Wireless Amplifiers

Communication Systems & Equipment, Electrical Equipment & Systems, Mechanical Power Transmission

FCC-Certified 4G/LTE Amplifier increases in-building coverage.

March 31, 2016

Promoting increased connectivity within buildings/structures, HA72170-NF can capture weak cellular signal and strengthen it to provide clear calls and fast, consistent data speeds while also reducing dropped calls. This 4G/LTE booster can wirelessly connect >25 mobile devices and works with 2G/3G/4G networks on U.S. cell carriers. While AGC enables consistent coverage, integral LED control console lets user set operational mode, select band, and adjust gain of each frequency. Read More

Communication Systems & Equipment, Electronic Components & Devices

ULP Precision CMOS Op Amps deliver zero drift operation.

December 30, 2014

Targeting front-end amplifier circuits and power management designs, NCS325 and NCS333 offer respective quiescent currents of 21 and 17 µA at 3.3 V and enhance accuracy of motor control feedback and power supply control loops. Products, operating with 350 kHz gain bandwidth with peak to peak noise down to 1.1 µV from 0.1–10 Hz, provide rail-to-rail input and output performance and are optimized for 1.8–5.5 V operation. Max input offset voltage is 10 µV, and offset temperature drift is 30 nV/°C. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Machinery & Machining Tools

Wi-Fi Range Extender offers facilitated setup via touchscreen.

November 19, 2014

Boosting Wi-Fi® signals to cover up to 10,000 ft² by repeating and amplifying original signal of any Wi-Fi router, 5 in. wide x 5 in. tall TAP-EX can be setup within minutes and does not require other devices for such. Touchscreen UI lets user search for and select desired Wi-Fi network as well as control Parental Control features and other settings. Along with optional digital clock display, features include 2 additional wired ports for network devices and USB port for local file sharing. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices, Mechanical Power Transmission, Mounting & Attaching Products

KGP Logistics Adding Value to Wireless Market with CommScope

September 12, 2014

FARIBAULT, Minn. -- KGP Logistics is committed to providing enhanced, value-add solutions to the North American wireless industry via increased focus on delivering wireless solutions with an emphasis on customer support and reliable supply chain services. As a North American channel partner for CommScope, KGP Logistics has developed a robust stocking position of CommScope wireless product...Read More

Communication Systems & Equipment, Electronic Components & Devices, Test & Measuring Instruments

ANADIGICS to Showcase Innovative Wireless RF Solutions at IMS 2013

May 20, 2013

ANADIGICS to Exhibit Cellular, WiFi, and Wireless Infrastructure Products, June 4 - 6, 2013, at the International Microwave Symposium in Seattle WARREN, N.J. – ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that it will participate in the IEEE International Microwave Symposium in Seattle. The Company plans to showcase several innovative,...Read More

Communication Systems & Equipment, Electronic Components & Devices

ANADIGICS to Showcase Cutting-Edge 4G Solutions at IMS2012

June 26, 2012

ANADIGICS to Exhibit June 19-21, 2012 at the International Microwave Symposium in Montreal, Canada WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that it will participate in the IEEE International Microwave Symposium in Montreal, Canada. ANADIGICS plans to showcase several new high performance products at the event, including LTE...Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Display & Presentation Equipment, Electrical Equipment & Systems, Non-Industrial Products, Plant Furnishings & Accessories

AmpliVox Launches \"the 12 for 2012!\" New Product Line Up

June 4, 2012

Innovative New Products Expand Across Several Lines. NORTHBROOK, Ill. - AmpliVox Sound Systems, engineers, manufacturers and marketers of sound system technology, announced today "The 12 for 2012!" product line-up, a landmark expansion of its offerings by introducing 12 new products. The new products include elegant lecterns and podiums, high-tech public safety sound systems, and versatile...Read More

Communication Systems & Equipment, Electronic Components & Devices

Self-Containted Cellular Amplifier operates in 5 bands.

May 9, 2012

SureCall® Force-5 is self-contained, 5 band cellular amplifier for Verizon and AT&T LTE, T-Mobile AWS, and dual-band for 2G/3G/4G. It is designed for organizations with between 20,000-100,000 sq ft requiring consistent cellular connection for voice and data. It features adjustable dB gain, automatic oscillation detection and shutdown to prevent interference with cell phone towers. Amplifier is carrier-neutral solution with 1 box supporting all major carriers on variety of standards. Read More

Communication Systems & Equipment, Electronic Components & Devices

ANADIGICS Receives 2012 China ACE Award

March 9, 2012

ANADIGICS' ALT6738 HELP4(TM) Power Amplifier Selected as RF/Wireless Product of the Year WARREN, N.J.- ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that the Company has received the 2012 China Annual Creativity in Electronics (ACE) Award, presented during a reception held in conjunction with the 17th International IC-China Conference &...Read More

Communication Systems & Equipment

WiMax Amplifier is available for Sprint's 4G network.

January 13, 2012

Intended for Sprint's 4G WiMax network, SureCall® CM2500W consists of in-building, FCC-approved, 4G WiMax amplifier with 62 dB median gain and 65 dB max gain. It gives users optimum data download or upload speeds up to 2,000 ft² from amplifier's location, while adjustable gain allows users to fine-tune amplifiers and optimize performance. Read More

Communication Systems & Equipment, Health, Medical and Dental Supplies & Equipment

EEG Wireless Amplifier helps diagnose neurological diseases.

December 9, 2011

Consolidating variety of clinical and research features into single, portable unit, Nicolet(TM) EEG Wireless Amplifier captures high-resolution brain wave data for diagnosis and treatment of epilepsy, brain trauma, stroke, brain tumors, and sleep dysfunction. Real-time data from amplifier can be transferred wirelessly or in tethered mode and stored in on-board memory, allowing for continuous recording when patients are out of range of monitoring computer. Read More

Communication Systems & Equipment

The Innovation Leader in Cellular Amplifiers, Cellphone-Mate Inc., Ships First and Only FCC Approved 4G/AWS Amplifier

April 13, 2011

Reconfigurable AWS amplifier boosts the range and reception on calls on the AWS band. FREMONT, Calif. - Cellphone-Mate Inc., one of the leading providers of cell phone amplifiers and accessories, today announced that they are now shipping the industry's first and only aftermarket FCC Approved 4G/AWS (Advanced Wireless Service) band bidirectional amplifier, the SureCall(TM) CM2100 62db. ...Read More

Communication Systems & Equipment, Electronic Components & Devices

Ultra-Broadband Power Amp has extended frequency range.

January 19, 2009

With no warm-up or turn-on delay, CHPA0618-1-G45 provides 40 W typ saturated power across 5.85-18.4 GHz bandwidth. Ability to achieve solid-state power levels across frequency range is enabled by Spatium(TM) broadband spatial combining technology. This multiple-element architecture provides protection from single-point failures and facilitates even, dispersive, 3D heat dissipation. Other features include soft-fail in case of device failure, and flat gain without equalization. Read More

Communication Systems & Equipment, Electronic Components & Devices

Power Amplifiers are designed for 18-33 GHz frequency ranges.

September 29, 2008

Available in bare die or surface mount packaging, AMMC/P-6333 driver amplifiers target wireless communication infrastructure applications, including point-to-point radios, VSAT and fiber to the home. Fabricated using 0.25 um enhancement mode PHEMT technology, amplifiers deliver gain of 20 dB and P1dB of 23 dBm. With 50 W matching and third order intercept point of 30 dBm, they can be used with single positive voltage supply and DC power of 5 V bias at 220 mA. Read More

Communication Systems & Equipment, Electronic Components & Devices

HBT Amplifier targets WLAN and WiMAX applications.

April 25, 2008

Featuring 4.9-5.9 GHz operating range, 2 W Model SZP-5026Z is optimized for use as either final or driver stage in WiMAX equipment. Single-stage, Class AB, InGaP Heterojunction Bipolar Transistor amplifier delivers error vector magnitude performance of 2.5% at 25.5 dBm output power. Operating from 3-5 V supply, device includes internally pre-matched input and output, integrated input power detector, and 1,000 V Class 1C ESD protection. Read More

Communication Systems & Equipment, Electronic Components & Devices

Nitronex's Gan-on-Si Broadband Doherty Power Amplifier Enhances Efficiency and Bandwidth for Wimax Applications

October 17, 2007

Broadband WiMAX Doherty power amplifier reference design available... CHICAGO - WiMAX World USA, Booth 915, (September 26, 2007) - Nitronex, an innovative developer and manufacturer of high-performance RF power transistors for the commercial and broadband wireless infrastructure markets, has partnered with Prescient Wireless to design a GaN-on-Si broadband Doherty power amplifier for WiMAX...Read More

Communication Systems & Equipment, Electronic Components & Devices, Test & Measuring Instruments

New High-Speed Amplifiers from National Semiconductor's PowerWise Line of Energy-Efficient Products Provide the Industry's Highest Performance at the Lowest Power

October 9, 2007

Amplifiers Combine with National's ADCs, Clock Conditioners and Power Management ICs on Three Reference Design Boards Targeted at Wireless Infrastructure, Test and Measurement, and Defense and Space Applications SANTA CLARA, Calif. - September 24, 2007 - National Semiconductor Corporation (NYSE:NSM) today introduced three new energy-efficient, high-speed differential amplifiers that are...Read More

Communication Systems & Equipment, Electronic Components & Devices

ANADIGICS Ships 802.11n Power Amplifiers to NXP Semiconductor for WLAN Module Solution

October 3, 2007

ANADIGICS Supplies AWL6951 Dual-Band PA to NXP for Broadband Home Connectivity Market WARREN, N.J., Sept. 11 / -- ANADIGICS, Inc., announced today that the company is shipping production volumes of its AWL6951 Wireless LAN(WLAN) power amplifier(PA) module in support of the upcoming 802.11n multi-input, multi-output (MIMO) standard to NXP Semiconductor for their WLAN module solution, MRX2000....Read More

Communication Systems & Equipment

Powerwave Introduces 1900MHZ Tower Mounted Amplifier

August 23, 2007

Designed to enhance coverage and improve the uplink signal quality for RET antennas in UMTS and AWS networks, the TMA is also AISG compatible CTIA WIRELESS 2007, ORLANDO, Fla., Booth #2163, March 28, 2007 - Powerwave Technologies, Inc. (NASDAQ:PWAV), a global source for end-to-end wireless infrastructure solutions, today expanded its growing line-up of tower mounted amplifiers (TMAs) with the...Read More

Communication Systems & Equipment, Electronic Components & Devices

ANADIGICS Announces Production Shipments of WLAN 802.11n Power Amplifiers

February 15, 2007

ANADIGICS, a Leading Supplier of multi-band WLAN Power Amplifiers, Extends Leadership into 802.11n Platforms WARREN, N.J., Jan. 31 /- ANADIGICS, Inc. (NASDAQ:ANAD), a leading supplier of wireless and broadband solutions, announced today that the company is ramping production shipment of Wireless LAN (WLAN) power amplifiers (PAs) that support the upcoming 802.11n multi-input, multi-output...Read More