Eriez Magnetics    Erie, PA 16514
May 17, 2012 Offering edge-to-edge separation, electro-permanent EP-Rex(TM) Scrap Drum handles sphere-shaped ferrous (meatballs or knuckles) and delivers degree of strength that benefits scrap recycling operations. There is no transfer point drop in magnetic force, nor is there any decline in performance due to heat rise.

Russell Finex    Pineville, NC 28134
May 03, 2012 Available in 5 sizes from 10 in. lab unit up to 60 in. production scale unit, Russell Compact Sieves are used for safety screening of powders and liquid slurries. Design promotes transmission of vibration to mesh screen surface, while quick release toggle clamps facilitate disassembly and cleaning. Mounted on rubber suspension system, low-profile vibratory screeners operate at less than 70 dBA typ and can achieve throughput rates up to 60,000 kg/hr.

Kason Corporation    Millburn, NJ 07041
Apr 10, 2012 Offered in stainless steel and carbon steel with 72 in. diameter, Vibroscreen® Low-Profile Pressure Sifter removes oversize particles and is engineered to operate under pressure on batch or continuous basis. Connections to incoming line, discharge line for on-size particles, and discharge spout for oversize particles are sealed using pressure sleeve connectors. To minimize height requirements, sifter employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls.

L-Com, Inc.    North Andover, MA 01845
Dec 02, 2011 Available for DB9, DB15, and DB25 D-subminiature connectors, Y Adapters/Splitters each come with 1 male to 2 female connectors, wired 1:1 to evenly split signals. Units are fully shielded and have 30 µin. gold plating on contacts for repeated mating cycles. Made of rigid PVC, light gray molded casing maximizes longevity.

Kason Corporation    Millburn, NJ 07041
Nov 09, 2011 Centri-Sifter® model YOB-SS features cantilevered shaft with 2 externally mounted bearings between screening chamber and motor drive, allowing all components to slide freely from shaft end for accelerated cleaning, screen changes, and inspection. System comes in configurations for gravity-fed applications or continuous operation in-line with dilute-phase pneumatic conveying systems, with screen cylinders of Nylon monofilament, woven wire, perforated plate or wedgewire screen.

Eriez Magnetics    Erie, PA 16514
Sep 29, 2011 Used in vacuum and pressure pipelines, PN Metal Separators remove metal contaminants from pneumatically conveyed materials, plastic pellets, and regrind. Contaminants, even those encapsulated in pellets, are removed via reject mechanism that operates reliably at conveying speeds to ~4,000 fpm without interrupting flow. Modular design enables flexible adaptation to different conveying methods, and options are available to accommodate high temperature, abrasive, and powdery bulk materials.

Mini-Circuits    Brooklyn, NY 11235
Sep 01, 2011 Capable of operating up to 15 W, model QCS-83+ is 2-way 90° power splitter with 4,000-8,000 MHz range and typical unbalance of 0.8 dB and 4°. Microwave RF/IF power splitter combiner, supporting nearly octave band in miniature EIA-0805 form factor, features LTCC construction, which lends to effective use in transmit or receive paths.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Aug 19, 2011 Incorporating vertically mounted motor that induces sifting motion across screen plate, LA Low Profile Separator is suitable for sifting flours and starches. Frame is mounted on rubber isolators rather than springs used in conventional separators. Horizontal, high G motion maximizes capacity of undersize product passing through screen while allowing oversize material to exit separator. Featuring sanitary construction, separator meets needs of food/beverage and pharmaceutical industries.

Kason Corporation    Millburn, NJ 07041
Jul 19, 2011 Intended for food, dairy, pharmaceutical, and chemical applications, Centri-Sifter® features 3-bearing shaft that cantilevers for removal of internal components. External roller bearings located at motor end of shaft and on hinged cover at discharge end provide maximum support and vibration-free operation under heavy loads. Equipped with Clean-In-Place Spray Balls for rapid sanitizing using steam or cleaning solution, stainless steel unit is finished to industrial, 3-A, FDA, and BISSC standards.

Eriez Magnetics    Erie, PA 16514
Jul 12, 2011 Using ballistics to separate iron-rich ferrous from mixed metals and waste material in post drum magnet flow, Shred1(TM) Separator delivers 3 distinct fractions. Fraction 1, representing 60-80% of flow, contains less than .2% copper and does not require picking. Fraction 2 represents 20-30% of flow and contains mostly mixed metals, copper, and aluminum with steel housings or cores. Containing 5-7% of flow, Fraction 3 consists of heavy steel objects and light material, such as fluff and rubber.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jul 12, 2011 Available in 48 and 60 in. diameters with 5 hp motor, Super MX Separator delivers forces as high as 10 G and is suited for separating solids from liquids or segregating dry materials into various sizes. Machine utilizes conical construction rather than flat plates, which creates rigid geometric structure. Totally enclosed weight guard prevents reach-in injuries, while open base design allows for cleaning underneath unit, preventing dirt and product build-up.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jun 21, 2011 Supplied in open-manifold or Packed-Vessel configuration, SWECO® Hydrocyclone System provides fine particle separation for wet processing. Manifolds utilize 2, 4, 5, or 10 in. diameter cyclones while Packed Vessels contain either 1 or 2 in. diameter cyclones. Both configurations can process feed rates from 10-3,000 gpm, depending on size and number of hydrocyclones installed in system. Reliable operation only requires consistent feed at steady pressure.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
May 31, 2011 Placed upstream from Nilfisk CFM-brand vacuum, Nilfisk CFM Immersion Separator safely traps and retains dangerous Group E dust particles in neutralizing fluid bath. Unit is constructed of low-sparking materials and grounded components with grounding strap for added safety. Separator includes drain valve, antistatic wheels, and sight level tube to monitor liquid levels. Coalescent filters prevent passage of fluid droplets that have been agitated by working air from passing back to vacuum.

Russell Finex    Pineville, NC 28134
May 09, 2011 Designed for use on Compact sieves, 316L stainless steel magnetic separator helps ensure food and pharmaceuticals remain free from ferrous contaminants. Particles are attracted to and securely held on bars which can be wiped clean between batches. Number and placement of bars promote balanced coverage of open space and magnetic field strength without restricting throughput. Ferrite model achieves 4,500 Gauss, while rare earth options reach up to 14,500 Gauss.

Eriez Magnetics    Erie, PA 16514
Mar 31, 2011 Installed directly above material feed throat of extruder, injection molding or blow molding machine, Model CF removes both magnetic and non-magnetic metal contaminants from slow, downward moving column of material. Separator features automatic self-calibration and monitoring as well as adjustable scanning sensitivity and reject duration. Available in 4 pipe sizes from 2.9-5.9 in. diameter, separator discharges contamination into reject container with air-powered separating slide.

Kason Corporation    Millburn, NJ 07041
Mar 15, 2011 Vibroscreen® High Capacity, Two-Deck Classifier features 100 in. dia and classifies various bulk materials ranging from dry bulk solids to solids-laden slurries. Unit includes 2 horizontal screens in vertical, cylindrical housing, while clamps between screen frames enable interior access for inspection, screen changes, and wash down. Imbalanced weight gyratory motor affixed to housing generates vibration. Constructed of epoxy-coated carbon steel, unit can operate on batch or continuous basis.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Feb 17, 2011 BigMax(TM), with potential for 240 ft² of screen area in one machine, offers 12 ft of screen deck length to accommodate extended retention time and accurate separations of product. Functionality allows 1-4 separations in single machine, depending on desired deck configuration, and material can be fed at single point or independently to each deck. Also, screens can be replaced from either end of machine without removing ball trays.

Kason Corporation    Millburn, NJ 07041
Feb 07, 2011 Vibroscreen® Flo-Thru screener classifies bulk material by utilizing 2 screening decks and 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls. Top inlet and bottom outlet are vertically aligned, so smallest material passes through unit in straight path, and larger material is ejected through spouts at screen peripheries. Offered with diameters from 18-84 in., it also includes quick-disconnect clamp ring assemblies for removal of screen frames.

Kason Corporation    Millburn, NJ 07041
Nov 23, 2010 Flo-Thru Sanitary Sifter model K40-1FT-SS employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of unit, reducing overall height. Intended for filtering oversize particles as fine as 38 microns from dry bulk materials or solids-laden slurries, screener is offered in diameters from 18-84 in. Sifter has quick-release clamps that ease removal of screens and disassembly of frames, and oversize material exits through side discharge spout.

Kason Corporation    Millburn, NJ 07041
Jun 10, 2010 Used for screening pharmaceutical powders and other contamination-sensitive products, Ultra Sanitary Mini Centri-Sifter(TM) is constructed of stainless steel with continuous welds ground and polished to sanitary standards. Unit can be disassembled in less than 3 min, providing access to all material contact surfaces, and sanitized manually or in autoclave. Gravity-fed design features rotating helical paddles, cylindrical screens of various materials, and 2 discharge outlets.