Kason Corporation
Millburn, NJ 07041
Feb 27, 2009 Constructed of stainless steel and finished to 3-A, FDA, and BISSC standards, Centri-Sifter® Twin Centrifugal Screener can sift and scalp dry bulk materials, as well as break up soft agglomerates and dewater moist solids or slurries. Each screening chamber features sliding end cover and 3-bearing shaft that cantilevers for removal of internal components for sanitizing. Screener is suited for food, dairy, and pharmaceutical applications, as well as contamination-sensitive chemicals.

Bunting Magnetics Company
Newton, KS 67114 0468
Feb 13, 2009 Bolted directly to in-feed of processing equipment, High-Temp Machine-Mounted All-Metal Separator (MMS) is designed for choke-feed applications within plastics industry where product is at higher than normal temperature (up to 300°). Pneumatic rejection mechanism, aided by precise timing, results in accurate cycling and conservation of good material, while rugged housing and slide gate reject design eliminates contaminant leaks.

Supercritical Fluid Technologies, Inc.
Newark, DE 19711
Dec 12, 2008 Designed for research chemists and process engineers, Model SFT-2000 accommodates 2 vessels up to 1 liter capacity each or single vessel as large as 2 liters. Pressurization of carbon dioxide at flow rates up to 250 ml/min is possible with Peltier-cooled SFT-20 CO2 pump, which is self-contained and does not require external cooling bath. Integrated pre-heater guarantees temperature of fluid delivered to extraction vessel is consistent for repeatable results.

SWECO®, Div. of M-I L.L.C.
Florence, KY 41022
Dec 09, 2008 Sono-Wave(TM) fully digital ultrasonic system promotes optimal screen excitation throughout screen surface with even energy distribution. Generator is available in 100 and 200 W versions and can drive 2 screens simultaneously, eliminating need to use second generator in 2 deck applications. Ultrasonic converter mounts outside of separator, and with no cable or electrical components inside separator, unit can be configured to meet Atex Zone 20 standards.

JWC Environmental
Costa Mesa, CA 92626
Oct 30, 2008 Using woven wire panels or perforated plates with 0.5-6.0 mm openings, Drumscreen Monster(TM) removes unwanted solids and debris from flow of wastewater. External sprays, featuring adjustable on/off timer system, wash then flush organic material back into wastestream. Able to handle flow rates up to 12.5 million gal/day, screen works in front of membrane bioreactors (MBRs) and can also be used in headworks, sludge screening, and thickening as well as sluicing/screenings separation.

Eriez Magnetics
Erie, PA 16514
Oct 17, 2008 Built for 2 in. pipelines, ProGrade® Model L Ferrous Traps are designed to remove ferrous contaminants in operations where conditions are not too severe. Units feature non-sanitary cast bronze construction and can withstand pressures up to 150 psi. Ceramic powered separators remove small ferrous contaminants such as steel chips, hex nuts, and washers, while separators powered by Rare Earth magnet are best at removing weakly magnetic fine ferrous contamination.

Industrial Magnetics, Inc.
Boyne City, MI 49712
Oct 07, 2008 Pneumatic Housing incorporates series of 1 in. dia, 50 MgOe rare-earth tubes on staggered centers to ensure that all product flowing through housing makes repeated contact with magnets. Unit is suitable for processing dry, powder, granular materials, and can be used ahead of processing equipment and bulk load-out stations to ensure product purity and to protect machinery from tramp metal damage.

Industrial Magnetics, Inc.
Boyne City, MI 49712
Oct 06, 2008 Designed for ferrous metal separation in dry processing systems, Continuous-Clean Magnetic Drawer-in-Housing separator features magnetic tubes aligned on alternating centers for multiple row drawer configurations. It incorporates air-actuated stripper seal assembly that discharges collected tramp metal into leak-proof enclosure with discharge chute. With its in-stream design, unit can handle dry, free-flow powders and granular products.

Almco, Inc.
Albert Lea, MN 56007 2751
Oct 01, 2008 Designed to automatically separate fine particulate from water-based solutions in metal parts deburring equipment, self-cleaning Centrifuge Recycling System produces waste in form of clay-type material that is environmentally safe and has no special removal or disposal restrictions. Single-stage SSC-40 handles small vibratory finishing applications, while dual-stage DSC-40 provides higher efficiency cleaning. Both process up to 40 gallons of incoming liquid/hr.

Munson Machinery Co., Inc.
Utica, NY 13503
Sep 03, 2008 With few moving parts, self-cleaning Rotary Drum Screen contains rotating cylinder which is constructed of wedge wire screen with stationary doctor blade on outside of cylinder and internal spray line. Models are available with drums of 24 in. dia in 24, 36, 48, 50, and 72 in. lengths, and with drums of 36 in. dia in 96 and 120 in. lengths. With 200-1,000 gpm capacities, unit is intended for sewage treatment, pulp and paper, rendering, and pelletizing applications.

JWC Environmental
Costa Mesa, CA 92626
Aug 28, 2008 Available as optional feature on Finescreen Monster®, Bandscreen Monster®, Chain and Rake Monster®, and Catenary Monster(TM), Monster Blind Diagnostic System detects percent blinding factor of screen and notifies plant operational staff about screen performance. System detects heavy solids loading, need to adjust cleaning brush, or need to replace spray nozzle. It can also control additional cleaning steps, such as hot water spray wash, to optimize screen's efficiency.

Lee Company, The
Westbrook, CT 06498 0424
Aug 25, 2008 Constructed entirely of stainless steel, IMH Insert Style Screens protect critical fluid control components against rogue contamination in high-volume industrial and automotive applications. They use Lee Insert Principle of controlled expansion during installation to seal and lock screen in place. Available in 5.5, 8, 10, and 12 mm diameters, screens are rated at 125 microns absolute; other micron rated models are also available.

WS Tyler
Mentor, OH 44060
Aug 06, 2008 TYCAN HSG T-Class Vibrating Screen allows screen media to be blended, modified, and exchanged, optimizing wear life versus open area. Stroke and amplitude can be adapted to product without changing parts and reinforced structure promotes longevity of components.

Eriez Magnetics
Erie, PA 16514
Aug 04, 2008 Using ProSort and FineSort(TM), scrap handlers can recover nearly 90% of metals passing through scrap yard. Airless Prosort uses metal sensors aligned with electromagnetically driven paddles to separate valuable metals from waste. Able to recover metals less than 1 in. diameter, FineSort receives discarded fines that have passed through initial screening process and uses magnetic components to separate ferrous and non-ferrous metals from fines waste.

Pepperl+Fuchs
Twinsburg, OH 44087
Aug 01, 2008 Featuring programming screen and universal mounting options, Bebco EPS® 6000 Series Purge/Pressurization System can be used with enclosures up to 250 ft³. Purging system contains controller, pneumatic, electrical I/O, and programming interface with back-lit LCD in type 4X, IP66-rated housing. Suited for offshore, refinery, and pharmaceutical applications, IECEx, cULus, and ATEX directive certified system has exposed parts that are made of 316L stainless steel.

SWECO®, Div. of M-I L.L.C.
Florence, KY 41022
Jun 20, 2008 Developed for production of fine products from 150 microns down to 6 microns, ALPHA classifier is particularly suited for mineral and chemical dry powders. Depending on fineness required, it can be fed by gravity from top or in main airstream from below, and can be customized with stainless steel, ceramic, or polyurethane for wear protection and specific material requirements. Unit is offered with various options to meet range of air classification needs.

Expo Technologies, Inc.
Chagrin Falls, OH 44022
Jun 19, 2008 Certified to IECEx and ATEX while featuring FM and cULus approvals, MiniPurge systems suit oilfield, pharmaceutical, and similar industries where there can be potential explosive mixture of gas and dust. They feature certification to IEC 60079-2 (Zone 1, 2 - Gas) as well as IEC 61241-4 (Zone 21, 22 - Dust). Products are also available to North American standards as well as Zone 1, 21 - Ex px/Ex pD; Zone 1, 21 - Ex py/Ex pD; and Zone 2, 22 - Ex pz/Ex pD.

Mono Nov Group
Manchester M34 5JA  United Kingdom
Jun 18, 2008 With capacity of up to 16,000 m³/hr, Discam can capture up to 95% of solids at 5 or 9 mm aperture sizes. It combines self-cleaning Discreen® with high torque Muncher, requiring no manual attendance/cleaning, and features high-flow side rail which increases fluid velocity through Muncher. Available in range of channel depths with 1,000, 1,500, and 2,000 mm options as standard, unit can be retrofitted into existing sewage pump stations or inlet works, as well as installed in new build facilities.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Jun 03, 2008 Intended for for heavy prison and institutional wastewater applications, Spiralift® SLX screens, washes, conveys, and compacts wastewater solids in one integrated system. System includes 15 hp TASKMASTERR TM1630 shredder, screen, solenoid valve, spray wash manifold, level sensor, and PLC-based control system in NEMA 4x enclosure for effectively handling concentrated solids including clothing, sneakers, sheets, blankets, wood, and other debris that clog and cause backups.

Kason Corporation
Millburn, NJ 07041
May 08, 2008 Model K30-2-SS 30 in. dia circular vibratory screener integrated with Model K40/48-1FBD-SS 40 in. dia circular fluid bed dryer remove off-size particles while dewatering and drying on-size material. System removes up to 50 gpm of water and dries up to 700 lb of on-size particles per hr. Screener is equipped with imbalanced-weight gyratory motor that vibrates screening chamber, which is suspended on springs. Circular fluid bed dryer requires only one air inlet and outlet.