OH 43203
Feb 13, 2012 Offered with Classic or Premier prismatic borosilicate glass optics, GranVille® II luminaires have optical design that provides HID light levels with minimal glare, uplight, and light trespass. Multiple lumen packages are available, and fixtures may be ordered with asymmetric or symmetric distributions. In addition to dedicated thermal management system, features include cast aluminum housing choices, including 2 utility and 4 standard; up to 40°C ambient operation; and trim options.

LEDtronics, Inc.    Torrance, CA 90505
Feb 13, 2012 Drawing 0.8-0.91 W, BF3126 and BF3127 Series are comprised of miniature, solid-state, sunlight-visible, bayonet-base, 6- or 7-LED cluster lamps that provide pure wavelength light for uniform illumination. Both field-replaceable series, with 120° viewing angle, are socket and circuit compatible. Colors include Super Blue (470 nm), Aqua Green (525 nm), Lime Green (570 nm), Super Yellow (595 nm), Super Orange (612 nm), Ultra Red (660 nm), Cool White (8000K), and Warm White (3000K).

Larson Electronics, LLC    Kemp, TX 75143
Feb 13, 2012 Battery-powered and mounted to any standard industrial blasting gun, BLG-LED-4 is certified Zone Zero for use in Class 1 Division 1 areas and Class 2 Division 1 areas. Explosion proof unit includes quick-change tempered glass lens cover to protect light from damaging effects of blasting materials. Operating for 80+ hours on single set of batteries, light produces 90 lumens in concentrated beam. Nylon housing protects against impacts and enables watertight operation.

Intelligent-Appliance    natanya 42504  Israel
Feb 13, 2012 Providing 24 digital input channels, Model IA-3124-U is USB controlled and capable of transparently supporting tens of IA-3000 Series controllers, with current sink output of 1 A per channel at voltage range of 8-32 Vdc. Digital input range can handle 5 V logic as well. Equipped with dual watchdog protection, controller ensures solid operation in case of communication loss.

GE Co.    Southfield, MI 48034
Feb 13, 2012 Using Multilin HardFiber Brick IEC 61850 process bus merging unit in distributed bus protection architecture, Multilin(TM) B95Plus System provides 6 zones of 3-phase protection and supports up to 24 feeders. Field wiring is terminated directly at HardFiber Brick installed on primary equipment, and connectorized fiber optic cable between brick and B95Plus is only wiring across switchyard. Measurements and commands are transmitted to and from brick via IEC 61850 message formats.

W.A.C. Lighting Company    Garden City, NY 11530
Feb 10, 2012 Providing 15° spot, 26° narrow, and 45° flood beam spreads, Tesla(TM) High Output LED Downlights offer 2 and 3.5 in. apertures with up to 560 and 812 lumens, respectively. Units can be dimmed to 1% with electronic low voltage dimmer. Lights are available in Warm White 3,000 K color temperature with CRI of 85 or Neutral White 4,000 K with CRI of 82. Designed with die cast aluminum, low-profile trim, downlights operate on 120 or 277 V electrical systems and offer emergency battery backup option.

Supertex Inc.    Sunnyvale, CA 94619
Feb 10, 2012 Used for LCD backlighting, 3-channel HV9989 features PWM dimming control algorithm that regulates each channel's output current down to sub-µs dimming pulses. This permits dimming at frequencies outside audible range without shift in color correlated temperature. Powered by 40 V linear regulator, IC drives boost or SEPIC converters in continuous or discontinuous conduction mode. Three 1 MHz transconductance amps with tri-state outputs close feedback loops and accurately control LED current.

Powervation, Inc.    Palo Alto, CA 94301
Feb 10, 2012 Featuring Auto-Control® adaptive loop compensation algorithm, PV3101 single-output, single-phase, digital DC/DC controller uses DSP/RISC dual-core architecture with precision DAQ engine. Full differential voltage, current, and temperature measurements and 11-bit ADC are used to provide precision measurement; tight control; and accurate, real-time reporting of telemetry information for KPIs. Also, Green Modes(TM) technology reduces power losses during light-load operation and idle conditions.

Harting KGaA      Germany
Feb 10, 2012 Han-Modular® open connector system lets users put connector together to suit application requirements; 40+ modules are available for electric, optical, and pneumatic transmission. Also available, No. 362 Cat 6 Ethernet module exhibits mechanical stability and is executed as gender changer on socket side. Two Cat 6 solutions are available on male connector: field-installable version with RJ Industrial, and module that accommodates corresponding HARTING patch cables.

Harting KGaA      Germany
Feb 10, 2012 Han® Q 2/0 Series draws on Han C power contacts in cross-section range from 1.5-10 mm² or 16-8 AWG. Standard version carries 400 V rating at nominal current of 40 A, while high-voltage version has 830 V rating. Both are supplied in size 3A housings with up to IP67 protection. Despite different termination technology, connector pairs are naturally plug-compatible. Additional features include finger protected contacts and 16 coding options.

The MTL Instruments Group PLC    Hampton, NH 03842
Feb 10, 2012 Rated for use in harsh environments, including outdoor mounting, serial Model LS10 and parallel Model LS12 protect LED lighting from transients and surges generated by lightning and switching transients. Units feature Metal Oxide Varistor technology as well as high energy discharge tube technology with failure disconnect network. Offering fully automatic operation, devices provide protection for 120-347 V and 480 V systems.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Feb 10, 2012 Housed in single-slot, 0.8 in. pitch, 3U package, Model VPX55-3 supports inputs from +18 to +40 Vdc and provides up to 300 W of power with 6 outputs. Conduction-cooled unit includes option for MIL-STD-1275B transients for operation during +6 Vdc cranking conditions. Equipped with built-in EMI filter, power supply is suited for harsh land, air, and sea applications. Unit meets standard 3U VPX mechanical requirements and has VITA 62 compatible outputs and signaling.

Amphenol Corp., Amphenol Aerospace    Sidney, NY 13838
Feb 10, 2012 Available in shell sizes from 5-23, rugged connectors of 2M Series are intermateable and intermountable with existing micro-miniature, high-density connectors typically used in aerospace and defense applications. Each of 4 coupling styles offers consistent coupling torque on every connector, and devices withstand up to 37 g random vibration and 300 g shock. Offered in various platings, connectors can be internally filtered for radiated and conducted EMI.

WinSystems, Inc.    Arlington, TX 76011
Feb 09, 2012 With input voltage range of 10-50 Vdc, PCM-DC-AT Power Supplies work with 12, 24, or 48 V battery-operated or distributed DC power systems. Model PCM-DC-AT500 delivers +5 V output at 20 A, while Model PCM-DC-AT512 provides +5 V at 20 A, +12 V at 3 A, and -12 V at 0.5 A. Both operate from -40 to +85°C with no fans or heat sinks. Measuring 3.6 x 3.8 in., RoHS-compliant power supplies have no minimum load requirement to bring units into regulation.

Ideal Industries, Inc.    Sycamore, IL 60178
Feb 09, 2012 SLK(TM) Disconnect Fuse Kit de-energizes streetlights, parking lot lights, and electrical vehicle charging stations in event of knockdown to prevent potentially life-threatening shock hazards. Listed to UL ECIS category for special purpose connectors, submersible breakaway safety device withstands wet conditions around pole bases, junction boxes, and hand holes. Bright orange material - UL 94V-2 flame rated - features ribs on boots to provide grip and also facilitates identification.

Selco Products Co.    Reno, NV 89521-5908
Feb 09, 2012 With 20 A rating at 120/250 Vac, SWTC3 Series accommodates applications requiring thermal cut-outs with high current capabilities. Thermal cutoffs provide reliable upper limit temperature protection, functioning as safety devices to disconnect current to heating element in case of malfunction. Interrupting current rating is 31.5 A at 125/250 Vac, and functioning temperature range is from 162ºF to 464ºF, with holding temperatures from 117 to 392ºF.

Larson Electronics, LLC    Kemp, TX 75143
Feb 09, 2012 Model EPL-EMG-48-2L-LED fixture provides Class 1 Division 1 protection and instant on operation. Explosion proof light features housing constructed of non-sparking aluminum for durability and resistance to corrosion. Pyrex tubes protect LED bulbs against contamination and impact, while integrally mounted and automatically recharged battery backup system provides 90 min of light operation in case of power failures.